Journal of the Korean Society of Propulsion Engineers (한국추진공학회지)

The Korean Society of Propulsion Engineers (한국추진공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Model for Gas Venting Characteristic of Pressure Vessel for Propulsion System

추진체계 가압용 압력용기의 기체배출특성 모델에 관한 연구

  • Received : 2017.06.07
  • Accepted : 2017.09.15
  • Published : 2018.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

Developing model to predict the characteristic of vented gas was vented through an orifice is presented. Simulations with models which were developed with assumptions considering heat transfer inside the vessel were conducted. Also, representative pressure and temperature were measured from experiments with the pressure vessel which is applicable to a propulsion system. Developed model were verified with comparison between calculations and experiments.

가압용 압력용기로부터 오리피스를 통해 기체가 배출되는 경우에 대하여 기체배출특성을 예측하기 위한 모델 개발에 대한 연구이다. 추진체계에 사용하기 적합한 압력용기에 대해 시험을 수행하여 대표적인 압력과 온도를 계측하였고, 압력용기 내부의 열전달에 대한 가정과 이에 대한 모델을 적용하여 시뮬레이션을 통해 압력과 온도를 예측하여 비교하였다. 그 결과 제안된 열전달 모델을 통해 계측된 압력과 온도와 유사한 예측 결과를 확인하였다.

Keywords

References

  1. Landram, C.S., "Heat Transfer During Vessel Discharge: Mean and Fluctuating Gas Temperature," Journal of Heat Transfer, Vol. 95, No. 1, pp. 101-106, 1973. https://doi.org/10.1115/1.3449976
  2. Johnston, S .S. and Dwyer, H.A., "Thermal Instabilities in Discharging Gas Reservoirs," Journal of Heat Transfer, Vol. 98, No. 3, pp. 360-366, 1976. https://doi.org/10.1115/1.3450561
  3. Paolucci, S., "Heat Transfer During te Early Expansion of Gas in Pressureized Vessls," Int. Journal of Heat Mass Transfer, Vol. 28, No. 8, pp. 1525-1537, 1985. https://doi.org/10.1016/0017-9310(85)90255-8
  4. Haque, M., Richardson, S., Saville, G. Chamberlain, G. and Shirvill, L., "Blowdown of Pressure Vessels. II. Experimental Validation of Computer Model and Case Studies," Trans ICHemE, Part B, Proc Safe Env Prot, Vol 70, No. B1, pp. 10-17, 1992.
  5. Kim, K.U., Seo J.W., Hwang, S.W., Lee, Y.J. and Moon, Y.S., "Dynamic Modeling & Analysis of Vapor Phase Blowdown of Depressurized Vessel," The Korean journal of chemical engineering, Vol. 54, No. 3, pp. 350-359, 2016. https://doi.org/10.9713/kcer.2016.54.3.350
  6. Winters, W.S., Evans, G.H., Rice, S.F. and Grief, R., "An Experimental and Theoretical Study of Heat and Mass Transfer During the Venting of Gas from Pressure Vessels," Int. Journal of Heat and Mass Transfer, Vol. 55, No. 1-3, pp. 8-18, 2012. https://doi.org/10.1016/j.ijheatmasstransfer.2011.08.023
  7. Andersen, B.W., The Analysis and Design of Pneumatic Systems, Corrected ed., Krieger Pub. Co., Malabar, F.L., U.S.A., Ch. 2, 2001.