초록
전기 소자 중의 하나인 퓨즈는 전기 부품에 비정상적으로 흐르게 되는 과전류로 인한 전로나 기기 보호를 위하여 사용 및 개발되고 있다. 대표적인 형태로는 유리관퓨즈가 많이 사용 되고 있는데, 최근 납이 함유된 솔더의 사용에 대한 국내 및 국제 규제가 강화 되면서 무연 솔더로의 변경으로 인한 문제가 대두 되고 있다. 본 연구에서는 유리관퓨즈의 솔더링 공정에서 솔더를 기존의 납이 함유된 솔더에서 무연 솔더로 변경 한 후, 퓨즈캡을 가용체와 솔더링할 때 용융된 솔더가 퓨즈 바깥으로 넘쳐흐르는 현상을 수치해석으로 모사하였고, 해석 결과를 바탕으로 솔더의 넘침 현상을 막을 수 있는 방안을 찾아 그 효과를 검증하였다. 검증 결과, 솔더링 실시 전에 유리관 내부의 온도를 충분히 증가시키는 것이 솔더의 넘침을 예방하는데 도움이 되며, 중력이 솔더가 흘러나가는 반대방향으로 작용하도록 솔더링을 하게 되면 넘침을 막는 데 효과가 있음을 확인하였다.
Fuses are used to protect electric circuits or devices from excess current. Glass-tube fuses are typically used, but problems have arisen due to the mandated switch from conventional solder to lead-free solder. This study used CFD to simulate the phenomenon of molten solder being poured out of a fuse during the soldering process for a fuse cap and fuse element. In addition, a method is proposed to prevent solder from overflowing, and its effectiveness was verified based on the analysis results. The results show that a sufficient increase of the temperature inside the glass tube before soldering and gravity can help to prevent the solder from overflowing.