참고문헌
- S. H. Kang and S. W. Hong, Recent Progress in Flexible/Wearable Electronics, J. of Welding and Joining, 32(3), 34(2014). https://doi.org/10.5781/JWJ.2014.32.3.34
- J. Y. Park and J. S. Park, The Present Status and Future Aspects ofthe Marketfor Printed Electronics, J. of Korea Institute of Information and Communication Engineering, 17(2), 263(2013). https://doi.org/10.6109/JKIICE.2013.17.2.263
- E. H. Lee and D. S. Kim, Effects of Surface-modification of Carbon Black on the Characteristics of Polymerized Toner, Korean Chem. Eng. Res., 51(5), 628(2013). https://doi.org/10.9713/kcer.2013.51.5.628
- K. Y. Kim, H. Y. Rhyoo, S. J. Cho, K. E. Yoon, and S. I. Yang, Oxidation and Surface Functional Group Analyses under Ozone Treatment of Carbon Black, Elastomer and Composites, 40(3), 188(2005).
- Ministry of Knowledge Economy, "Report C", Ministry of Knowledge Economy, Sejong, 2012.
- K. J. Lee, B. S. Seo, J. S. Yang, B. Y. Seong, and D. H. Park, Thermal Properties of Semi-conductive Composites for DC Power Cable, J. of the Korean Institute of Electrical and Electronic Materials Engineers, 26(1), 49(2013). https://doi.org/10.4313/JKEM.2013.26.1.49
- J. M. Lee, S. R. Ryu, and D. J. Lee, Electrical and Mechanical Properties of Carbon Particle Reinforced Rubberfor Electro-active Polymer Electrode, Trans. Korean Soc. Mech. Eng. A, 37(12), 1465(2013). https://doi.org/10.3795/KSME-A.2013.37.12.1465
- J. M. Lee, S. R. Ryu, D.J. Lee, and Z.J. Lin, An Experimental Study for Electro-active Polymer Electrode and Actuator, Composites Research, 26(5), 289(2013). https://doi.org/10.7234/composres.2013.26.5.289
- M. S. Park, Suspension Polymerization with Hydrophobic Silica as a Stabilizer II, Preparation of Polystyrene Composite Particles Containing Carbon Black, Polymer(Korea), 30(6), 505(2006).
- M. Y. Lee, K. E. Bae, S. H. Kim, S. C. Lim, and S. Y. Nam, Effect of Dispersant Contents on the Dispersity of Conductive Carbon-black and Properties of Screen-printed Source-drain Electrodes for OTFTs, Polymer (Korea), 33(5), 397(2009).
- S. W. Song, E. H. Min, D. W. Lee,J. S. Kim, and W. T. Oh, Structural and Thermal Characteristics of Graphites Treated in Acidic Solutions, Korean J. Mater. Res., 27(2), 113(2017). https://doi.org/10.3740/MRSK.2017.27.2.113
- G. W. Lee, J. S. Kim, J. H. Yoon, J. S. Bae, B. C. Shin, I. S. Kim, and W. T. Oh, Structural Characterization of Carboxylated Multi-walled Carbon Nanotubes, Advanced Materials, 8(12), 1012(1996). https://doi.org/10.1002/adma.19960081216
- G. Y. Park, J. S. Kim, and Y. J. Jeong, Comparison of Characteristics of Multi-walledCarbon Nanotubes Functionalized using Various Methods, Textile Science and Engineering, 45(6), 359(2008).
- H. K. Han, J. W. Lee, D. W. Park, and S. E. Shim, Surface Modification of Carbon Black by Oleic Acid for Miniemulsion Polymerization of Styrene, Macromol. Res., 18(5), 435(2010). https://doi.org/10.1007/s13233-010-0505-1
- H. S. Jang, J. H. Hong, J. W. Lee, and S. E. Shim, Microencapsulation of Surface-modified Carbon Black by Miniemulsion Polymerization, Korean Chem. Eng. Res., 46(4), 669(2008).
- C. U. Pittman, G. R. He, B. Wu, and S. D. Gardner, Chemical Modification of Carbon Fiber Surfaces by Nitric Acid Oxidation Followed by Reaction with Tetraethylenepentamine, Carbon, 35(3), 317(1997). https://doi.org/10.1016/S0008-6223(97)89608-X
- K. Kamegawa, K. Nishikuba, M. Kodama, Y. Adachi, and H. Yoshida, Oxidative Degradation of Carbon Blacks with Nitric Acid II, Formulation of Water-soluble Polynuclear Aromatic Compounds, Carbon, 40, 1447(2002). https://doi.org/10.1016/S0008-6223(01)00310-4
- F. Trotta, E. Drioli, G. Moraglio, and E. B. Poma, Sulfonation of Polyetheretherketone by Chlorosulfuric Acid, J. of Applied Polymer Science, 70(3), 477(1998). https://doi.org/10.1002/(SICI)1097-4628(19981017)70:3<477::AID-APP8>3.0.CO;2-K
- R. Guan, H. Zou, D. Lu,C. Gong, and Y. Liu, Polyethersulfone Sulfonated by Chlorosulfonic Acid and its Membrane Characteristics, European Polymer J., 41, 1554 (2005). https://doi.org/10.1016/j.eurpolymj.2005.01.018
- C. K. Kim, G. J. Lee, and C. K. Rhee, Deaggregation and Ultradispersion of Detonation Nanodiamonds in Polar Solvent using Physicochemical Treatments, J. of Korean Powder Metallurgy Institute, 20(6), 469(2013).
- M. L. Sham and J. K. Kim, Surface Functionalities of Multi-wall Carbon Nanotubes after UV/ozone and TETA Treatments, Carbon, 44, 768(2006). https://doi.org/10.1016/j.carbon.2005.09.013
- C. E. Hong,J. H. Lee, P. Kalappa, and S. G. Advani, Effects of Oxidative Conditions on Properties of Multi-walled Carbon Nanotubesin Polymer Nanocomposites, Compos. Sci. Technol., 67, 1027(2007). https://doi.org/10.1016/j.compscitech.2006.06.003
- G. W. Lee, J. S. Kim, J. H. Yoon, J. S. Bae, B. C. Shin, I. S. Kim, W. Oh, and M. Ree, Structural Characterization of Carboxylated Multi-walled Carbon Nanotubes, Thin Solid Films, 516, 5781(2008). https://doi.org/10.1016/j.tsf.2007.10.071
- C. K. Chung, M. H. Lee, and E. K. Choe, Characterization Cotton Fabric Scouring by FT-IR ATR Spectroscopy, Carbonhydrate Polymers, 58(4), 417(2004). https://doi.org/10.1016/j.carbpol.2004.08.005
-
A. G. Osorio, I. C. L. Silveira, V. L. Bueno, and C. P. Bergmann,
$H_2SO_4/HNO_3/HCl$ -Functionalization and its Effect on Dispersion of Carbon Nanotubes in Aqueous Media, Applied Surface Science, 255(5), 2485(2008). https://doi.org/10.1016/j.apsusc.2008.07.144 - H. Zhang, W. P. Low, and H. K. Lee, Evaluation of Sulfonated Graphene Sheets as Sorbent for Micro-solid-phase Extraction Combined with Gas Chromatography-mass Spectrometry, J. of Chromatography A, 1233(13), 16(2012). https://doi.org/10.1016/j.chroma.2012.02.020
- C.C. Lin,C.B.Chang, and Y. Z.Wang, Preparation and Properties ofCross-linked Sulfonated Poly(imide-siloxane) for Polymer Electrolyte Fuel Cell Application, J. of Power Sources, 223(1), 277(2013). https://doi.org/10.1016/j.jpowsour.2012.09.068
- J. C. Yang, M. J. Jablonsky, and J. W. Mays, NMR and FT-IR Studies of Sulfonated Styrene-based Homopolymers and Copolymers, Polymer, 43(19), 5125(2002). https://doi.org/10.1016/S0032-3861(02)00390-7
- S. J. Park, J. S. Hwang, W. K. Choi, H. K. Lee, and K. M. Huh, Enhanced Hydrophilicity of Polyethersulfone Membrane by Various Surface Modification Methods, Polymer(Korea), 38(2), 205(2014).
-
G. Zhang, S. Sun, D. Yang,J. P. Dodelet, and E. Sacher, The Surface Analytical Characterization of Carbon Fibers Functionalized by
$H_2SO_4/HNO_3$ Treatment, Carbon, 46(2), 196(2008). https://doi.org/10.1016/j.carbon.2007.11.002 - G. Jung, C. W. Nah, M. K. Seo, J. H. Byun, J. H. Lee, and S.J. Park, Influence of Acid and Base Surface Treatment of Multi-walled Carbon Nanotubes on Mechanical Interfacial Properties of Carbon Fibers-reinforced Composites, Polymer(Korea), 36(5), 612(2012).
- A. Jung, R. Graupner, L. Ley, and A. Hirsch, Quantitative Determination of Oxidative Defects on Single Walled Carbon Nanotubes, Physica Status Solidi(b), 243(13), 3217(2006). https://doi.org/10.1002/pssb.200669128
- S. J. Park, J. S. Shin, and J. Kawasaki, Ammonia Removal of Activated Carbons Treated by Anodic Oxidation, J. of the Korean Industrial and Engineering Chemistry, 14(4), 418(2003).
- M. M. Nasef and H. Saidi, Surface Studies of Radiation Grafted Sulfonic Acid Membranes: XPS and SEM Analysis, Applied Surface Science, 252(8), 3073(2006). https://doi.org/10.1016/j.apsusc.2005.05.013
- G. W. Lee, J. S. Kim, J. H. Yoon, J. S. Bae, B. C. Shin, I. S. Kim, W. Oh, and M. Ree, Structural Characterization of Carboxylated Multi-walled Carbon Nanotubes, Thin Solid Films, 516, 5781(2008). https://doi.org/10.1016/j.tsf.2007.10.071
- Y.B. Ha, S. S. Oh, andW.J. Lee, The Study of the Printability on the Phenol Free Heat-set Web Inks(II), J. of Korea TAPPI, 44(3), 41(2012).
- Y. B. Ha, Y. K. Lee, C. K. Kim, S. S. Oh, and J. H. Lim, The Study of Printed Mottle on Properties of Coated Paper and Ink Dispersion(I), J. of Korea TAPPI, 38(4), 47(2006).
- K. S. Nam, S. M. Yoon, S. H. Lee, D. S. Kim, and C. H. Kim, Effect of Properties of Conductive Ink on Printability of Electrode Patterning by Gravure Printing Method, J. Korean Society Precision Engineering, 30(6), 573(2013). https://doi.org/10.7736/KSPE.2013.30.6.573
- Y.B. Ha, S. S. Oh, and W.J. Lee, The Study of the Printability on the Phenol Free Heat-set Web Inks(III), J. of Korea TAPPI, 44(4), 77(2012).