DOI QR코드

DOI QR Code

Assessment of reliability-based FRP reinforcement ratio for concrete structures with recycled coarse aggregate

  • Ju, Minkwan (Department of Civil and Environmental Engineering, Yonsei University) ;
  • Park, Kyoungsoo (Department of Civil and Environmental Engineering, Yonsei University) ;
  • Lee, Kihong (Department of Civil and Environmental Engineering, Hanyang University) ;
  • Ahn, Ki Yong (Department of Civil and Environmental Engineering, Hanyang University) ;
  • Sim, Jongsung (Department of Civil and Environmental Engineering, Hanyang University)
  • 투고 : 2018.11.26
  • 심사 : 2019.01.21
  • 발행 : 2019.02.25

초록

The present study assessed the reliability-based reinforcement ratio of FRP reinforced concrete structure applying recycled coarse aggregate (RCA) concrete. The statistical characteristics of FRP bars and RCA concrete were investigated from the previous literatures and the mean value and standard deviation were employed for the reliability analysis. The statistics can be regarded as the material uncertainty for configuring the probability distribution model. The target bridge structure is the railway bridge with double T-beam section. The replacement ratios of RCA were 0%, 30%, 50%, and 100%. From the probability distribution analysis, the reliability-based reinforcement ratios of FRP bars were assessed with four cases according to the replacement ratio of RCA. The reinforcement ratio of FRP bars at RCA 100% showed about 17.3% higher than the RCA 0%, where the compressive strength at RCA 100% decreased up to 27.5% than RCA 0%. It was found that the decreased effect of the compressive strength of RCA concrete could be compensated with increase of the reinforcement ratio of FRP bars. This relationship obtained by the reliability analysis can be utilized as a useful information in structural design for FRP bar reinforced concrete structures applying RCA concrete.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea (NRF)

참고문헌

  1. AASHTO LRFD Bridge Design Specifications (2014), American Association of State Highway and Transportation Officials (AASHTO), Washington, D.C., U.S.A.
  2. Abdul-Salam, B., Farghaly A.S. and Benmokrane B. (2016), "Mechanisms of shear resistance of one-way concrete slabs reinforced with FRP bars", Constr. Build. Mater., 127(30), 959-970. https://doi.org/10.1016/j.conbuildmat.2016.10.015
  3. ACI440 Committee (2015), Guide for the Design and Construction of Concrete Reinforced with FRP Bars (ACI440.1R-15), American Concrete Institute, Farmington Hills, Michigan, U.S.A.
  4. Ahmed, E.A., El-Salakawy, E.F. and Benmokrane, B. (2010), "Performance evaluation of GFRP shear reinforcement for concrete beams", ACI Struct. J., 107(1), 53-62.
  5. Ajdukiewicz, A. and Kliszczewicz, A. (2002), "Influence of recycled aggregates on mechanical properties of HS/HPC", Cement Concrete Compos., 24(2), 269-279. https://doi.org/10.1016/S0958-9465(01)00012-9
  6. Arioglu, N., Girgin Canan, Z. and Arioglu, E. (2006), "Evaluation of ratio between splitting tensile strength and compressive strength for concretes up to 120 MPa and its application in strength criterion", ACI Mater. J., 103, 18-24.
  7. Arora, S. and Singh, S.P. (2016), "Analysis of flexural fatigue failure of concrete made with 100% coarse recycled concrete aggregates", Constr. Build. Mater., 102(15), 782-791. https://doi.org/10.1016/j.conbuildmat.2015.10.098
  8. Bouguerra, K., Ahmed, E.A., El-Gamal, S. and Benmokrane, B. (2011), "Testing of full-scale concrete bridge deck slabs reinforced with fiber-reinforced polymer (FRP) bars", Constr. Build. Mater., 25(10), 3956-3965. https://doi.org/10.1016/j.conbuildmat.2011.04.028
  9. Choi, H.B., Shin, Y.S., An, S.H., Chung, H.S. and Kang, K.I. (2007), "A properties and durability of recycled aggregate concrete", J. Architect. Inst. Kor. Struct. Constr., 23(9), 125-132.
  10. Corinaldesi, V. (2010), "Mechanical and elastic behaviour of concretes made of recycled-concrete coarse aggregates", Constr. Build. Mater., 24(9), 1616-1620. https://doi.org/10.1016/j.conbuildmat.2010.02.031
  11. Deng F., He, Y., Zhou, S., Yu, Y., Cheng, H. and Wu, X. (2018), "Compressive strength prediction of recycled concrete based on deep learning", Constr. Build. Mater., 175(30), 562-569. https://doi.org/10.1016/j.conbuildmat.2018.04.169
  12. Duan, Z.H. and Poon, C.S. (2014), "Properties of recycled aggregate concrete made with recycled aggregates with different amounts of old adhered mortars", Mater. Des., 58, 19-29. https://doi.org/10.1016/j.matdes.2014.01.044
  13. El-Nemr, A., Ahmed, E.A., El-Safty, A. and Benmokrane, B. (2018), "Evaluation of the flexural strength and serviceability of concrete beams reinforced with different types of GFRP bars", Eng. Struct., 173(15), 606-619. https://doi.org/10.1016/j.engstruct.2018.06.089
  14. Jeon, E., Yun, H.D., Ji, S.K., Choi, K.S., You, Y.C. and Kim, K.H. (2009), "Mechanical properties of ready-mixed concrete with recycled coarse aggregates", J. Architect. Inst. Kor. Struct. Constr., 25(8), 103-110.
  15. Ju, M., Oh, H. and Sun, J.W. (2014), "Simplified reliability estimation for optimum strengthening ratio of 30-year-old double T-beam railway bridge by NSM techniques", Math. Probl. Eng., 2014, 734016.
  16. Ju, M., Park, K. and Park, C. (2018), "Punching shear behavior of two-way concrete slabs reinforced with glass-fiber-reinforced polymer (GFRP) bars", Polym., 10(8), 893. https://doi.org/10.3390/polym10080893
  17. Ju, M., Park, Y. and Park, C. (2017), "Cracking control comparison in the specifications of serviceability in cracking for FRP reinforced concrete beams", Compos. Struct., 182(15), 674-684. https://doi.org/10.1016/j.compstruct.2017.09.016
  18. Keum, J.J., Jang, H.S., Hong, S.U., Lee, Y.T. and Cho, Y.S. (2011), "A study on the comparison of compressive strength of concrete with mixed fly ash according to the replacement ratio of recycled coarse aggregate", Proceeding of the Architectural Institute of Korea, 31(2), 289-290.
  19. Korea Construction Specification (KSC 14 20 21:2016) (2016), Recycled Aggregate Concrete, Ministry of Land, Infrastructure and Transport of Korea.
  20. Kurda, R., Brito, J. and Silvestre, J.D. (2018), "Indirect evaluation of the compressive strength of recycled aggregate concrete with high fly ash ratios", Mag. Concrete Res., 70(4), 204-216. https://doi.org/10.1680/jmacr.17.00216
  21. Kwan, W.H., Ramli, M., Kam, K.J. and Sulieman, M.Z. (2012), "Influence of the amount of recycled coarse aggregate in concrete design and durability properties", Constr. Build. Mater., 26(1), 565-573. https://doi.org/10.1016/j.conbuildmat.2011.06.059
  22. Lee, B.C., Lee, J., Cho, Y.K. and Jung, S.H. (2015), "The strength and length change properties of recycled aggregate concrete (RAC) by compressive strength levels", J. Kor. Recycled Constr. Res. Inst., 3(4), 307-312. https://doi.org/10.14190/JRCR.2015.3.4.307
  23. Li, T., Zhu, H., Wang, Q., Li, J. and Wu, T. (2018), "Experimental study on the enhancement of additional ribs to the bond performance of FRP bars in concrete", Constr. Build. Mater., 185(10), 545-554. https://doi.org/10.1016/j.conbuildmat.2018.06.198
  24. Malesev, M., Radonjanin, V. and Marinkovic, S. (2010), "Recycled concrete as aggregate for structural concrete production", Sustainab., 2(5), 1204-1225. https://doi.org/10.3390/su2051204
  25. Maranan, G.B., Manalo, A.C., Benmokrane, B., Karunasena, W. and Mendis, P. (2015), "Evaluation of the flexural strength and serviceability of geopolymer concrete beams reinforced with glass-fibre-reinforced polymer (GFRP) bars", Eng. Struct., 101(15), 529-541. https://doi.org/10.1016/j.engstruct.2015.08.003
  26. Medina, C., Zhu, W., Howind, T., De Rojas, M.I.S. and Frias, M. (2014), "Influence of mixed recycled aggregate on the physical- mechanical properties of recycled concrete", J. Clean. Prod., 68, 216-225. https://doi.org/10.1016/j.jclepro.2014.01.002
  27. Montero, J. and Laserna, S. (2017), "Influence of effective mixing water in recycled concrete", Constr. Build. Mater., 132, 343-352. https://doi.org/10.1016/j.conbuildmat.2016.12.006
  28. Nanni, A. (2001), "Relevant field applications of FRP composites in concrete structures", J. Struct. Eng., 119(11), 3344-3359. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:11(3344)
  29. Pantelides, C.P., Liu, R. and Reaveley, L.D. (2012), "One-way shear behavior of lightweight concrete panels reinforced with GFRP bars", J. Compos. Constr., 16(1), 2-9. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000240
  30. Pilakoutas, K., Neocleous, K. and Guadagnini, M. (2002), "Design philosophy issues of fibre reinforced polymer reinforced concrete structures", J. Compos. Constr., 6(3), 154-61. https://doi.org/10.1061/(ASCE)1090-0268(2002)6:3(154)
  31. Poon, C., Shui, Z., Lam, L., Fok, H. and Kou, S. (2004), "Influence of moisture states of natural and recycled aggregates on the slump and compressive strength of concrete", Cement Concrete Res., 34(1), 31-36. https://doi.org/10.1016/S0008-8846(03)00186-8
  32. Qin, R., Zhou, A. and Lau, D. (2017), "Effect of reinforcement ratio on the flexural performance of hybrid FRP reinforced concrete beams", Compos. Part B: Eng., 108(1), 200-209. https://doi.org/10.1016/j.compositesb.2016.09.054
  33. Rahal, K. (2007), "Mechanical properties of concrete with recycled coarse aggregate", Build. Environ., 42(1), 407-415. https://doi.org/10.1016/j.buildenv.2005.07.033
  34. Rao, M.C., Bhattacharyya, S. and Barai, S. (2011), "Influence of field recycled coarse aggregate on properties of concrete", Mater. Struct., 44(1), 205-220. https://doi.org/10.1617/s11527-010-9620-x
  35. Schubert, S., Hoffmann, Cathleen, Leemann, A., Moser, K. and Motavalli, M. (2012), "Recycled aggregate concrete: Experimental shear resistance of slabs without shear reinforcement", Eng. Struct., 41, 490-497. https://doi.org/10.1016/j.engstruct.2012.04.006
  36. Seara-Paz, S., Gonzalez-Fonteboa, B., Martinez-Abella, F. and Eiras-Lopez, J. (2018), "Flexural performance of reinforced concrete beams made with recycled concrete coarse aggregate", Eng. Struct., 156(1), 32-45. https://doi.org/10.1016/j.engstruct.2017.11.015
  37. Silva, R.V., Brito, J. and Dhir R.K. (2015), "Tensile strength behaviour of recycled aggregate concrete", Constr. Build. Mater., 83(15), 108-118. https://doi.org/10.1016/j.conbuildmat.2015.03.034
  38. Sim, J. and Park, C. (2011), "Compressive strength and resistance to chloride ion penetration and carbonation of recycled aggregate concrete with varying amount of fly ash and fine recycled aggregate", Waste Manage., 31(11), 2352-2360. https://doi.org/10.1016/j.wasman.2011.06.014
  39. Tam, V.W.Y., Gao, X.F. and Tam, C.M. (2006), "Comparing performance of modified two-stage mixing approach for producing recycled aggregate concrete", Mag. Concrete Res., 58(7), 477-484. https://doi.org/10.1680/macr.2006.58.7.477
  40. Tsoumani, A., Matikas, T. and Barkoula, N. (2014), "Influence of recycled aggregates on compressive strength of concrete", Proceedings of the 2nd International Conference on Sustainable Solid Waste Management, Athens.
  41. Wambeke, B. and Shield, C. (2006), "Development length of glass fiber reinforced polymer bars in concrete", ACI Struct. J., 103(1), 11-17.
  42. World Commission on Environment and Development (1987), Our Common Future, United Nations World Commission on Environment and Development (WCED).
  43. Xiao, J., Li, J. and Zhang, C. (2005), "On statistical characteristics of the compressive strength of recycled aggregate concrete", Struct. Concrete, 6(4), 149-153. https://doi.org/10.1680/stco.2005.6.4.149
  44. Yang, I.H. and Jeong, J.Y. (2016), "Effect of recycled coarse aggregate on compressive strength and mechanical properties of concrete", J. Kor. Concrete Inst., 28(1), 105-113. https://doi.org/10.4334/JKCI.2016.28.1.105
  45. Zain, M.F.M., Mahmud, H.B., Ilham, A. and Faizal, M. (2002), "Prediction of splitting tensile strength of high-performance concrete", Cement Concrete Res., 32(8), 1251-1258. https://doi.org/10.1016/S0008-8846(02)00768-8

피인용 문헌

  1. Shear deformations based on variable angle truss model for concrete beams reinforced with FRP bars vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.337