한국구조물진단유지관리공학회 논문집 (Journal of the Korea institute for structural maintenance and inspection)

  • 제22권6호
  • /
  • Pages.30-36
  • /
  • 2018
  • /
  • 2234-6937(pISSN)
  • /
  • 2287-6979(eISSN)
한국구조물진단유지관리공학회 (Korea Institute for Structural Maintenance Inspection)
권호 표지
DOI QR코드

DOI QR Code

이 방향 탄소섬유 스트립을 사용하여 보강된 콘크리트 보의 거동에 대한 연구

Performance of Reinforced Concrete Beams Strengthened with Bi-directional CFRP Strips

  • 투고 : 2018.06.27
  • 심사 : 2018.10.19
  • 발행 : 2018.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

기존 콘크리트 구조물의 노후화 또는 지진과 같은 외부 하중에 의하여 구조물의 구조 성능이 저하되기 때문에, 기존 건물의 보수 및 보강 연구는 중요하다. 외부부착 탄소섬유 보강 공법과 같은 효율적인 보수 공법을 사용하면 경제적으로 콘크리트 구조물의 구조 성능을 높일 수 있다. 따라서 외부부착 탄소섬유를 사용한 콘크리트 부재의 실험 연구는 많이 진행되었다. 특히, 콘크리트 보를 사용한 전단 보강에 관한 연구는 탄소섬유의 양, 부착 각도, 스트립의 폭, 그리고 재료간의 상호작용에 관한 것이었다. 하지만 선행된 연구에 비하여 탄소섬유의 이 방향 레이아웃에 관한 다양한 변수 연구는 부족한 상황이다. 따라서 이 연구에서는 이 방향 레이아웃 외부부착 탄소섬유 공법을 사용하여 콘크리트 보의 전단보강 효과를 검증하였다. 이 방향 레이아웃의 보강 효과는 스터럽과의 전단 기여도, 실험체의 전단 거동과 보강 시점에 따른 최대 내력의 비교를 통하여 이루어졌다.

Researches on strengthening and rehabilitation are important since structural capacity is degraded by deterioration or damage of structural members. An effective strengthening scheme such as an externally bonded Carbon Fiber Reinforced Polymers (CFRP) can improve the structural performance of a concrete structure in a cost-effective way. Therefore, many experimental studies on strengthening methods have been widely carried out. In regards to the shear strengthening of a concrete beam, variables of the experimental studies were the amount of CFRP, the angle of the strip, the width of the strip, and the interaction between the materials. However, there are insufficient researches on bi-directional CFRP layout compared to the previous researches. In this study, a total of ten concrete beams were designed and tested to evaluate the shear strengthening effect using CFRP strips. The effectiveness of strengthening was investigated based on the shear contribution of materials, strain distribution of stirrup, and the maximum shear capacity of specimens.

키워드

참고문헌

  1. Bousselham, A., and Chaallal, O. (2008), Mechanisms of Shear Resistance of Concrete Beams Strengthened in Shear with Externally Bonded FRP, Journal of Composites for Construction, 12(5), 499-512. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:5(499)
  2. Cao, S. Y., Chen, J. F., Teng, J. G., and Chen, J. (2005), Debonding in RC Beams Shear Strengthened with Complete FRP Wraps, Journal of Composites for Construction, 9(5), 417-428. https://doi.org/10.1061/(ASCE)1090-0268(2005)9:5(417)
  3. Deniaud, C., and Cheng, J. J. R. (2003), Reinforced Concrete T-Beams Strengthened in Shear with Fiber Reinforced Polymer Sheets, Journal of Composites for Construction, 7(4), 302-310. https://doi.org/10.1061/(ASCE)1090-0268(2003)7:4(302)
  4. Islam, M. R., Mansur, M. A., and Maalej, M. (2005), Shear strengthening of RC deep beams using externally bonded FRP systems, Cement and Concrete Composites, 27, 413-420. https://doi.org/10.1016/j.cemconcomp.2004.04.002
  5. Khalifa, A., and Nanni, A. (2000), Improving shear capacity of existing RC T-section beams using CFRP composites, Cement and Concrete Composites, 22, 165-174. https://doi.org/10.1016/S0958-9465(99)00051-7
  6. Kim, C., Ghannoum, W. M., and Jirsa, J. O. (2016), Behavior of Reinforced Concrete Panels Strengthened with Carbon Fiber Reinforced Polymers (CFRP), ACI Structural Journal, 113(5), 1077-1084.
  7. Kim, C., Jirsa, J. O., and Ghannoum, W. M. (2017), Performance of Concrete Panels Reinforced with Carbon Fiber-Reinforced Polymer Materials, Journal of Composites for Construction, ASCE., 21(3), 04016100-1 - 8. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000758
  8. Kim, Y., Quinn, K., Ghannoum, W. M., and Jirsa, J. O. (2014), Strengthening of Reinforced Concrete T-Beams Using Anchored CFRP Materials, ACI Structural Journal, 111(5), 1027-1036. https://doi.org/10.14359/51686805
  9. Leung, C. K. Y., Chen, Z., Lee, S., Ng, M., Xu, M., and Tang, J. (2007), Effect of Size on the Failure of Geometrically Similar Concrete Beams Strengthened in Shear with FRP Strips, Journal of Composites for Construction, 11(5), 487-496. https://doi.org/10.1061/(ASCE)1090-0268(2007)11:5(487)
  10. Mofidi, A., and Chaallal, O. (2011), Shear Strengthening of RC Beams with Externally Bonded FRP Composites: Effect of Strip-Width-to-Strip-Spacing Ratio, Journal of Composites for Construction, 15(5), 732-742. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000219
  11. Mofidi, A., and Chaallal, O. (2014), Effect of Steel Stirrups on Shear Resistance Gain Due to Externally Bonded Fiber-Reinforced Polymer Strips and Sheets, ACI Structural Journal, 111(2), 353-362.
  12. Pellegrino, C., and Modena, C. (2006), Fiber-Reinforced Polymer Shear Strength of Reinforced Concrete Beams: Experimental Study and Analytical Modeling, ACI Structural Journal, 103(5), 720-728.
  13. Zhang, Z., and Hsu, C. T. (2005), Shear Strengthening of Reinforced Concrete Beams Using Carbon-Fiber-Reinforced Polymer Laminates, Journal of Composites for Construction, 9(2), 158-169. https://doi.org/10.1061/(ASCE)1090-0268(2005)9:2(158)