Steel and Composite Structures

  • 제30권5호
  • /
  • Pages.417-432
  • /
  • 2019
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping

  • Sajedi, Fathollah (Department of Civil Engineering, Ahvaz Branch, Islamic Azad University) ;
  • Shariati, Mahdi (Faculty of Civil Engineering, University of Tabriz)
  • 투고 : 2018.11.04
  • 심사 : 2019.03.01
  • 발행 : 2019.03.10
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents the results of axial compression testing and numerical modeling on reinforced concrete columns (RCC) with normal concrete (NC) and high-strength concrete (HSC), RCC confined by glass-fiber reinforced plastic pipes (GRP) casing as well as carbon fiber reinforced polymer (CFRP), The major parameters evaluated in the experiments were the effects of concrete type, GRP casing and CFRP wrapping, as well as the number of CFRP layers. 12 cylindrical RCC ($150{\times}600mm$) were prepared and divided into two groups, NC and HSC. Each group was divided into two parts; with and without GRP casing. In each part, one column was without CFRP strengthening layer, a column was wrapped with one CFRP layer and another column with two CFRP layers. All columns were tested under concentrated compression load. Numerical modeling was performed using ABAQUS software and the results of which were compared with experimental findings. A good agreement was found between the results. Results indicated that the utilization of CFRP wrapping and GRP casing improved compression capacity and ductility of RCC. The addition of one and two layer-FRP wrapping increased capacity in the NC group to an average of 18.5% and 26.5% and in the HSC group to an average of 10.2% and 24.8%. Meanwhile, the utilization of GRP casing increased the capacity of the columns by 3 times in the NC group and 2.38 times in the HSC group. The results indicated that although both CFRP wrapping and GRP casing increased confinement, the GRP casing gave more increase capacity and ductility of the RCC due to higher confinement. Furthermore, the confinement effect was higher on NC group.

키워드

참고문헌

  1. ABAQUS, A.S. (2011), User's manual; Version 6.11. 1. Dassaults Systemes Inc.
  2. ACI 211 (1991), Standard practice for selecting proportions for normal, heavyweight and mass concrete.
  3. Abedini, M., Khlaghi, E.A., Mehrmashhadi, J., Mussa, M.H., Ansari, M. and Momeni, T. (2017), "Evaluation of Concrete Structures Reinforced with Fiber Reinforced Polymers Bars: A Review", J. Asian Sci. Res., 7(5), 165.
  4. Aghaee, K. and Foroughi, M. (2013), "Mechanical properties of lightweight concrete partition with a core of textile waste", Adv. Civil Eng., 1-7.
  5. Almusallam, T.H. (2007), "Behavior of normal and high-strength concrete cylinders confined with E-glass/epoxy composite laminates", Compos. Part B: Eng., 38(5-6), 629-639. https://doi.org/10.1016/j.compositesb.2006.06.021
  6. Andalib, Z., Kafi, M.A., Bazzaz, M. and Momenzadeh, S. (2018), "Numerical evaluation of ductility and energy absorption of steel rings constructed from plates", Eng. Struct., 169, 94-106. https://doi.org/10.1016/j.engstruct.2018.05.034
  7. Ardalan, R.B., Joshaghani, A. and Hooton, R.D. (2017), "Workability retention and compressive strength of selfcompacting concrete incorporating pumice powder and silica fume", Constr. Build. Mater., 134, 116-122. https://doi.org/10.1016/j.conbuildmat.2016.12.090
  8. ASTM, B. (2001), D2996-Standard Specification for Filament-Wound Fiberglass; Glass-Fiber-Reinforced Thermosetting-Resin Pipe.
  9. Bazzaz, M., Darabi, M.K., Little, D.N. and Garg, N. (2018), "A straightforward procedure to characterize nonlinear viscoelastic response of asphalt concrete at high temperatures", Proceedings of the Transportation Research Record, Transportation Research Board 96th Annual Meeting. http://journals.sagepub.com/doi/abs/10.1177/0361198118782033
  10. Csuka, B. and Kollar, L.P. (2010), "FRP-confined circular concrete columns subjected to concentric loading", J. Reinf. Plast. Compos., 29(23), 3504-3520. https://doi.org/10.1177/0731684410381448
  11. Dundar, C., Erturkmen, D. and Tokgoz, S. (2015), "Studies on carbon fiber polymer confined slender plain and steel fiber reinforced concrete columns", Eng. Struct., 102, 31-39. https://doi.org/10.1016/j.engstruct.2015.08.011
  12. Goodarzi, A., Mehrmashhadi, J. and Esmailzadeh, E. (2009), "Optimised braking force distribution strategies for straight and curved braking", Int. J. Heavy Vehicle Syst., 16(1), 78. https://doi.org/10.1504/IJHVS.2009.023856
  13. Hamidian, M., Shariati, M., Arabnejad, M. and Sinaei, H. (2011), "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique", Int. J. Phys. Sci., 6(22), 5261-5266.
  14. Hamidian, M., Shariati, A., Khanouki, M.M.A., Sinaei, H., Toghroli, A. and Nouri, K. (2012), "Application of Schmidt rebound hammer and ultrasonic pulse velocity techniques for structural health monitoring", Sci. Res. Essays, 7(21), 1997-2001.
  15. Jiang, S.-F., Ma, S.-L. and Wu, Z.-Q. (2014), "Experimental study and theoretical analysis on slender concrete-filled CFRP-PVC tubular columns", Constr. Build. Mater., 53, 475-487. https://doi.org/10.1016/j.conbuildmat.2013.11.089
  16. Joshaghani, A. (2017), "The effect of trass and fly ash in minimizing alkali-carbonate reaction in concrete", Constr. Build. Mater., 150, 583-590. https://doi.org/10.1016/j.conbuildmat.2017.06.034
  17. Kazemi, M.T., Momenzadeh, S.-B. and Hoseinzadehasl, M. (2012), "Study of reduced beam section connections with web opening", Proceedings of the 15th World Conference on Earthquake Engineering, Lisbon, September.
  18. Kent, D.C. and Park, R. (1971), "Flexural members with confined concrete", J. Struct. Div.
  19. Khairallah, F. (2013), "Mechanical behavior of confined selfcompacting reinforced concrete circular columns under concentric axial loading", Ain Shams Eng. J., 4(4), 641-649. https://doi.org/10.1016/j.asej.2013.01.009
  20. Khanouki, M.M.A., Ramli Sulong, N.H., Shariati, M. and Tahir, M.M. (2016), "Investigation of through beam connection to concrete filled circular steel tube (CFCST) column", J. Constr. Steel Res., 121, 144-162. DOI: http://dx.doi.org/10.1016/j.jcsr.2016.01.002
  21. Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M. (2017), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., Int. J., 63(2), 259-268.
  22. Khorramian, K., Maleki, S., Shariati, M. and Ramli Sulong, N.H. (2015), "Behavior of Tilted Angle Shear Connectors", PLOS ONE, 10(12), 1-11. DOI: 10.1371/journal.pone.0144288
  23. Kumutha, R., Vaidyanathan, R. and Palanichamy, M. (2007), "Behaviour of reinforced concrete rectangular columns strengthened using GFRP", Cement Concrete Compos., 29(8), 609-615. https://doi.org/10.1016/j.cemconcomp.2007.03.009
  24. Lam, L. and Teng, J. (2003), "Design-oriented stress-strain model for FRP-confined concrete", Constr. Build. Mater., 17(6-7), 471-489. https://doi.org/10.1016/S0950-0618(03)00045-X
  25. Le, H.T.N., Poh, L.H., Wang, S. and Zhang, M.-H. (2017), "Critical parameters for the compressive strength of highstrength concrete", Cement Concrete Compos., 82, 202-216. https://doi.org/10.1016/j.cemconcomp.2017.06.008
  26. Mander, J.B., Priestley, M.J. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  27. Mohammadhassani, M., Akib, S., Shariati, M., Suhatril, M. and Arabnejad Khanouki, M.M. (2014a), "An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio", Eng. Fail. Anal., 41, 73-80. DOI: http://dx.doi.org/10.1016/j.engfailanal.2013.08.014
  28. Mohammadhassani, M., Nezamabadi-pour, H., Suhatril, M. and Shariati, M. (2014b), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., Int. J., 14(5), 785-809. https://doi.org/10.12989/sss.2014.14.5.785
  29. Mohammadhassani, M., Saleh, A., Suhatril, M. and Safa, M. (2015), "Fuzzy modelling approach for shear strength prediction of RC deep beams", Smart Struct. Syst., Int. J., 16(3), 497-519. https://doi.org/10.12989/sss.2015.16.3.497
  30. Momenzadeh, S., Seker, O., Faytarouni, M. and Shen, J. (2017), "Seismic performance of all-steel buckling-controlled braces with various cross-sections", J. Constr. Steel Res., 139, 44-61. https://doi.org/10.1016/j.jcsr.2017.09.003
  31. Paknahad, M., Shariati, M., Sedghi, Y., Bazzaz, M. and Khorami, M. (2018), "Shear capacity equation for channel shear connectors in steel-concrete composite beams", Steel Compos. Struct., Int. J., 28(4), 483-494.
  32. Park, R. and Paulay, T. (1975), Reinforced Concrete Structures, John Wiley & Sons Inc.
  33. Parvin, A. and Jamwal, A.S. (2005), "Effects of wrap thickness and ply configuration on composite-confined concrete cylinders", Compos. Struct., 67(4), 437-442. https://doi.org/10.1016/j.compstruct.2004.02.002
  34. Pessiki, S., Harries, K.A., Kestner, J.T., Sause, R. and Ricles, J.M. (2001), "Axial behavior of reinforced concrete columns confined with FRP jackets", J. Compos. Constr., 5(4), 237-245. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:4(237)
  35. Plastics, A.C.D.-o. (2010), Standard test method for tensile properties of plastics; ASTM International.
  36. Rahai, A., Sadeghian, P. and Ehsani, M.R. (2008), "Experimental behavior of concrete cylinders confined with CFRP composites", Proceedings of the 14th World Conference on Earthquake Engineering.
  37. Saafi, M., Toutanji, H.A. and Li, Z. (1999), "Behavior of concrete columns confined with fiber reinforced polymer tubes" ACI Mater. J., 96(4), 500-509.
  38. Sadeghipour Chahnasir, E., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., Int. J., 22(4), 413-424.
  39. Samaan, M., Mirmiran, A. and Shahawy, M. (1998), "Model of concrete confined by fiber composites", J. Struct. Eng., 124(9), 1025-1031. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:9(1025)
  40. Shahawy, M., Mirmiran, A. and Beitelman, T. (2000), "Tests and modeling of carbon-wrapped concrete columns", Compos. Part B: Eng., 31(6-7), 471-480. https://doi.org/10.1016/S1359-8368(00)00021-4
  41. Sharbatdar, M.K.B., Kashiha, N. and Zahra, A. (2008), "Behavior of Fiber Concrete under Impact and Explosive Load", Proceedings of the 14th International Civil Engineering Student Conference, Semnan, Iran.
  42. Shariati, M. (2008), "Assessment Building Using Nonedestructive Test Techniques (ultra Sonic Pulse Velocity and Schmidt Rebound Hammer)", Universiti Putra Malaysia, Malaysia.
  43. Shariati, A. (2014), "Behaviour of C-shaped Angle Shear Connectors in High Strength Concrete", M.Sc.; Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya, Malaysia.
  44. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M., Shafigh, P. and Sinaei, H. (2011a), "Assessing the strength of reinforced concrete structures through Ultrasonic Pulse Velocity and Schmidt Rebound Hammer tests", Sci. Res. Essays, 6(1), 213-220.
  45. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Shariati, A. (2011b), "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM'11+), Seoul, South Korea.
  46. Shariati, M., Ramli Sulong, N.H., Sinaei, H., Khanouki, A., Mehdi, M. and Shafigh, P. (2011c), "Behavior of channel shear connectors in normal and light weight aggregate concrete (experimental and analytical study)", Adv. Mater. Res., 168, 2303-2307. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2303
  47. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2012), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331. DOI: 10.1016/j.matdes.2011.08.008
  48. Shariati, M., Shariati, A., Sulong, N.R., Suhatril, M. and Khanouki, M.A. (2014a), "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete", Eng. Fail. Anal., 41, 124-134. https://doi.org/10.1016/j.engfailanal.2014.02.017
  49. Shariati, A., Shariati, M., Ramli Sulong, N.H., Suhatril, M., Arabnejad Khanouki, M.M. and Mahoutian, M. (2014b), "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Constr. Build. Mater., 52, 276-283. DOI: http://dx.doi.org/10.1016/j.conbuildmat.2013.11.036
  50. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Khanouki, M.A. (2015), "Behavior of V-shaped angle shear connectors: experimental and parametric study", Mater. Struct., 1-18. DOI: 10.1617/s11527-015-0762-8
  51. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Kueh, A.B.H. (2016), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Constr. Build. Mater., 120, 382-392. DOI: http://dx.doi.org/10.1016/j.conbuildmat.2016.05.102
  52. Sheikh, S.A. (2002), "Performance of concrete structures retrofitted with fibre reinforced polymers", Eng. Struct., 24(7), 869-879. https://doi.org/10.1016/S0141-0296(02)00025-1
  53. Sinaei, H., Jumaat, M.Z. and Shariati, M. (2011), "Numerical investigation on exterior reinforced concrete Beam-Column joint strengthened by composite fiber reinforced polymer (CFRP)", Int. J. Phys. Sci., 6(28), 6572-6579.
  54. Testing, A.S.f. and Materials (2004), Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes; ASTM International.
  55. Toghroli, A., Darvishmoghaddam, E., Zandi, Y., Parvan, M., Safa, M., Abdullahi, M.A.M., Heydari, A., Wakil, K., Gebreel, S.A. and Khorami, M. (2018a), "Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method", Comput. Concrete, Int. J., 21(5), 525-530.
  56. Toghroli, A., Shariati, M., Sajedi, F., Ibrahim, Z., Koting, S., Tonnizam Mohamad, E. and Khorami, M. (2018b), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst., Int. J., 22(4), 433-440.
  57. Tokgoz, S., Dundar, C. and Tanrikulu, A.K. (2012), "Experimental behaviour of steel fiber high strength reinforced concrete and composite columns", J. Constr. Steel Res., 74, 98-107. https://doi.org/10.1016/j.jcsr.2012.02.017
  58. Vincent, T. and Ozbakkaloglu, T. (2013), "Influence of concrete strength and confinement method on axial compressive behavior of FRP confined high-and ultra high-strength concrete", Compos. Part B: Eng., 50, 413-428. https://doi.org/10.1016/j.compositesb.2013.02.017
  59. Wong, Y., Yu, T., Teng, J. and Dong, S. (2008), "Behavior of FRPconfined concrete in annular section columns", Compos. Part B: Eng., 39(3), 451-466. https://doi.org/10.1016/j.compositesb.2007.04.001
  60. Wu, G., Lu, Z. and Wu, Z. (2006), "Strength and ductility of concrete cylinders confined with FRP composites", Constr. Build. Mater., 20(3), 134-148. https://doi.org/10.1016/j.conbuildmat.2005.01.022
  61. Xiao, Y. and Wu, H. (2000), "Compressive behavior of concrete confined by carbon fiber composite jackets", J. Mater. Civil Eng., 12(2), 139-146. https://doi.org/10.1061/(ASCE)0899-1561(2000)12:2(139)
  62. Xiao, J., Tresserras, J. and Tam, V.W. (2014), "GFRP-tube confined RAC under axial and eccentric loading with and without expansive agent", Constr. Build. Mater., 73, 575-585. https://doi.org/10.1016/j.conbuildmat.2014.09.038
  63. Youssef, M.N., Feng, M.Q. and Mosallam, A.S. (2007), "Stress- strain model for concrete confined by FRP composites", Compos. Part B: Eng., 38(5-6), 614-628. https://doi.org/10.1016/j.compositesb.2006.07.020

피인용 문헌

  1. Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS) vol.34, pp.1, 2019, https://doi.org/10.12989/scs.2020.34.1.155
  2. Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines vol.34, pp.3, 2019, https://doi.org/10.12989/scs.2020.34.3.347
  3. Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines vol.34, pp.3, 2019, https://doi.org/10.12989/scs.2020.34.3.377
  4. The effect of RBS connection on energy absorption in tall buildings with braced tube frame system vol.34, pp.3, 2019, https://doi.org/10.12989/scs.2020.34.3.393
  5. Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns vol.34, pp.5, 2019, https://doi.org/10.12989/scs.2020.34.5.743
  6. Elevated temperature resistance of concrete columns with axial loading vol.9, pp.4, 2019, https://doi.org/10.12989/acc.2020.9.4.355
  7. Computational analysis of three dimensional steel frame structures through different stiffening members vol.35, pp.2, 2019, https://doi.org/10.12989/scs.2020.35.2.187
  8. Effect of progressive shear punch of a foundation on a reinforced concrete building behavior vol.35, pp.2, 2019, https://doi.org/10.12989/scs.2020.35.2.279
  9. Influence of porosity and cement grade on concrete mechanical properties vol.10, pp.5, 2019, https://doi.org/10.12989/acc.2020.10.5.393
  10. An analytical model for PVC-FRP confined reinforced concrete columns under low cyclic loading vol.77, pp.2, 2021, https://doi.org/10.12989/sem.2021.77.2.179
  11. Optimization algorithms for composite beam as smart active control of structures using genetic algorithms vol.27, pp.6, 2019, https://doi.org/10.12989/sss.2021.27.6.1041
  12. Assessment of microstructure and surface effects on vibrational characteristics of public transportation vol.11, pp.1, 2021, https://doi.org/10.12989/anr.2021.11.1.101
  13. Smart estimation of automatic approach in enhancing the road safety under AASHTO Standard specification and STM vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.389
  14. Experimental study of reversal of multidrug resistance in human leukemia K562/DOX cells by toad venom vol.11, pp.2, 2019, https://doi.org/10.12989/anr.2021.11.2.219
  15. Application of multi-hybrid metaheuristic algorithm on prediction of split-tensile strength of shear connectors vol.28, pp.2, 2019, https://doi.org/10.12989/sss.2021.28.2.167