참고문헌
- Allen, R.G., Jones, R.R. & Taylor, D.W., 1978. A simplified method for determining structural design-limit pressures on high performance marine vehicles. In Advanced Marine Vehicles Conference, San Diego, California, 17-19 April 1978.
- Dieck, R.H., W.G. Steele & Osolsobe, G. 2005. Test Uncertainty. ASME PTC 19.1-2005. American Society of Mechanical Engineers.
- Garme, K., Rosen, A. & Kuttenkeuler, J., 2010. In detail investigation of planing pressure. In Proceedings of Hydralab III Joint Transnational Access User Meeting, Hannover, Germany, Febuary, 2010.
- Grigoropoulos, G.J. & Damala, D.P., 2001. Measurement of bottom pressures on planing craft. WIT Transactions on Modeling and simulation, 30.
- Kapryan, W.J. & Boyd Jr, G. M., 1955. Hydrodynamic pressure distributions obtained during a planing investigation of five related prismatic surfaces. NACA Technical Note No.3477.
- Kawata, T. & Obi, S., 2014. Velocity-pressure measurement based on planar PIV and miniature static pressure probes. Experiments in Fluids, 55(7), Article No. 1776.
- Kim, D.J., 2012. A study on the running attitude and dynamic stability of a semi-displacement round bilge vessel at high speed. Ph.D. Thesis. Seoul National University.
- Kim, Y.M., 2015. System modeling and control of wire-driven high-speed towing carrage for uniform speed. Master Thesis. Seoul National University.
- Sanotoro, N., Begovic, E., Bertorello, C., Bove, A., De Rosa. & Franco, F., 2014. Experimental study of the hydrodynamic loads on high speed planing craft. Procedia Engineering, 88, pp.186-193. https://doi.org/10.1016/j.proeng.2014.11.143
- Savitsky, D., 1992. Overview of planing hull developments. In High Performance Marine Vehicle Conference and Exhibit, Arlington, Texas, June 1992.
- Sottorf, W. 1934. Experimental with planing surfaces. NACA Technical Note No.739.