Smart Structures and Systems

  • 제23권4호
  • /
  • Pages.329-335
  • /
  • 2019
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of flexural and shear stresses simultaneously for optimized design of butterfly-shaped dampers: Computational study

  • Farzampour, Alireza (Department of Civil and Environmental Engineering, Virginia Tech) ;
  • Eatherton, Matthew R. (Department of Civil and Environmental Engineering, Virginia Tech) ;
  • Mansouri, Iman (Department of Civil Engineering, Birjand University of Technology) ;
  • Hu, Jong Wan (Department of Civil and Environmental Engineering, Incheon National University)
  • 투고 : 2018.10.28
  • 심사 : 2019.03.12
  • 발행 : 2019.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Structural fuses are made up from oriented steel plates to be used to resist seismic force with shear loading resistance capabilities. The damage and excessive inelastic deformations are concentrated in structural fuses to avoid any issues for the rest of the surrounding elements. Recently developed fuse plates are designed with engineered cutouts leaving flexural or shear links with controlled yielding features. A promising type of link is proposed to align better bending strength along the length of the link with the demand moment diagram is a butterfly-shaped link. Previously, the design methodologies are purely based on the flexural stresses, or shear stresses only, which overestimate the dampers capability for resisting against the applied loadings. This study is specifically focused on the optimized design methodologies for commonly used butterfly-shaped dampers. Numerous studies have shown that the stresses are not uniformly distributed along the length of the dampers; hence, the design methodology and the effective implementation of the steel need revisions and improvements. In this study, the effect of shear and flexural stresses on the behavior of butterfly-shaped links are computationally investigated. The mathematical models based on von-Mises yielding criteria are initially developed and the optimized design methodology is proposed based on the yielding criterion. The optimized design is refined and investigated with the aid of computational investigations in the next step. The proposed design methodology meets the needs of optimized design concepts for butterfly-shaped dampers considering the uniform stress distribution and efficient use of steel.

키워드

과제정보

연구 과제 주관 기관 : Incheon National University

참고문헌

  1. Ashtari, A. and Erfani, S. (2016), "An analytical model for shear links in eccentrically braced frames", Steel Compos. Struct., 22(3), 627-645. https://doi.org/10.12989/scs.2016.22.3.627
  2. Daie, M., Jalali, A., Suhatril, M., Shariati, M., Arabnejad Khanouki, M.M., Shariati, A. and Kazemi-Arbat, P. (2011), "A new finite element investigation on pre-bent steel strips as damper for vibration control", Int. J. Phys. Sci., 6(36), 8044-8050.
  3. Di Lauro, F., Montuori, R., Nastri, E. and Piluso, V. (2019), "Partial safety factors and overstrength coefficient evaluation for the design of connections equipped with friction dampers", Eng. Struct., 178, 645-655. https://doi.org/10.1016/j.engstruct.2018.10.052
  4. Eldin, M.N., Kim, J. and Kim, J. (2018), "Optimum distribution of steel slit-friction hybrid dampers based on life cycle cost", Steel Compos. Struct., 27(5), 633-646. https://doi.org/10.12989/SCS.2018.27.5.633
  5. Farahi Shahri, S. and Mousavi, S.R. (2018), "Seismic behavior of beam-to-column connections with elliptic slit dampers", Steel Compos. Struct., 26(3), 289-301. https://doi.org/10.12989/SCS.2018.26.3.289
  6. Farzampour, A. and Eatherton, M.R. (2018a). "Investigating limit states for butterfly-shaped and straight shear links", Proceedings of the 16th European Conference on Earthquake Engineering, 16ECEE, Thessaloniki, Greece.
  7. Farzampour, A. and Eatherton, M.R. (2018b). "Parametric study on butterfly-shaped shear links with various geometries", Proceedings of the 11th National Conference on Earthquake Engineering, 11NCEE, Los Angeles, USA.
  8. Hitaka, T. and Matsui, C. (2006). "Seismic performance of Steel Shear Wall with Slits integrated with multi story composite moment frame", Proceedings of the 5th International Conference on Behaviour of Steel Structures in Seismic Areas, STESSA 2006, Yokohama, Japan, 241-246.
  9. Ke, K. and Yam, M.C.H. (2016), "Energy-factor-based damagecontrol evaluation of steel MRF systems with fuses", Steel Compos. Struct., 22(3), 589-611. https://doi.org/10.12989/scs.2016.22.3.589
  10. Kim, J., Kim, M. and Eldin, M.N. (2018), "Optimal distribution of steel plate slit dampers for seismic retrofit of structures", Steel Compos. Struct., 25(4), 473-484. https://doi.org/10.12989/SCS.2017.25.4.473
  11. Kim, J. and Shin, H. (2017), "Seismic loss assessment of a structure retrofitted with slit-friction hybrid dampers", Eng. Struct., 130, 336-350. https://doi.org/10.1016/j.engstruct.2016.10.052
  12. Latour, M. (2017), "Recent advances in the technologies of connection for panel structures: Design and cost analysis of different solutions with X-shaped dissipative connectors", Adv. Struct. Eng., 20(3), 299-315. https://doi.org/10.1177/1369433216649397
  13. Latour, M. and Rizzano, G. (2016), "Recent advances in the technologies of connection for panel structures: Development of an hysteretic damper for industrial buildings", Recent Pat. Eng., 10(2), 128-137.
  14. Lee, C.H., Ju, Y.K., Min, J.K., Lho, S.H. and Kim, S.D. (2015), "Non-uniform steel strip dampers subjected to cyclic loadings", Eng. Struct., 99, 192-204. https://doi.org/10.1016/j.engstruct.2015.04.052
  15. Liu, L., Lei, Y. and He, M. (2015), "Locating and identifying model-free structural nonlinearities and systems using incomplete measured structural responses", Smart Struct. Syst., 15(2), 409-424. https://doi.org/10.12989/sss.2015.15.2.409
  16. Luth, G., Krawinkler, H. and McDonald, B. (2008). "USC School of Cinema: An example of reparable performance based design", Proceedings of the 77th Annual Structural Engineers Association of California (SEAOC) Convention, Structural Engineers Association of Southern California, Fulllerton, CA.
  17. Ma, X., Borchers, E., Pena, A., Krawinkler, H., Billington, S. and Deierlein, G. (2010), "Design and behavior of steel shear plates with openings as energy-dissipating fuses", Report No. 173, The John A. Blume Earthquake Engineering Center, Stanford University, USA.
  18. Mansouri, I., Safa, M., Ibrahim, Z., Kisi, O., Tahir, M.M., Baharom, S. and Azimi, M. (2016), "Strength prediction of rotary brace damper using MLR and MARS", Struct. Eng. Mech., 60(3), 471-488. https://doi.org/10.12989/sem.2016.60.3.471
  19. Martinez-Rueda, J.E. (2002), "On the evolution of energy dissipation devices for seismic design", Earthq. Spectra, 18(2), 309-346. https://doi.org/10.1193/1.1494434
  20. Mirzai, N.M., Attarnejad, R. and Hu, J.W. (2018), "Enhancing the seismic performance of EBFs with vertical shear link using a new self-centering damper", Ing. Sismica, 35(4), 57-76.
  21. Nastri, E., Vergato, M. and Latour, M. (2017), "Performance evaluation of a seismic retrofitted R.C. precast industrial building", Earthq. Struct., 12(1), 13-21. https://doi.org/10.12989/eas.2017.12.1.013
  22. Nuzzo, I., Losanno, D., Caterino, N., Serino, G. and Bozzo Rotondo, L.M. (2018), "Experimental and analytical characterization of steel shear links for seismic energy dissipation", Eng. Struct., 172, 405-418. https://doi.org/10.1016/j.engstruct.2018.06.005
  23. Shad, H., Bin Adnan, A., Vafaei, M., Behbahani, H.P. and Oladimeji, A.M. (2018), "Experimental study on TLDs equipped with an upper mounted baffle", Smart Struct. Syst., 21(1), 37-51. https://doi.org/10.12989/SSS.2018.21.1.037
  24. Shin, M., Kim, S.-P., Halterman, A. and Aschheim, M. (2017), "Seismic toughness and failure mechanisms of reduced websection beams: Phase 1 tests", Eng. Struct., 141, 198-216. https://doi.org/10.1016/j.engstruct.2017.03.016
  25. Sun, B., Wang, M. and Gao, L. (2017), "Design principles for stiffness-tandem energy dissipation coupling beam", Smart Struct. Syst., 20(1), 53-60. https://doi.org/10.12989/SSS.2017.20.1.053
  26. Teruna, D.R., Majid, T.A. and Budiono, B. (2015), "Experimental study of hysteretic steel damper for energy dissipation capacity", Adv. Civil Eng., 2015, 1-12.
  27. Tsai, K.-C., Chen, H.-W., Hong, C.-P. and Su, Y.-F. (1993), "Design of steel triangular plate energy absorbers for seismicresistant construction", Earthq. Spectra, 9(3), 505-528. https://doi.org/10.1193/1.1585727
  28. Vargas, R.E. and Bruneau, M. (2006). "Seismic response and design of buildings with metallic structural fuses", Proceedings of the 5th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), Yokohama, Japan.
  29. Whittaker, A.S., Bertero, V.V., Thompson, C.L. and Alonso, L.J. (1991), "Seismic testing of steel plate energy dissipation devices", Earthq. Spectra, 7(4), 563-604. https://doi.org/10.1193/1.1585644
  30. Zahrai, S.M., Moradi, A. and Moradi, M. (2015), "Using friction dampers in retrofitting a steel structure with masonry infill panels", Steel Compos. Struct., 19(2), 309-325. https://doi.org/10.12989/scs.2015.19.2.309
  31. Zhan, M., Wang, S., Yang, T., Liu, Y. and Yu, B. (2017), "Optimum design and vibration control of a space structure with the hybrid semi-active control devices", Smart Struct. Syst., 19(4), 341-350. https://doi.org/10.12989/sss.2017.19.4.341