DOI QR코드

DOI QR Code

호남고속철도 전차선로의 이상 상태 분석

Analysis for Catenary System with Focus on Abnomal Conditions on Honam High Speed Line

  • 전재근 (우송대학교 철도시스템학과) ;
  • 신승권 (한국철도기술연구원 스마트전기신호본부) ;
  • 정호성 (한국철도기술연구원 스마트전기신호본부) ;
  • 나경민 (한국철도기술연구원 스마트전기신호본부) ;
  • 박영 (한국철도기술연구원 스마트전기신호본부)
  • Jun, Jaegeun (Department of Railway System Engineering, Woosong University) ;
  • Shin, Seungkwon (Smart Electrical & Signaling Division, Korea Railroad Research Institute) ;
  • Jung, Hosung (Smart Electrical & Signaling Division, Korea Railroad Research Institute) ;
  • Na, Kyungmin (Smart Electrical & Signaling Division, Korea Railroad Research Institute) ;
  • Park, Young (Smart Electrical & Signaling Division, Korea Railroad Research Institute)
  • 투고 : 2018.09.28
  • 심사 : 2018.10.02
  • 발행 : 2019.01.01

초록

The overhead contact line (OCL) is a key piece of equipment for transmitting electrical energy to the pantograph of rail cars. Recently, a 400 km/h OCL was applied to the Honam high-speed line, and its performance was examined by running HEMU-430X. For the study, we analyzed the current of catenary wire concurrently while running HEMU-430X in the Honam high-speed line. Specifically, this study recorded the currents for each speed during operation of the railway vehicle. The analysis of the frequency of line current showed generation of third-harmonics, 15th-harmonics, 17th-harmonics, and 19th-harmonics. The current of catenary wire is a basic technology assessment used to determine the electrical safety of electric railway systems, and it can be used as a technology for analyzing circulating currents generated in the current configuration, as well as for analyzing electric fatigue of the OCL components.

키워드

JJJRCC_2019_v32n1_1_f0001.png 이미지

Fig. 1. Picture of current monitoring system, (a) installation of current monitoring system on OCL (overhead contact line) in Honam high-speed line and (b) program for analysis of current.

JJJRCC_2019_v32n1_1_f0002.png 이미지

Fig. 2. Infrastructure gauge of Honam high-speed line from Iksan to Jungub.

JJJRCC_2019_v32n1_1_f0003.png 이미지

Fig. 3. Results of current wave from between contact and catenary wire of HEMU-430X on Honam HSR, (a) 159 km/h, (b) 290 km/h, (c) 349 km/h, and (d) 370 km/h.

JJJRCC_2019_v32n1_1_f0004.png 이미지

Fig. 4. Results of current analysis of catenary system on Honam HSR line, (a) current wave and (b) frequency analysis.

Table. 1. Physical properties of overhead contact wire and catenary wire.

JJJRCC_2019_v32n1_1_t0001.png 이미지

참고문헌

  1. Y. S. Park, K. M. Na, and Y. Park, Trans. Korean. Inst. Elect. Eng., 67, 976 (2018). [DOI: https://doi.org/10.5370/KIEE.2018.67.7.976]
  2. Y. Park, K. Lee, S. Y. Park, J. Y. Park, and W. S. Choi, Trans. Korean. Inst. Elect. Eng., 64, 1406 (2015). [DOI: https://doi.org/10.5370/KIEE.2015.64.9.1406]
  3. Y. H. Cho, K. Lee, S. Y. Kwon, and H. R. Cho, Trans. Korean. Inst. Elect. Eng., 64, 1789 (2015). [DOI: https://doi.org/10.5370/KIEE.2015.64.12.1789]
  4. Y. Park, S. K. Shin, K. Lee, J. Kim, and W. Kim, Trans. Korean. Inst. Elect. Eng., 62, 573 (2013). [DOI: https://doi.org/10.5370/KIEE.2013.62.4.573]
  5. Y. Park, Y. H. Cho, K. W. Lee, H. J. Kim, and I. C. Kim, J. Korean Inst. Electr. Electron. Mater. Eng., 22, 864 (2009). [DOI: https://doi.org/10.4313/JKEM.2009.22.10.864]
  6. J. H. Kim, J. G. Lee, K. S. Lee, W. Rhee, and H. B. Lee, Trans. Korean. Inst. Elect. Eng., 62, 6 (2013). [DOI: https://doi.org/10.5370/KIEEP.2013.62.1.006]
  7. Y. Park, H. Jung, and K. Lee, Trans. Korean. Inst. Elect. Eng., 62, 1465 (2013). [DOI: https://doi.org/10.5370/KIEE.2013.62.10.1465]