References
- A. Rabiei and A. G. Evans, "Failure Mechanisms Associated with the Thermally Grown Oxide in Plasma-Sprayed Thermal Barrier Coatings," Acta Mater., 48 [15] 3963-76 (2000). https://doi.org/10.1016/S1359-6454(00)00171-3
- J. H. Cho, T. W. Kim, Y. G. Jung, and K. S. Lee, "Thermal and Mechanical Evaluation of the Thermal Barrier Layers Coated by Spray Dried Granules," J. Ceram. Process. Res., 10 [3] 344-50 (2009).
- K. S. Lee, D. H. Lee, and T. W. Kim, "Microstructure Controls in Gadolinium Zirconate/YSZ Double Layers and Their Properties," J. Ceram. Soc. Jpn., 122 [1428] 668-73 (2014). https://doi.org/10.2109/jcersj2.122.668
- A. G. Evans, D. R. Mumm, J. W. Hutchinson, G. H. Meier, and F. S. Pettit, "Mechanisms Controlling the Durability of Thermal Barrier Coatings," Prog. Mater. Sci., 46 [5] 505-53 (2001). https://doi.org/10.1016/S0079-6425(00)00020-7
- M. Watanabe, C. Mercer, C. G. Levi, and A. G. Evans, "A Probe for the High Temperature Deformation of Thermal Barrier Oxides," Acta Mater., 52 [6] 1479-87 (2004). https://doi.org/10.1016/j.actamat.2003.11.029
- A. G. Evans and J. W. Hutchinson, "The Mechanics of Coating Delamination in Thermal Gradients," Surf. Coat. Technol., 201 [18] 7905-16 (2007). https://doi.org/10.1016/j.surfcoat.2007.03.029
- D. H. Lee, T. W. Kim, and K. S. Lee, "Design of Thermal Barrier Coatings using Gadolinium Zirconate Ceramics: A Study on Gadolinium Zirconate/YSZ Bilayers," J. Ceram. Soc. Jpn., 117 [1365] 550-54 (2009). https://doi.org/10.2109/jcersj2.117.550
- S. W. Myoung, J. H. Kim, W. R. Lee, Y. G. Jung, and K. S. Lee, "Microstructure Design and Mechanical Properties of Thermal Barrier Coatings with Layered Top and Bond Coats," Surf. Coat. Technol., 205 [5] 1229-35 (2010). https://doi.org/10.1016/j.surfcoat.2010.08.063
- K. S. Lee, S. K. Lee, B. R. Lawn, and D. K. Kim, "Contact Damage and Strength Degradation in Brittle/Quasi-Plastic Silicon Nitride Bilayers," J. Am. Ceram. Soc., 81 [9] 2394-404 (1998). https://doi.org/10.1111/j.1151-2916.1998.tb02635.x
- B. R. Lawn, "Indentation of Ceramics with Spheres: A Century after Hertz," J. Am. Ceram. Soc., 81 [8] 1977-94 (1998). https://doi.org/10.1111/j.1151-2916.1998.tb02580.x
- D. H. Lee and K. S. Lee, "Mechanical Behavior of Layered YSZ Thermal Barrier Coatings using Indentation Test," J. Korean Ceram. Soc., 48 [5] 396-403 (2011). https://doi.org/10.4191/kcers.2011.48.5.396
- G. Bertrand, P. Bertrand, P. Roy, C. Rio, and R. Mevrel, "Low Conductivity Plasma Sparyed Thermal Barrier Coatings using Hollow PSZ Spheres: Correlation between Thermophysical Properties and Microstructure," Surf. Coat. Technol., 202 [10] 1994-2001 (2008). https://doi.org/10.1016/j.surfcoat.2007.08.042
-
F. Press, "Optimization of the
$NiCrAI-Y/ZrO_2-Y_2O_3$ Thermal Barrier System," (NASA, Lewis Research Center, Cleveland, OH, 1985). - D. H. Lee, N. K. Kang, K. S. Lee, H. S. Moon, H. T. Kim, and C. Kim, "Evaluation of Thermal Durability of Thermal Barrier Coating and Change in Mechanical Behavior," J. Korean Ceram. Soc.,54 [4] 314-22(2017). https://doi.org/10.4191/kcers.2017.54.4.05
- W. C. Oliver and G. M. Pharr, "An Improved Technique for Determining Hardness and Elastic Modulus using Load and Displacement Sensing Indentation Experiments," J. Mater. Res., 7 [6] 1564-83 (1992). https://doi.org/10.1557/JMR.1992.1564