Korean Journal of Construction Engineering and Management (한국건설관리학회논문집)

Korea Institute of Construction Engineering and Management (한국건설관리학회)
권호 표지
DOI QR코드

DOI QR Code

Development of A Prototype for Wall Formwork Designs using Open BIM

개방형 BIM을 활용한 벽체 거푸집설계 프로토타입 개발

  • Jin, Chengquan (Department of Architectural Engineering, University of Seoul) ;
  • Kim, Hyunjoo (Department of Global Construction, University of Seoul) ;
  • Hyun, Chang-Taek (Department of Architectural Engineering, University of Seoul) ;
  • Han, Sang-Won (Department of Architectural Engineering, University of Seoul)
  • Received : 2018.01.22
  • Accepted : 2018.07.03
  • Published : 2018.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

The formwork cost amounts for a significant proportion of project construction costs. It costs 10-15% of the total construction cost and 30-40% of the frame structure construction cost. In addition, the formwork collapse accidents are frequently causing deaths in the construction industry, and thus, is known to be of relatively high degree of risk. As so, the accuracy of structural calculation and quantity take-off when planning the formwork in a construction project are a very important matter. Accordingly, this study develops a BIM based formwork design prototype, that enables the construction manager to optimize the design through applying the proposed new IFC entities associated with the formwork design. The approach proposed in this study is expected to support the construction manager with accurate quantity calculation and rapid planning and construction. Since this study considered specific small-scale buildings using Euro-form and show the possibility of utilizing BIM entities in the formwork design process, further research is recommended towards the limitations in applying the system to other types of formworks.

거푸집공사비는 건축공사비의 10~15%, 골조공사비의 30~40%로, 건축공사에서 차지하는 비중이 상당하다. 또한 거푸집 붕괴로 인한 사망재해가 빈번하게 발생하고 있어, 다른 공종에 비하여 상대적으로 재해강도가 높은 공종이라 할 수 있다. 이처럼 건설 프로젝트에서 거푸집을 설계할 때 정확한 물량산출과 구조계산은 매우 중요한 사항이다. 따라서 본 연구에서는 거푸집설계를 용이하게 하기 위하여 거푸집공사에 관련된 새로운 IFC Entity를 제안하였으며, "개방형 BIM 거푸집설계 프로토타입"을 개발하였다. 본 연구에서 제안하는 거푸집설계 접근법은 시공 관리자로 하여금 정확한 물량산출과 신속한 계획 및 시공을 수행하는데 도움을 줄 것으로 기대된다. 하지만 본 연구는 소규모 특정건축물과 유로폼 만을 대상으로 수행하였기 때문에, 그 외의 건축물의 거푸집공사에 적용하기에는 한계가 있고, 범용적으로 거푸집공사에 적용하기 위해서는 추가적인 연구가 필요할 것이다.

Keywords

References

  1. buildingSMART, http://www.buildingsmart-tech.org/ifc/
  2. Chung, B. Y., Lee, H. C., Kim, J. H., and Go, S. S. (2010). "Performance Evaluation of Recycled Synthetic Resins Euro-form by Injection Modeling Method." Journal of the Korea Institute of Building Construction, 10(2), pp. 105-113. https://doi.org/10.5345/JKIC.2010.10.2.105
  3. Hanna, Awad S., Willenbrock, Jack H., and Sanvido, Victor E. (1992). "Knowledge acquisition and development for formwork selection system." Journal of Construction Engineering and Management, 118(1), pp. 179-198. https://doi.org/10.1061/(ASCE)0733-9364(1992)118:1(179)
  4. Hwang, Y. S. (2004). "Automatic Quantity Takeoff from CAD File Based on IFC Model." Architectural Institute of Korea Annual Conference, 24(1), pp. 798-801.
  5. Joo, S. I., and Jun, H. J. (2009). "A Study on the BIM-basd Material Take Off That is Usable as 4D Simulation." Architectural Institute of Korea Annual Conference, 29(1), pp. 335-338.
  6. Jun, K. H., and Yoon, S. H. (2010). "Using hand and 3D CAD compared with concrete and mold Quantity." The Korean Institute of Building Construction, 10(2), pp. 45-48. https://doi.org/10.5345/JKIC.2010.10.5.045
  7. Jun, K. H., and Yoon, S. H. (2011). "The case study of BIM-based quantity take-off for concrete and formwork." Journal of KIBIM, 1(1), pp. 13-17. https://doi.org/10.13161/kibim.2011.1.1.013
  8. Jung, Y. S., Park, J. H., Kang, S. H., Park, B. M., and Choi, I. S. (2005). "Factors for Selecting Forms; A Case-Study." The Korean Institute of Building Construction, 5(2), pp. 111-116. https://doi.org/10.5345/JKIC.2005.5.1.111
  9. Kannan, M. Ramesh and Santhi, M. Helen (2013). "Constructability Assessment of Climbing Formwork Systems Using Building Information Modeling." Procedia Engineering, 64, pp. 1129-1138. https://doi.org/10.1016/j.proeng.2013.09.191
  10. Kim, Hyunjoo et al. (2016). "BIM IFC information mapping to building energy analysis (BEA) model with manually extended material information." Automation in Construction, 68, pp. 183-193. https://doi.org/10.1016/j.autcon.2016.04.002
  11. Kim, J. H., and Yoon, S. W. (2013). "A Verification of the Accuracy in BIM-Based Quantity Taking-Off- Focusing on Finishing Work." Journal of KIBIM, 3(2), pp. 1-9. https://doi.org/10.13161/kibim.2013.3.2.001
  12. Kim, K. R., and Yu, J. H. (2012). "A Method for Extracting Geometry Data from IFC File for Building Energy Load Analysis." Journal of the Architectural Institute of Korea, 28(5), pp. 241-248.
  13. Kim, S. G., and Lee, U. K., Cho, H. H., Kang, K. I. (2006). "Decision Support System for Slab Form-work Selection of High-rise Building Construction." Journal of the Architectural Institute of Korea, 22(11), pp. 207-214.
  14. Korea Land & Housing Corporation (2008). Apartment formwork guide.
  15. Kunwon Engineering Technology Division (2010). Building Information Modeling source book, Kunwon Engineering.
  16. Lee, J. J., Shin, T. H., Kim, S. A., Kang, M. K., and Chin, S. Y. (2008). "A System Development of Quantity Data Type Analysis for BIM based Automation of Estimation Framework." KICEM Annual conference, pp. 747-750.
  17. Lee, J. G., Lee, H. S., Park, M. S., and Jung, M. H. (2013). "A Framework Integrating Cost and Schedule based on BIM using IFC." Korean Journal of Construction Engineering and Management, KICEM, 14(3), pp. 53-64. https://doi.org/10.6106/KJCEM.2013.14.3.053
  18. Lee, K. S., Kim, S. M., Kim, Y. S., and Han, S. W. (2010). "Evaluation of Requisites for Finding Appropriate Form-work Operation in Residential Building using Delphi Technigue." The Korean Institute of Building Construction, 10(2), pp. 149-152.
  19. Ministry of Land, Infrastructure and Transport (2014). Hypothesis construction standard specification.
  20. Oh, S. W., Sung, B. J., Kim, Y. S., and Kim, J. R. (2001). "The Development of an Automated Cost Estimating System using 3D CAD Building Element Information - Focused on the Apartment Housing." Journal of the Architectural Institute of Korea, 17(6), pp. 103-112.
  21. Park, J. D., and Kim, J. W. (2009). "A Study on the Ontology Representation of the IFC based Building Information Model." Journal of the Architectural Institute of Korea, 25(5), pp. 87-94.
  22. Park, S. J., Song, H. H., Kim, D. Y., and Shim, C. S. (2014). "Concrete Formwork Design for Irregular Structures using 3D Printing." KIBIM Annual Conference, 4(1), pp. 89-90.
  23. Public Procurement Service (2015), BIM Application Guide
  24. Seo, G. S., Kim, D. H., Kum, D. S., and Jeong, H. Y. (2004). "Examples of form specification and structure calculations." Journal of the Korean Structural Engineers Association, 11(4), pp. 14-23.
  25. Shin, Y. S., Choi, H. B., Lee, U. K., Ann, S. H., and Kang, K. I. (2006). "A Study on Selection of Slab Form Work System for High - rise Building Construction." Journal of the Architectural Institute of Korea, 22(2), pp. 147-154.
  26. SMART SCAFFOLDER, https://smartscaffolder.com/news/ bim-toolbox-robust-ifc-export/
  27. Song, C. Y., Lee, H. C., Park, S. H., Cho, K. M., and Hyun, C. T. (2010). "Productivity Analysis of Structural Work for Apartment Building Using AL-Form." Journal of the Architectural Institute of Korea, 26(4), pp. 113-121.
  28. Tam, C. M., Tong, Thomas K. L., Lau Tony C. T., and Chan K. K. (2005). "Selection of vertical formwork system by probabilistic neural networks models." Construction Management and Economics, 23, pp. 245-254.
  29. Yoon, S. M., Woo, S. J., Choi, J. W., and Kim, J. H. (2013). "A Method of Converting IFC Data for Development of BIM based Building Energy Simulation Interface." the Korean Solar Energy Society Spring Annual Conference, 33(1), pp. 182-187.