Fig. 1. Mesh generation of 100A valve
Fig. 2. Total deformation(50bar)
Fig. 3. Strain(50bar)
Fig. 4. Stress(50bar)
Fig. 5. Total deformation(100bar)
Fig. 6. Strain(100bar)
Fig. 7. Stress(100bar)
Fig. 8. Total deformation(150bar)
Fig. 9. Strain(150bar)
Fig. 10. Stress(150bar)
Fig. 11. Mesh generation of 200A valve
Fig. 12. Total deformation(50bar)
Fig. 13. Strain(50bar)
Fig. 14. Stress(50bar)
Fig. 15. Total deformation(100bar)
Fig. 16. Strain(100bar)
Fig. 17. Stress(100bar)
Fig. 18. Total deformation(150bar)
Fig. 19. Strain(150bar)
Fig. 20. Stress(150bar)
Table 1. Definition of KSD 3562
Table 2. Analysis results(100A)
Table 3. Analysis results(200A)
Table 4. Safety check results(100A)
Table 5. Safety check results(200A)
References
- Solid Works User's Manual Revision 3.0. (2006). SolidWorks Co.
- C. W. Park & C. H. Hong. (2008). "User Guide of ANSYS Workbench", Intervision.
- ANSYS User's Manual Ver.12.1. (2010). ANSYS Inc.
- S. C. Han & B. G. Lee. (2018). A Study on the Convergence Contract Behavior of Friction Heat and Pad on Disk Brake, Journal of the korea Convergence Society, 9(1), 291-301. https://doi.org/10.15207/JKCS.2018.9.1.291
- G. W. Hwang & J. U. Cho. (2017). Convergence Study on Durability Improvement due to Radius on Arch Type at CFRP Structure with Stacking Angle, Journal of the Korea Convergence Society, 8(7), 219-224. https://doi.org/10.15207/JKCS.2017.8.4.219
- James shakelford & William Alexander. (1994). "Material Science and Engineering Hand Book", CRC Press.
- J. S. Lee. (2013). Structural Analysis of High Pressure Cleaning Machine, Journal of the Korea Academia-Industrial cooperation Society, 14(10), 4694-4699. https://doi.org/10.5762/KAIS.2013.14.10.4694
- S. C. Park. (2014). Quality Evaluations of Induction Motors Bracket Castings during Fabrication Processes, Journal of the Korea Academia-Industrial cooperation Society, 15(9), 5474-5479. https://doi.org/10.5762/KAIS.2014.15.9.5474
- J. S. Lee. (2014). FEM Analysis of High Pressure Cleaning Machine, Journal of the Korea Academia-Industrial cooperation Society, 15(10), 5950-5954. https://doi.org/10.5762/KAIS.2014.15.10.5950
- J. H. Lee & J. U. Cho. (2015). Convergence Technique Study through Simulation Thermal Analysis due to the Shape of Electric Heater, Journal of the Korea convergence Society, 6(6), 241-246. https://doi.org/10.15207/JKCS.2015.6.6.241
- J. R. Kim. (2016). Development of High Efficiency Dehumidifiers in low temperature, Journal of the Korea Academia-Industrial cooperation Society, 17(9), 206-211. https://doi.org/10.5762/KAIS.2016.17.9.206
- W. Y. Kim & S. G. Kim. (2017). The Design and Implementation of an Emergency Video call Integrated Management System based on VoIP, Journal of the Korea convergence Society, 8(12), 93-99. https://doi.org/10.15207/JKCS.2017.8.12.093
- N. H. Kim & J. H. Byeon & K.H.Lee. (2017). Shape Optimization of Ball Valve for High Temperature, Journal of the Korea Academia-Industrial cooperation Society, 18(1), 15-20. https://doi.org/10.5762/KAIS.2017.18.1.15
- B. J. Kim & S. B. Lee(2017). Study on the Shaping Process of Turbocharger Nozzle Slide Joint, Journal of the Korea Academia-Industrial cooperation Society, 18(1), 107-114. https://doi.org/10.5762/KAIS.2017.18.1.107
- J. S. Lee. (2012). Design and Computational Fluid Dynamics of Pressure Reducing Valve, Journal of the Korea Academia-Industrial cooperation Society, 13(7), 2853-2857. https://doi.org/10.5762/KAIS.2012.13.7.2853