International Journal of Naval Architecture and Ocean Engineering

  • 제10권6호
  • /
  • Pages.711-729
  • /
  • 2018
  • /
  • 2092-6782(pISSN)
  • /
  • 2092-6790(eISSN)
대한조선학회 (The Society of Naval Architects of Korea)
권호 표지
DOI QR코드

DOI QR Code

Experimental investigations on the failure modes of ring-stiffened cylinders under external hydrostatic pressure

  • 투고 : 2017.09.14
  • 심사 : 2017.12.10
  • 발행 : 2018.11.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper reports on the experimental investigations on the failure modes of ring-stiffened cylinder models subjected to external hydrostatic pressure. Nine models were welded from general structural steel. The shells were initially formed by cold-rolling, and flat-bar ring frames were welded to the shell. The hydrostatic pressure tests were conducted by using water as the medium in pressure chambers. The details of the preparation and main test were briefly explained. The investigation identified the consequence of the structural failure modes, including: shell yielding, local shell buckling between ring stiffeners, overall buckling of the shell together with the stiffeners, and interactive buckling mode combining local and overall buckling. In addition, the ultimate strengths were predicted by using existing design codes. Non-linear numerical computations were also conducted by employing the actual imperfection coordinates. Finally, accuracy and reliability of the predictions of design formulae and numerical were substantiated with the test results.

키워드

참고문헌

  1. ABS, 2002. Rules for Building and Classing Underwater Vehicles, Systems and Hyperbaric Facilities. American Bureau of Shipping, USA.
  2. API, 2000. Bulletin 2U - Bulletin on Stability Design of Cylindrical Shells. American Petroleum Institute, USA.
  3. Bryant, A.R., 1954. Hydrostatic Pressure Buckling of a Ring-stiffened Tube. Naval Construction Research Establishment (NCRE) Report No.306.
  4. BSI, 2009. PD 5500: Specification for Unfired Fusion Welded Pressure Vessels. British Standard Institution, United Kingdom.
  5. Cerik, B.C., 2015. Ultimate strength of locally damaged steel stiffened cylinders under axial compression. Thin-Walled Struct. 95, 138-151. https://doi.org/10.1016/j.tws.2015.07.004
  6. Cerik, B.C., Cho, S.R., 2013. Numerical investigation on the ultimate strength of stiffened cylindrical shells considering residual stresses and shakedown. J. Mar. Sci. Technol. 18, 524-534. https://doi.org/10.1007/s00773-013-0224-3
  7. Cerik, B.C., Shin, H.K., Cho, S.R., 2013. Probabilistic ultimate strength analysis of submarine pressure hulls. Int. J. Naval Arch. Ocean Eng. 5, 101-115. https://doi.org/10.2478/IJNAOE-2013-0120
  8. Cerik, B.C., Shin, H.K., Cho, S.R., 2015. On the resistance of steel ring-stiffened cylinders subjected to low-velocity mass impact. Int. J. Impact Eng. 84, 108-123. https://doi.org/10.1016/j.ijimpeng.2015.04.011
  9. Cho, S.R., Do, Q.T., Shin, H.K., 2017. Residual strength of damaged ring-stiffened cylinders subjected to external hydrostatic pressure. Mar. Struct. 56, 186-205. https://doi.org/10.1016/j.marstruc.2017.08.005
  10. DNV-GL, 2015. Rules for Classification Naval Vessel. Part 4 Sub-surface Ships Chapter 1 Submarines. DNV GL AS.
  11. Faulkner, D., 1977. Effects of residual stresses on the ductile strength of plane welded grillages and of ring stiffened cylinders. J. Strain Anal. 12, 130-139. https://doi.org/10.1243/03093247V122130
  12. Faulkner, D., 1991. Application of Reliability Theory in Submarine Design. Advances in Marine Structures 2. Elsevier Applied Science, New York, pp. 566-585.
  13. Frieze, P.A., 1994. The Experimental response of flat-bar stiffeners in cylinders under external pressure. Mar. Struct. 7, 213-230. https://doi.org/10.1016/0951-8339(94)90025-6
  14. Graham, D., 2007. Predicting the collapse of externally pressurized ring-stiffened cylinders using finite element analysis. Mar. Struct. 20, 202-217. https://doi.org/10.1016/j.marstruc.2007.09.002
  15. Hibbit, D., Karlsson, B., Sorensen, P., 2000. ABAQUS User's Manual, USA.
  16. Hodge, P.G., 1954. The rigid-plastic analysis of symmetrically loaded cylindrical shells. J. Appl. Mech. Trans. ASME 21, 336-342.
  17. ISSC, 2012. Committee V.5 naval vessels. In: Proc. 18th International Ship and Offshore Structure Congress.
  18. ISSC, 2015. Committee III.1 ultimate strength. In: Proc. 19th International Ship and Offshore Structure Congress.
  19. Kendrick, S.B., 1955. Analysis of Results of Static Pressure Tests of Chatham Submarine Models. Naval Construction Research Establishment (NCRE), Report No. R.218.
  20. Kendrick, S.B., 1964. Structural Design of Submarine Pressure Vessels. Naval Construction Research Establishment (NCRE), Report No. R.483.
  21. Kendrick, S.B., 1970. Externally pressurized vessels. In: Gill, S.S. (Ed.), The Stress Analysis of Pressure Vessels and Pressure Vessel Components. Pergamon Press, Toronto, pp. 405-511.
  22. Kendrick, S.B., 1977. Shape imperfection in cylinders and spheres: their importance in design and methods of measurement. J. Strain Anal. 117-122.
  23. Kirstein, A.F., Slankard, R.C., 1956. An Experimental Investigation of the Shellinstability Strength of a Machined, Ring-stiffened Cylindrical Shell under Hydrostatic Pressure (Model BR-4A). David Taylor Model Basin. DTMB Report No. 997.
  24. Lunchick, M.E., 1959. Yield Failure of Stiffened Cylinders under Hydrostatic Pressure. David Taylor Model Basin. DTMB Report 1291.
  25. MacKay, J.R., Jiang, L., Glas, A.H., 2011a. Accuracy of nonlinear finite element collapse predictions for submarine pressure hulls with and without artificial corrosion damage. Mar. Struct. 24, 292-317. https://doi.org/10.1016/j.marstruc.2011.04.001
  26. MacKay, John, 2007. Structural Analysis and Design of Pressure Hulls: the State of the Art and Future Trends. Technical Memorandum DRDC Atlantic TM 2007-188.
  27. MacKay, J.R., van Keulen, F., 2010. A review of external pressure testing techniques for shells including a novel volume-control method. Exp. Mech. 50, 753-772. https://doi.org/10.1007/s11340-009-9272-3
  28. MacKay, J.R., Van Keulen, F., 2013. Partial safety factor approach to the design of submarine pressure hulls using nonlinear finite element analysis. Finite Elem. Anal. Des. 65, 1-16. https://doi.org/10.1016/j.finel.2012.10.009
  29. MacKay, J.R., Van Keulen, F., Smith, M.J., 2011b. Quantifying the accuracy of numerical collapse predictions for the design of submarine pressure hulls. Thin-Walled Struct. 49, 145-156. https://doi.org/10.1016/j.tws.2010.08.015
  30. Miller, C.D., Kinra, R.K., 1981. External pressure tests of ring-stiffened fabricated steel cylinders. J. Petrol. Technol. 33, 2528-2538. https://doi.org/10.2118/10641-PA
  31. Reynolds, T.E., 1960. Inelastic Lobar Buckling of Cylindrical Shells under External Hydrostatic Pressure. David Taylor Model Basin. DTMB Report 1392.
  32. Ross, C.T.F., 1990. Pressure Vessels under External Pressure: Statics and Dynamics. Elsevier Science Publishing Co. Inc., New York.
  33. Salerno, V.L., Pulos, J.G., 1952. Stress Distribution in a Circular Cylindrical Shell under Hydrostatic Pressure Supported by Equally Spaced Circular Ring Frames. Polytechnic Institute of Brooklyn Aeronautical Laboratory Report No.210.
  34. Slankard, R.C., Nash, W.A., 1953. Tests of the Elastic Stability of a Ring-stiffened Cylindrical Shell, Model BR-5 (${\lambda}$= 1.705), Subjected to Hydrostatic Pressure. David Taylor Model Basin. DTMB Report No. 822.
  35. Tokugawa, T., 1929. Model experiments on the elastic stability of closed and cross-stiffened circular cylinders under uniform external pressure. In: Proc. World Engineering Congress, Tokyo, vol. 29.
  36. von Mises, R., 1929. The Critical External Pressure of Cylindrical Tubes under Uniform Radial and Axial Load, Translated by D. F. Windenburg, In:Stodolas Festschr, pp. 418-430.
  37. von Sanden, K., Gunther, K., 1952. The Strength of Cylindrical Shell, Stiffened by Frames and Bulkhead, under Uniform External Pressure on All Sides. David Taylor Model Basin. DTMB Report Translation No.38.
  38. Windenburg, D.F., Trilling, C., 1934. Collapse by Instability of Thin Cylindrical Shells under External Pressure. David Taylor Model Basin DTMB Report No. 385.
  39. Yamamoto, Y., Homma, Y., Oshima, K., Mishiro, Y., Terada, H., Yoshikawa, T., Morihana, H., Yamauchi, Y., Takenaka, M., 1989. General instability of ring-stiffened cylindrical shells under external pressure. Mar. Struct. 2, 133-149. https://doi.org/10.1016/0951-8339(89)90009-9

피인용 문헌

  1. Investigation of the Dynamic Buckling of Spherical Shell Structures Due to Subsea Collisions vol.8, pp.7, 2018, https://doi.org/10.3390/app8071148
  2. Numerical studies of the failure modes of ring-stiffened cylinders under hydrostatic pressure vol.70, pp.4, 2018, https://doi.org/10.12989/sem.2019.70.4.431
  3. A New Formulation for Predicting the Collision Damage of Steel Stiffened Cylinders Subjected to Dynamic Lateral Mass Impact vol.10, pp.11, 2018, https://doi.org/10.3390/app10113856
  4. Buckling Analysis of an AUV Pressure Vessel with Sliding Stiffeners vol.8, pp.7, 2018, https://doi.org/10.3390/jmse8070515
  5. Buckling Properties of a Subsea Function Chamber for Oil/Gas Processing in Deep Waters vol.19, pp.4, 2018, https://doi.org/10.1007/s11804-020-00189-5
  6. Implosion tests of aluminium-alloy ring-stiffened cylinders subjected to external hydrostatic pressure vol.78, pp.None, 2021, https://doi.org/10.1016/j.marstruc.2021.102980