Journal of the korean academy of Pediatric Dentistry (대한소아치과학회지)

Korean Academy of Pediatric Dentistry (대한소아치과학회)
권호 표지
DOI QR코드

DOI QR Code

Correlation between Fluoride Release, Microhardness and Solubility of High viscosity Glass Ionomers

고점도 글라스아이오노머의 불소 유리량, 미세경도 및 용해도의 상관관계

  • Shin, Bisol (Department of Pediatric Dentistry, School of Dentistry, Dankook University) ;
  • Kim, Jongsoo (Department of Pediatric Dentistry, School of Dentistry, Dankook University) ;
  • Yoo, Seunghoon (Department of Pediatric Dentistry, School of Dentistry, Dankook University)
  • 신비솔 (단국대학교 치의학과 소아치과학교실) ;
  • 김종수 (단국대학교 치의학과 소아치과학교실) ;
  • 유승훈 (단국대학교 치의학과 소아치과학교실)
  • Received : 2018.06.14
  • Accepted : 2018.07.03
  • Published : 2018.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study was to measure and compare the amount of fluoride, microhardness and solubility of high viscosity glass ionomer and resin-reinforced glass ionomer during 84 days. Fuji IX GP EXTRA, Fuji IX GP, Fuji II LC and Filtek$^{TM}$ Z350XT stored in deionized water for 84 days to measure fluoride release, microhardness and solubility. As a result of measurement of fluoride release, all the glass ionomers showed the highest amount of fluoride release on day 1 and gradually decreased. Fuji IX GP EXTRA showed the highest amount of fluoride release and cumulative release. And Fuji IX GP and Fuji II LC showed no significant difference. Microhardness measurements showed that all experimental groups decreased 1 day after exposure to water. After 84 days, microhardness showed no significant difference between Fuji IX GP EXTRA and Fuji IX GP, and Fuji II LC was the lowest. In the solubility measurement, Fuji IX GP EXTRA, Fuji IX GP, and Fuji II LC increased rapidly to 21 days. After 21 days, there was no significant difference in the three groups. As a result, short term fluoride release affects solubility and microhardness, but long term fluoride release has no correlation. Through this study, the amount of fluoride, microhardness, and solubility of various glass ionomers were evaluated, and these properties could be applied clinically.

이 연구의 목적은 고점도 글라스아이오노머와 레진 강화형 글라스아이오노머의 시간에 따른 불소 유리량, 미세경도, 용해도를 측정하고 비교하는 것이다. 고점도 글라스아이오노머인 Fuji IX GP EXTRA, Fuji IX GP, 레진 강화형 글라스아이오노머인 Fuji II LC를 실험군으로, Filtek$^{TM}$ Z350XT을 대조군으로 설정하였으며 탈이온수에 보관한 후 84일간 불소 유리량, 미세경도, 용해도를 측정하였다. 불소 유리량의 측정 결과 모든 글라스아이오노머는 1일에 불소 유리량이 가장 높았으며 서서히 감소하였다. 불소 유리량과 누적량은 Fuji IX GP EXTRA가 가장 높았으며 Fuji IX GP와 Fuji II LC는 유의한 차이를 보이지 않았다. 미세경도 측정 결과 모든 실험군에서 수분 노출 1일 후 측정에서 미세경도의 감소를 보였으며 84일 후 미세경도는 Fuji IX GP EXTRA와 Fuji IX GP가 유의한 차이를 보이지 않았고 Fuji II LC이 가장 낮았다. 용해도 측정에서 Fuji IX GP EXTRA, Fuji IX GP, Fuji II LC은 21일까지 급격히 증가하였으며 21일 이후에는 세 군이 유의한 차이를 보이지 않았다. 결과적으로 단기간의 불소 유리는 용해도와 미세경도에 영향을 미치지만 장기간의 불소 유리는 물성과 상관관계를 가지지 않았다. 이 연구를 통하여 여러 가지 글라스아이오노머의 불소 유리량, 미세경도, 용해도를 평가하였으며 이러한 특성을 임상적으로 적용 할 수 있을 것이다.

Keywords

References

  1. Wilson AD, Kent BE : The glass ionomer cement, a new translucent dental filling material. J Appl Chem Biotechnol, 21:3-13, 1971.
  2. Baig MS, Fleming GJ : Conventional glass-ionomer materials: A review of the developments in glass powder, polyacid liquid and the strategies of reinforcement. J Dent, 43:897-912, 2015. https://doi.org/10.1016/j.jdent.2015.04.004
  3. Kim KC, Kim S, Choi YC et al ., Pediatric dentistry, 5th ed. Dental wisdom, Seoul, 373-374, 2014.
  4. Wiegand A, Buchalla W, Attin T : Review on fluoridereleasing restorative materials-fluoride release and uptake characteristics, antibacterial activity and influence on caries formation. Dent Mater, 23:343-362, 2007. https://doi.org/10.1016/j.dental.2006.01.022
  5. Ko YM, Kwan YH, Choi HC et al ., Dental materials, 7th ed. Gunja publishing Co., Seoul, 238-239, 2015.
  6. Shiozawa M, Takahashi H, Iwasaki N : Fluoride release and mechanical properties after 1-year water storage of recent restorative glass ionomer cements. Clin Oral Investig, 18:1053-1060, 2014. https://doi.org/10.1007/s00784-013-1074-4
  7. Peez R, Frank S : The physical-mechanical performance of the new Ketac Molar Easymix compared to commercially available glass ionomer restoratives. J Dent, 34:582-587, 2006. https://doi.org/10.1016/j.jdent.2004.12.009
  8. Karantakis P, Helvatjoglou-Antoniades M, Theodoridou-Pahini S, Papadogiannis Y : Fluoride release from three glass ionomers, a compomer, and a composite resin in water, artificial saliva, and lactic acid. Oper Dent, 25:20-25, 2000.
  9. Silva RC, Zuanon AC, Machado JS, et al. : In vitro microhardness of glass ionomer cements. J Mater Sci Mater Med, 18:139-142, 2007. https://doi.org/10.1007/s10856-006-0672-y
  10. Zoergiebel J, Ilie N : Evaluation of a conventional glass ionomer cement with new zinc formulation: effect of coating, aging and storage agents. Clin Oral Investig, 17:619-626, 2013. https://doi.org/10.1007/s00784-012-0733-1
  11. De Moor RJ, Verbeeck RM : Changes in surface hardness of conventional restorative glass ionomer cements. Biomaterials , 19:2269-2275, 1998. https://doi.org/10.1016/S0142-9612(98)00135-5
  12. Mitra SB, Kedrowski BL : Long-term mechanical properties of glass ionomers. Dent Mater, 10:78-82, 1994. https://doi.org/10.1016/0109-5641(94)90044-2
  13. Peutzfeldt A, Garcia-Godoy F, Asmussen E : Surface hardness and wear of glass ionomers and compomers. Am J Dent, 10:15-17, 1997.
  14. Gemalmaz D, Yoruc B, Ozcan M, Alkumru HN : Effect of early water contact on solubility of glass ionomer luting cements. J Prosthet Dent, 80:474-478, 1998. https://doi.org/10.1016/S0022-3913(98)70014-9
  15. Nilufer Celebi B, Ibrahim T : Evaluation of the solubility of Resin- modified glass ionomer cements. Hacet Dent Facu M, 31:3-7, 2007.
  16. Yip HK, Lam WT, Smales RJ : Fluoride release, weight loss and erosive wear of modern aesthetic restoratives. Br Dent J, 187:265-270, 1999. https://doi.org/10.1038/sj.bdj.4800256
  17. Okada K, Tosaki S, Hirota K, Hume WR : Surface hardness change of restorative filling materials stored in saliva. Dent Mater, 17:34-39, 2001. https://doi.org/10.1016/S0109-5641(00)00053-1
  18. Aliping-McKenzie M, Linden RW, Nicholson JW : The effect of saliva on surface hardness and water sorption of glass-ionomers and “compomers”. J Mater Sci Mater Med, 14:869-873, 2003. https://doi.org/10.1023/A:1025630609544