DOI QR코드

DOI QR Code

재활용 AC4A 알루미늄 합금의 인장특성에 미치는 (Ti-B), Sr 첨가제의 영향

Effect of Sr and (Ti-B) Additives on Tensile Properties of AC4A Recycled Aluminum Casting Alloys

  • 오승환 (부경대학교 대학원 금속공학과) ;
  • 김헌주 (부경대학교 공과대학 금속공학과)
  • Oh, Seung-Hwan (Department of Metallurgical Eng, Pukyong National Graduate School) ;
  • Kim, Heon-Joo (Department of Metallurgical Eng, Pukyong National Univ.)
  • 투고 : 2018.03.29
  • 심사 : 2018.06.11
  • 발행 : 2018.10.31

초록

The effects of Sr and (Ti-B) additives on the tensile properties of AC4A recycled (35% scrap content) aluminum alloys were investigated. An acicular morphology of the eutectic Si phase of as-cast specimens was converted to a fibrous morphology upon the addition of Sr. Moreover, morphology of the Sr modified eutectic Si phase became finer due to a T6 heat treatment. The grain size of the ${\alpha}$-solid solution was decreased by the addition of (Ti-B) additives. Depending on the treatment conditions of the as-cast specimens, i.e., no addition, a Sr addition and a (Ti-B)+Sr addition, the tensile strength levels of the as-cast specimens were 182, 192, and 204MPa, respectively. The corresponding strengths of T6 heat-treated specimens were 293, 308, and 318MPa. Elongations of the as-cast specimens were 2.2, 3.1, and 5.6%, and the corresponding elongations of the T6 heat-treated specimens were 4.6, 6.1, and 7.6%. The percentage of the reduced section area in the tensile specimens was also increased by the Sr and (Ti-B) additives. Sr and (Ti-B) additives changed the microstructure and the distribution of defects in the castings, resulting in an improvement of the tensile properties of AC4A aluminum alloys. According to our test results, recycled (35% scrap content) AC4A aluminum alloy met all of the KS requirements of the tensile strength and elongation values of AC4A aluminum alloy except for the elongation value of the one specimen condition, in this case the as-cast no-addition condition.

키워드

참고문헌

  1. Wolf S, Hoberg H, 3rd ASM International Conference Recylcling Metals, ASM International, Brussels (1997) 257-267.
  2. Kim HJ, J. Korea Foundry Society, "Effect of Fe, Mn content on the tensile property of Al-4wt%Mg-0.9%Si alloy system for high pressure die casting", 33 (2013) 103-112. https://doi.org/10.7777/jkfs.2013.33.3.103
  3. Riestra M, Ghassemali E, Bogdanoff T and Seifeddine S, Materials Science and Engineering A, "Interactive effects of grain refinement, eutectic modification and solidification rate on tensile properties of Al-10Si alloy", 703 (2017) 270-279. https://doi.org/10.1016/j.msea.2017.07.074
  4. Gruzleski JE and Closset BM, The Treatment of Liquid Aluminum-Silicon Alloys, The American Foundry's Society, Inc., USA (1999) 75-141.
  5. Santner JS, Metallurgical Transactions A, "A Study of Fracture in High Purity 7075 Aluminum Alloys", 9 (1978) 769-779. https://doi.org/10.1007/BF02649786
  6. Basava kumar KG, Mukunda PG and Chakraborty M, International Journal of Impact Engineering, "Impact toughness in Al-12Si and Al-12Si-3Cu cast alloys-Part 1: Effect of process variables and microstructure", 35 (2008) 199-205. https://doi.org/10.1016/j.ijimpeng.2007.03.002
  7. Flemings MC, Materials Transactions, "Coarsening solidification processing", 46 (2005) 895-900. https://doi.org/10.2320/matertrans.46.895
  8. Wang J, Horsfield A, Schwingenchlogl U and Lee PD, Physical Review B, "Heterogeneous nucleation of solid Al from the melt by TiB2 and Al3Ti: An ab initio molecular dynamics study", 82 (2010) 184203 1-10.
  9. Easton M and StJohn D, Metallurgical and Materials Transactions A, "Grain refinement of aluminum alloys Part 1. the nucleant and solute paradigms-a review of the literature", 30 (1999) 1613-1623. https://doi.org/10.1007/s11661-999-0098-5
  10. Sigworth GK and Kuhn TA, International Journal of Metalcasting "Grain refinement of aluminum casting alloys", 1 (2007) 31-40. https://doi.org/10.1007/BF03355416
  11. Backerud L, Chai G and Tamminen J, Solidification Charateristics of Aluminum Alloys Volume 2: Foundry Alloys, American Foundry Society Inc., USA (1990) 25-27.
  12. Lu SZ, Hellawell A, Metallurgical Transactions A, "The mechanism of silicon modification in Al-Si alloy : impurity induced twining", 18A (1987) 1721-1733.
  13. Stunova BB, Modern Machinery Science Journal, "Study of AlSi10Mg alloy structure after modification by various Sr agents", 18 (2012) 318-321.
  14. Kim HJ, J. Korea Foundry Society, "Effect of scrap content on the impact property and fatigue property of AC4A alloy", 36 (2016) 187-194. https://doi.org/10.7777/jkfs.2016.36.6.187
  15. Gruzleski JE. and Closset BM, The Treatment of Liquid Aluminum-Silicon Alloys, The American Foundry's Society, Inc., USA (1990) 39-41.
  16. Kim HJ, J. Korea Foundry Society, "Effect of Sc, Sr elements on eutectic Mg2Si modification and castability ofAl-4wt%Mg-0.9wt%Si-0.3wt%Mn-0.15wt%Fe casting alloy", 35 (2015) 147-154. https://doi.org/10.7777/jkfs.2015.35.6.147
  17. Timpel M, Wanderka N, Vinod Kumar GS and Banhart J, Ultramicroscopy, "Microstructural investigation of Srmodified Al-15 wt%Si alloys in the range from micrometer to atomic scale", 111 (2011) 695-700. https://doi.org/10.1016/j.ultramic.2010.12.023
  18. Jung CY, Materials Transactions, "High temperature mechanical properties of Al-Si-Mg-(Cu) alloys for automotive cylinder heads", 54 (2013) 588-594. https://doi.org/10.2320/matertrans.M2012285
  19. Kim HJ, J. the Korea Foundry Society, "Effect of Fe, Mn content on the tensile property of Al-4 wt%Mg-0.9 wt%Si alloy system for high pressure die casting", 33 (2013) 103- 112. https://doi.org/10.7777/jkfs.2013.33.3.103
  20. Oh SH and Kim HJ, J. Korea Foundry Society, "Effect of minor additives on casting properites of AC4A aluminum casting alloys", 37 (2017) 148-156.
  21. Dong X, Zhang Y and JI S, Materials Science and Engineering A, "Enhancement of mechanical properties in high silicon gravity cast AlSi9Mg alloy refined by Al3Ti3B master alloy", 700 (2017) 291-300. https://doi.org/10.1016/j.msea.2017.06.005