DOI QR코드

DOI QR Code

Introducing a precast moment resistant beam-to-column concrete connection comparable with in-situ one

  • Received : 2018.07.15
  • Accepted : 2019.03.11
  • Published : 2019.03.25

Abstract

Precast reinforced concrete structure (PRCS) consists of prefabricated members assembled at worksites and has more connections limitations in comparison with the equivalent in-situ reinforced concrete structure (IRCS). As a result of these limitations, PRCSs have less ductility in comparison with IRCSs. Recent studies indicate that the most noticeable failure in PRCSs have occurred in their connection zone. The objective of this study is introducing a type of precast beam-to-column connection (PBC) which in spite of being simple is of the same efficiency and performance as in-situ beam-to-column connection (IBC). To achieve this, the performance of proposed new PBC at exterior joint of a four story PRCS was analyzed by pseudo dynamic analysis and compared with that of IBC in equivalent IRCS. Results indicated that the proposed connection has even better performance in terms of strength, energy dissipation and stiffness, than that of IBC.

Keywords

References

  1. ACI 318-14 (2014), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute Committee, Farmington Hills, MI, USA.
  2. ACI 374.1-05 (2005), Acceptance Criteria for Moment Frames Based on Structural Testing and Commentary, American Concrete Institute Committee, Farmington Hills, MI, USA.
  3. Bradley, B.A., Dahkal, R.P., Mander, J.B. and Li, L. (2008), "Experimental multi-level seismic performance assessment of 3D RC frame designed for damage avoidance", Earthq. Eng. Struct. Dyn., 37(1), 1-20. https://doi.org/10.1002/eqe.741
  4. CEB-FIP Model Code (1990), Committee Euro-International du Beton, Bulletin Information, No. 195, Lausanne, Switzerland.
  5. Chen, W.F. and Saleeb, A.F. (1982), Constitutive Equations for Engineering Materials, Wiley, New York, USA.
  6. Cheng, C.T. (2008), "Seismic behaviour of post tensioned precast reinforced concrete beam-to-column connections", Comput. Concrete, 5(6), 525-544. https://doi.org/10.12989/cac.2008.5.6.525
  7. Choi, H., Choi, Y. and Choi, C. (2013), "Development and testing of precast concrete beam-to-Column connections", Eng. Struct., 56, 1820-1835. https://doi.org/10.1016/j.engstruct.2013.07.021
  8. Fan, L. and Lu, X. (2008), "Investigation on seismic behaviour of jointed precast concrete frame structures", The 14 World Conference on Earthquake Engineering, Bejing, China, October.
  9. Ghayeb, H.H., Razak, H.A. and Sulong, N.H.R. (2017), "Development and testing of hybrid precast concrete beam to column connection under cyclic loading", Constr. Build. Mater., 151, 258-278. https://doi.org/10.1016/j.conbuildmat.2017.06.073
  10. Guan, D., Guo, Z., Xiao, Q. and Zheng, Y. (2016), "Experimental study of a new beam-to-column connection for precast concrete frames under reversal cyclic loading", Adv. Struct. Eng., 19(3), 529-545. https://doi.org/10.1177/1369433216630122
  11. Hawileh, R.A., Rahman, A. and Tabatabai, H. (2010), "Nonlinear finite analysis and modelling of a precast hybrid beam-column connection subjected to cyclic loads", Appl. Math. Model., 34(9), 2562-2583. https://doi.org/10.1016/j.apm.2009.11.020
  12. Hong, W., Kim, S., Park, S., Kim, J., Lee, S., Yoon, K. and Kim, S. (2010), "Composite beam composed of steel and precast concrete (modularized hybrid system)", Struct. Des. Tall Spec. Build., 19, 707-727.
  13. Hordijk, D.A. (1991), "Local approach to fatigue of concrete", Ph.D. Dissertation, Delft University of Technology, Delft, Netherlands.
  14. Im, H., Park, H. and Eom, T. (2013), "Cyclic loading test for reinforced-concrete-emulated beam-column connection of precast concrete moment frame", ACI Struct. J., 110(1), 115-125.
  15. Kataoka, M.N., Ferreira, M.A. and EI Debs, A.L.H.C. (2015), "Study on the behaviour of beam-column connection in precast concrete structure", Comput. Concrete, 16(1), 163-178. https://doi.org/10.12989/cac.2015.16.1.163
  16. Kupfer, H.B. and Gerstle, K.H. (1973), "Behaviour of concrete under biaxial stress", ASCE J. Eng. Mech. Div., 99(4), 853-866. https://doi.org/10.1061/JMCEA3.0001789
  17. Lee, H.J. and Yu, S.Y. (2009), "Cyclic response of exterior beamcolumn joints with different anchorage methods", ACI Struct. J., 106(3), 329-339.
  18. Maya, L., Zanuy, C., Albajar, L., Lopez, C. and Portabella, J. (2013), "Experimental assessment of connections for precast concrete frames using ultra high performance fiber reinforced concrete construction", Constr. Build. Mater., 48, 173-186. https://doi.org/10.1016/j.conbuildmat.2013.07.002
  19. PCI Hand Book (2010), Precast and Prestressed Concrete Institute, Design Handbook, PCI Industry Handbook Committee, Chicago, IL, USA.
  20. Rodriguez, M.E. and Torres, M.M. (2013), "Seismic behaviour of a type of welded precast concrete beam-to-column connection", PCI J., 73(3), 81-94. https://doi.org/10.15554/pcij.06012013.81.94
  21. Standard No. 2800 (2014), Iranian Code of Practice for Seismic Resistant Design of Buildings, Iranian Building Codes and Standards, Tehran, Iran.
  22. Van Mier, J.G.M. (1986), "Multi-axial strain-softening of concrete, part I: fracture, part II: load histories", Mater. Struct., 19(111), 179-191. https://doi.org/10.1007/BF02472034