References
- M. Gell, E. Jordan, K. Vaidyanathan, K. McCarron, B. Barber, Y. H. Sohn, and V. K. Tolpygo, "Bond Strength, Bond Stress and Spallation Mechanisms of Thermal Barrier Coatings," Surf. Coat. Technol., 120 53-60 (1999).
- R. A. Miller, "Current Status of Thermal Barrier Coatings- an Overview," Surf. Coat. Technol., 30 [1] 1-11 (1987). https://doi.org/10.1016/0257-8972(87)90003-X
- S. M. Meier and D. K. Gupta, "The Evolution of Thermal Barrier Coatings in Gas Turbine Engine Applications," J. Eng. Gas Turbines Power, 116 [1] 250-57 (1994). https://doi.org/10.1115/1.2906801
- D. R. Clarke and C. G. Levi, "Materials Design for the Next Generation Thermal Barrier Coatings," Annu. Rev. Mater. Res., 33 [1] 383-417 (2003). https://doi.org/10.1146/annurev.matsci.33.011403.113718
- R. A Miller, "Thermal Barrier Coatings for Aircraft Engines: History and Directions," J. Therm. Spray Technol., 6 [1] 35 (1997). https://doi.org/10.1007/BF02646310
- S. Bose and J. DeMasi-Marcin, "Thermal Barrier Coating Experience in Gas Turbine Engines at Pratt & Whitney," J. Therm. Spray Technol., 6 [1] 99-104 (1997). https://doi.org/10.1007/BF02646318
- R. L. Jones, Metallurgical and Ceramic Protective Coatings; pp. 194-235, Chapman and Hall, London, 1996.
- X. Q. Cao, R. Vassen, and D. Stoever, "Ceramic Materials for Thermal Barrier Coatings," J. Eur. Ceram. Soc., 24 [1] 1-10 (2004). https://doi.org/10.1016/S0955-2219(03)00129-8
- S. Paul, A. Cipitria, S. A. Tsipas, and T. W. Clyne, "Sintering Characteristics of Plasma Sprayed Zirconia Coatings Containing Different Stabilisers," Surf. Coat. Technol., 203 [8] 1069-74 (2009). https://doi.org/10.1016/j.surfcoat.2008.09.037
- A. G. Evans, D. R. Mumm, J. W. Hutchinson, G. H. Meier, and F. S. Pettit, "Mechanisms Controlling the Durability of Thermal Barrier Coatings," Prog. Mater. Sci., 46 [5] 505-53 (2001). https://doi.org/10.1016/S0079-6425(00)00020-7
- D. R. Clarke, M. Oechsner, and N. P. Padture, "Thermal- Barrier Coatings for more Efficient Gas-Turbine Engines," MRS Bull., 37 [10] 891-98 (2012). https://doi.org/10.1557/mrs.2012.232
-
M. N. Rahaman, J. R. Gross, R. E. Dutton, and H. Wang, "Phase Stability, Sintering, and Thermal Conductivity of Plasma-Sprayed
$ZrO_2$ -$Gd_2O_3$ Compositions for Potential Thermal Barrier Coating Applications," Acta Mater., 54 [6] 1615-21 (2006). https://doi.org/10.1016/j.actamat.2005.11.033 - E. Bakan, D. E. Mack, G. Mauer, and R. Vassen, "Gadolinium Zirconate/YSZ Thermal Barrier Coatings: Plasma Spraying, Microstructure, and Thermal Cycling Behavior," J. Am. Ceram. Soc., 97 [12] 4045-51 (2014). https://doi.org/10.1111/jace.13204
- R. Vassen, X. Cao, F. Tietz, D. Basu, and D. Stover, "Zirconates as New Materials for Thermal Barrier Coatings," J. Am. Ceram. Soc., 83 [8] 2023-28 (2000). https://doi.org/10.1111/j.1151-2916.2000.tb01506.x
- T. A. Taylor, "Low Thermal Expansion Bondcoats for Thermal Barrier Coatings"; U S Patent 7,910,225 (March 22, 2011).
- G. Dwivedi, V. Viswanathan, S. Sampath, A. Shyam, and E. Lara-Curzio, "Fracture Toughness of Plasma-Sprayed Thermal Barrier Ceramics: Influence of Processing, Microstructure, and Thermal Aging," J. Am. Ceram. Soc., 9 [9] 2736-44 (2014).
- R. Harnacha, P. Fauchais, and F. Nardou, "Influence of Dopant on the Thermal Properties of Two Plasma- Sprayed Zirconia Coatings Part I: Relationship between Powder Characteristics and Coating Properties," J. Therm. Spray Technol., 5 [4] 431 (1996). https://doi.org/10.1007/BF02645273
- S. Stemmer, J. Vleugels, and O. V. D. Biest, "Grain Boundary Segregation in High-Purity, Yttria-Stabilized Tetragonal Zirconia Polycrystals (Y-TZP)," J. Eur. Ceram. Soc., 18 [11] 1565-70 (1998). https://doi.org/10.1016/S0955-2219(98)00078-8
- K. Y. Park, Y. G. Jung, I. S. Kim, and B. I. Yang, "Effects of Purity and Phase Content of Feedstock Powder on Thermal Durability of Zirconia-Based Thermal Barrier Coatings," J. Therm. Spray Technol., 26 [6] 1161-67 (2017). https://doi.org/10.1007/s11666-017-0571-4
- J. Wang, H. P. Li, and R. Stevens, "Hafnia and Hafnia-Toughened Ceramics," J. Mater. Sci., 27 [20] 5397-430 (1992). https://doi.org/10.1007/BF00541601
- J. L. Smialek, "Compiled Furnace Cyclic Lives of EB-PVD Thermal Barrier Coatings," Surf. Coat. Technol., 276 31-8 (2015). https://doi.org/10.1016/j.surfcoat.2015.06.018
-
C. Wang, Y. Wang, S. Fan, Y. You, L. Wang, C. Yang, X. Sun, and X. Li, "Optimized Functionally Graded
$La_2Zr_2O_7$ /8YSZ Thermal Barrier Coatings Fabricated by Suspension Plasma spraying," J. Alloys Compd., 649 1182-90 (2015). https://doi.org/10.1016/j.jallcom.2015.05.290 - D. Song, U. Paik, X. Guo, J. Zhang, T. K. Woo, Z. Lu, S. H. Jung, J. H Lee, and Y. G. Jung, "Microstructure Design for Blended Feedstock and its Thermal Durability in Lanthanum Zirconate Based Thermal Barrier Coatings," Surf. Coat. Technol., 308 40-9 (2016). https://doi.org/10.1016/j.surfcoat.2016.07.112
- F. Andreola, C. Leonelli, and M. Romagnoli, "Techniques Used to Determine Porosity," Am. Ceram. Soc. Bull., 79 [7] 49-52 (2000).
- S. Deshpande, A. Kulkarni, S. Sampath, and H. Herman, "Application of Image Analysis for Characterization of Porosity in Thermal Spray Coatings and Correlation with Small Angle Neutron Scattering," Surf. Coat. Technol., 187 [1] 6-16 (2004). https://doi.org/10.1016/j.surfcoat.2004.01.032
- W. R. Chen, X. Wu, B. R. Marple, and P. C. Patnaik, "Oxidation and Crack Nucleation/Growth in an Air-Plasma-Sprayed Thermal Barrier Coating with NiCrAlY Bond Coat," Surf. Coat. Technol., 197 109-15 (2005). https://doi.org/10.1016/j.surfcoat.2004.06.027
- D. Zhu and A. M. Robert, "Thermal Conductivity and Elastic Modulus Evolution of Thermal Barrier Coatings under High Heat Flux Conditions," J. Therm. Spray Technol., 9 [2] 175-80 (2000). https://doi.org/10.1361/105996300770349890
-
G. Thurn, G. A. Schneider, H. A. Bahr, and F. Aldinger, "Toughness Anisotropy and Damage Behavior of Plasma Sprayed
$ZrO_2$ Thermal Barrier Coatings," Surf. Coat. Technol., 123 [2-3] 147-58 (2000). https://doi.org/10.1016/S0257-8972(99)00528-9 - M. K. Gupta and P. Nylen, "A Modelling Approach to Design of Microstructures in Thermal Barrier Coatings," J. Ceram. Sci. Technol., 4 [2] 85-92 (2013).
- N. P. Padture, M. Gell, and E. H. Jordan, "Thermal Barrier Coatings for Gas-Turbine Engine Applications," Science, 296 [5566] 280-84 (2002). https://doi.org/10.1126/science.1068609
- A. V. Put, D. Oquab, E. Pere, A. Raffaitin, and D. Monceau, "Beneficial Effect of Pt and of Pre-Oxidation on the Oxidation Behaviour of an NiCoCrAlYTa Bond-Coating for Thermal Barrier Coating Systems," Oxid. Met., 75 [5-6] 247-79 (2011). https://doi.org/10.1007/s11085-011-9241-y
- Y. Li, C. J. Li, Q. Zhang, L. K. Xing, and G. J. Yang, "Effect of Chemical Compositions and Surface Morphologies of MCrAlY Coating on its Isothermal Oxidation Behavior," J. Therm. Spray Technol., 20 [1-2] 121-31 (2011). https://doi.org/10.1007/s11666-010-9590-0
- A. Gil, V. Shemet, R. Vassen, M. Subanovic, J. Toscano, D. Naumenko, L. Singheiser, and W. J. Quadakkers, "Effect of Surface Condition on the Oxidation Behaviour of MCrAlY Coatings," Surf. Coat. Technol., 201 [7] 3824-28 (2006). https://doi.org/10.1016/j.surfcoat.2006.07.252
- O. Trunova, T. Beck, R. Herzog, R. W. Steinbrech, and L. Singheiser, "Damage Mechanisms and Lifetime Behavior of Plasma Sprayed Thermal Barrier Coating Systems for Gas Turbines-Part I: Experiments," Surf. Coat. Technol., 202 [20] 5027-32 (2008). https://doi.org/10.1016/j.surfcoat.2008.05.006
- R. Stevens, An Introduction to Zirconia; p. 7, Magnesium Elektron Limited, Twickenham, 1983.
Cited by
- Crack-Resistance Behavior of an Encapsulated, Healing Agent Embedded Buffer Layer on Self-Healing Thermal Barrier Coatings vol.9, pp.6, 2018, https://doi.org/10.3390/coatings9060358
- 경사화 두께를 갖는 열차폐 코팅의 열적 내구성 평가 vol.21, pp.8, 2020, https://doi.org/10.5762/kais.2020.21.8.248