Fig. 1. Circuit diagram of IPT system.
Fig. 2. Various structure of transceiver coils.
Fig. 3. Magnetic flux density according to coil structure.
Fig. 4. Experimental environment of IPT system.
Fig. 5. Distance measurement between coils.
Fig. 6. Coupling coefficient vs distance (a)∼(d), System efficiency vs distance (e)∼(h).
Fig. 7. Coupling coefficient vs distance (a)∼(d), System efficiency vs distance (e)∼(h).
Fig. 8. Key Waveform of IPT system.
TABLE I NUMBER OF TURNS EACH COIL
TABLE II IPT SYSTEM DESIGN PARAMETERS
References
- T. Y. Eom, C. S. Oh, and S. J. Park, “Wireless power transfer technologies trends,” Journal of Energy Engineering, Vol. 24, No. 2, pp. 174-178, 2015. https://doi.org/10.5855/ENERGY.2015.24.2.174
- D. G. Woo, "Optimal design and control strategy of inductive power transfer charging system for electric vehicles," Sungkyunkwan University, Ph.D Thesis paper, 2015.
- A. Zaheer, H. Hao, G. A. Covic, and D. Kacprzak, "Investigation of multiple decoupled coil primary pad topologies in lumped IPT systems for interoperable electric vehicle charging," IEEE Trans. Power Electron., Vol. 30, No. 4, pp. 1937-1955, Apr. 2015. https://doi.org/10.1109/TPEL.2014.2329693
- M. Budhia, J. T. Boys, G. A. Covic, and C. Y. Huang, “Development of a singlesided flux magnetic coupler for electric vehicle IPT charging systems,” IEEE Trans. Ind. Electron., Vol. 60, No. 1, pp. 318-328, Jan. 2013. https://doi.org/10.1109/TIE.2011.2179274
- A. Zaheer, D. Kacprzak, and G. A. Covic, "A bipolar receiver pad in a lumped IPT system for electric vehicle charging applications," in Proc. IEEE Energy Conversion Congress and Exposition (ECCE), pp. 283-290, Sep. 2012.
- M. R. Basar, M. Y. Ahmad, J. Cho, and F. Ibrahim, "A 3-coil wireless power transfer system with fine tuned power amplifier for biomedical capsule," in IEEE Asia Pacific Microwave Conference (APMC), pp. 142-145, 2017.
- S. Aldhaher, P. D. Mitcheson, J. M. Arteaga, G. Kkelis, and D. C. Yates, "Light-weight wireless power transfer for mid-air charging of drones," in 11th European Conference ntennas and Propagation (EUCAP), pp. 336-340, 2017.
- A. A. S. Mohamed, S. An, and O. Mohammed, "Coil design optimization of power pad in IPT system for electric vehicle applications," IEEE Transactions on Magnetics, Vol. 54, No. 4, Apr. 2018.
- B. Waters, B. Mahoney, G. Lee, and J. Smith, "Optimal coil size ratios for wireless power transfer applications," in Proc. IEEE Int. Symp. Circuits Syst., pp. 2045-2048, Jun. 2014.
- E. B. Rosa, “Calculation of the self-inductances of single-layer coils,” Bulletin of the Bureau of Standards, Vol. 2, No. 2, pp. 161, 1906. https://doi.org/10.6028/bulletin.034
- J. Zhao, "A new calculation for designing multilayer planar spiral inductors," Article in Edn -Boston then Denver then Highlands Ranch Co-, Vol. 55, No. 14, pp. 37-40, Jul. 2010.
- J. Kim, K. Kim, B. Kim, and J. Kang, "Experimental validation of multi-layer coil inductance estimation method," International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, pp. 1303-1304, 2017.
- S. Mohan, M. Hershenson, S. Boyd, and T. Lee, “Simple accurate expressions for planar spiral inductances,” IEEE Journal of solid-state circuits, Vol. 34, No. 10, pp. 1419-1424, Oct. 1999. https://doi.org/10.1109/4.792620
- W. G. Hurley and M. C. Duffy, "Calculation of self and mutual impedances in planar magnetic structures," IEEE Transactions on Magnetics, Vol. 31, No. 4, pp. 2416-2422, Jul. 1995. https://doi.org/10.1109/20.390151