DOI QR코드

DOI QR Code

5톤급 웜기어 감속기의 워엄기어와 케이싱의 최적설계 및 해석에 관한 연구

Study on Optimal Design and Analysis of Worm Gear and Casing of 5 Ton Class Worm Gear Reducer

  • 조성현 (경상대학교 대학원 기계항공공학부(항공연)) ;
  • 전창민 (경상대학교 대학원 기계항공공학부(항공연)) ;
  • 진진 (경상대학교 대학원 기계항공공학부(항공연)) ;
  • 김동선 (경상대학교 대학원 기계항공공학부(항공연)) ;
  • 류성기 (경상대학교 대학원 기계항공공학부(항공연))
  • Cho, Seong Hyun (School of Mechanical & Aerospace Engineering(ReCAPT), Gyeongsang National University) ;
  • Jeon, Chang Min (School of Mechanical & Aerospace Engineering(ReCAPT), Gyeongsang National University) ;
  • Qin, Zheon (School of Mechanical & Aerospace Engineering(ReCAPT), Gyeongsang National University) ;
  • Kim, Dongseon (School of Mechanical & Aerospace Engineering(ReCAPT), Gyeongsang National University) ;
  • Lyu, Sung-Ki (School of Mechanical & Aerospace Engineering(ReCAPT), Gyeongsang National University)
  • 투고 : 2019.09.07
  • 심사 : 2019.10.10
  • 발행 : 2019.12.31

초록

The worm reducer is capable of quadrature power transmission when the shafts are disposed at right angles to each other. Since a large reduction ratio can be obtained of up to approximately 1/100 and a sliding movement is performed during operation compared with other gears, the noise and vibration are small, and there is the advantage that reverse rotation can be prevented. On the other hand, severe wear and damage are displayed on the gear and worm tooth surface, and many defects, such as intense heat generation of the reducer, occur. In the reducer case, the four-piece casing method was selected to solve the problems of heat generation, transmission efficiency, and assemblability. In this paper, we analyzed the problems of the worm and worm wheel (the core parts of a 5-Ton worm reducer) and casing through these methods and researched how to solve them.

키워드

참고문헌

  1. Shi, W., Qin, D., and Xu, W., "Meshing Control of the Double Enveloping Hourglass Worm Gearing under the Conditions of Existing the Errors and the Load", Mechanism and Machine Theory, Vol. 39, No. 1, pp. 61-74, 2004. https://doi.org/10.1016/S0094-114X(03)00104-6
  2. Lee, S., Lee, D. H., Hwang, S. C. and Lee, K. H., "Stress Analysis of Helical Gear for a Railway Reducer", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 2, pp. 55-59, 2012.
  3. Cheon, K. Y., Han. D. Y., "Contact Finite Element Analysis of Anti-backlash Double-roller-Enveloping Hourglass Worm Gearing" Transactions of the Korean Society of Mechanical Engineers. A., Vol. 23, No. 7, pp. 1231-1237, 1999.
  4. An, I. H., Hur, N. S., Lee, I. B. and Lyu, S. K., "A Study on Effect of the Grinding in SCM420H Planetary Gear", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 5, pp. 54-59, 2012.
  5. Choi, B. R., Hwang, K. B., Bae, K. Y., "Analysis on Cutting Force of Tool in Gear Chamfering Process", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 1, pp. 52-62, 2013. https://doi.org/10.14775/ksmpe.2013.12.6.052
  6. Han, M. S., Chon, J., "Strength Durability on Spur and Helical Gears in the Gearbox of Machine Tool", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 3, pp. 103-110, 2014. https://doi.org/10.14775/ksmpe.2014.13.3.103
  7. Fang, H. S., Tsay, C. B., "Mathematical Model and Bearing Contacts of The ZK-type Worm Gear Set Cut by Oversize Hob Cutters", Mechanism and Machine Theory, Vol. 31, No. 3, pp. 271-282, 1996. https://doi.org/10.1016/0094-114X(95)00062-4
  8. An, I. H., Ahn, M. J., Xu. Z., Lyu. S. K., "A Study on the Effect of the Honing in SCM420H Planetary Gear," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 3, pp. 13-18, 2011.
  9. Han, M. S., Cho, J. U., “Strength Durability on Spur and Helical Gears in the Gearbox of Machine Tool,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 3, pp. 103-110, 2014. https://doi.org/10.14775/ksmpe.2014.13.3.103
  10. Yeh, T. J. and Wu, F. K., “Modeling and Robust Control of Worm-gear Driven Systems,” Simulation Modeling Practice and Theory, Vol. 17, No. 5, pp. 767-777, 2009. https://doi.org/10.1016/j.simpat.2009.01.002