Carbon letters

  • 제27권
  • /
  • Pages.72-80
  • /
  • 2018
  • /
  • 1976-4251(pISSN)
  • /
  • 2233-4998(eISSN)
한국탄소학회 (Korean Carbon Society)
권호 표지
DOI QR코드

DOI QR Code

Comparative study on carboxylated styrene butadiene rubber composites reinforced by hybrid fillers of rice bran carbon and graphite carbon

  • Fan, Yuan (School of Energy, Materials and Chemical Engineering, Korea University of Technology and Education) ;
  • Li, Qingyuan (School of Energy, Materials and Chemical Engineering, Korea University of Technology and Education) ;
  • Li, Xiangxu (School of Energy, Materials and Chemical Engineering, Korea University of Technology and Education) ;
  • Lee, Dam hee (School of Energy, Materials and Chemical Engineering, Korea University of Technology and Education) ;
  • Cho, Ur Ryong (School of Energy, Materials and Chemical Engineering, Korea University of Technology and Education)
  • 투고 : 2017.10.23
  • 심사 : 2017.12.18
  • 발행 : 2018.07.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In the present work, a comparative study of the mechanical behavior of two series of elastomeric composites, based on carboxylated styrene butadiene rubber (X-SBR) and reinforced with rice bran carbon (RBC) and graphite, is reported. Hybrid composites of X-SBR filled with RBC-graphite were also investigated in terms of the cure characteristics, hardness, tensile properties, abrasion resistance, and swelling. It was observed that the cure times decreased with the incorporation of a carbon filler whereas the torque difference, tensile strength, tensile modulus, hardness, and swelling resistance increased compared to the neat X-SBR revealing a favorable characteristic of crosslinking. Dynamic rheological analysis showed that the G' values of the composites, upon the addition of RBC-graphite, were changed to some extent. This demonstrates that the presence of a strongly developed network of fillers will ensure a reinforcing characteristic in a polymer matrix.

키워드

참고문헌

  1. Saowapark T, Plao-le S, Chaichana E, Jaturapiree A. Role of eco-friendly molasses carbon powder as a filler in natural rubber vulcanizates. Mater Today Proc, 4, 6450 (2017). https://doi.org/10.1016/j.matpr.2017.06.152.
  2. Nanda M, Tripathy DK. Physico-mechanical and electrical properties of conductive carbon black reinforced chlorosulfonated polyethylene vulcanizates. eXPRESS Polym Lett, 2, 855 (2008). http://doi.org/10.3144/expresspolymlett.2008.100.
  3. Lee SE, Cho S, Lee YS. Mechanical and thermal properties of MWCNT-reinforced epoxy nanocomposites by vacuum assisted resin transfer molding. Carbon Lett, 15, 32 (2014). https://doi.org/10.5714/cl.2014.15.1.032.
  4. Jin FL, Lee SY, Park SJ. Polymer matrices for carbon fiber-reinforced polymer composites. Carbon Lett, 14, 76 (2013). http://doi.org/10.5714/CL.2013.14.2.076.
  5. Kueseng K, Jacob KI. Natural rubber nanocomposites with SiC nanoparticles and carbon nanotubes. Eur Polym J, 42, 220 (2006). https://doi.org/10.1016/j.eurpolymj.2005.05.011.
  6. Mao Y, Wen S, Chen Y, Zhang F, Panine P, Chan TW, Zhang L, Liang Y, Liu L. High performance graphene oxide based rubber composites. Sci Rep, 3, 2508 (2013). https://doi.org/10.1038/srep02508
  7. Kim H, Abdala AA, Macosko CW. Graphene/polymer nanocomposites. Macromolecules, 43, 6515 (2010). https://doi.org/10.1021/ma100572e.
  8. Liu Z, Zhang Y. Enhanced mechanical and thermal properties of SBR composites by introducing graphene oxide nanosheets decorated with silica particles. Composites Part A Appl Sci Manuf, 102, 236 (2017). https://doi.org/10.1016/j.compositesa. 2017.08.005.
  9. Lin Y, Liu S, Peng J, Liu L. The filler-rubber interface and reinforcement in styrene butadiene rubber composites with graphene/silica hybrids: a quantitative correlation with the constrained region. Composites Part A Appl Sci Manuf, 86, 19 (2016). https://doi.org/10.1016/j.compositesa.2016.03.029.
  10. Song S, Zhang Y. Carbon nanotube/reduced graphene oxide hybrid for simultaneously enhancing the thermal conductivity and mechanical properties of styrene-butadiene rubber. Carbon, 123, 158 (2017). https://doi.org/10.1016/j.carbon.2017.07.057.
  11. Lin Y, Chen Y, Zeng Z, Zhu J, Wei Y, Li F, Liu L. Effect of ZnO nanoparticles doped graphene on static and dynamic mechanical properties of natural rubber composites. Composites Part A Appl Sci Manuf, 70, 35 (2015). https://doi.org/10.1016/j.compositesa. 2014.12.008.
  12. Varghese TV, Kumar HA, Anitha S, Ratheesh S, Rajeev RS, Rao VL. Reinforcement of acrylonitrile butadiene rubber using pristine few layer graphene and its hybrid fillers. Carbon, 61, 476 (2013). https://doi.org/10.1016/j.carbon.2013.04.104.
  13. Mondal S, Khastgir D. Elastomer reinforcement by graphene nanoplatelets and synergistic improvements of electrical and mechanical properties of composites by hybrid nano fillers of graphene carbon black & graphene-MWCNT. Composites Part A Appl Sci Manuf, 102, 154 (2017). https://doi.org/10.1016/j.compositesa.2017.08.003.
  14. Yan L, Zheng YB, Zhao F, Li S, Gao X, Xu B, Weiss PS, Zhao Y. Chemistry and physics of a single atomic layer: strategies and challenges for functionalization of graphene and graphene-based materials. Chem Soc Rev, 41, 97 (2012). https://doi.org/10.1039/C1CS15193B.
  15. Wang R, Zhang J, Kang H, Zhang L. Design, preparation and properties of bio-based elastomer composites aiming at engineering applications. Compos Sci Technol, 133, 136 (2016). https://doi.org/10.1016/j.compscitech.2016.07.019.
  16. Manocha LM, Warrier A, Manocha S, Banerji S, Sathiyamoorthy D. Mechanical properties of carbon/carbon composites densified by HIP technique. Carbon Lett, 6, 6 (2005). http://carbonlett.org/PublishedPaper/topic_abstract.asp?idx=171.
  17. Zhang Y, Ge X, Li MC, Deng F, Oh J, Cho UR. The properties of rice bran carbon/nitrile-butadiene rubber composites fabricated by latex compounding method. Polym Compos, 39, E687 (2016). https://doi.org/10.1002/pc.24126.
  18. Li MC, Zhang Y, Cho UR. Mechanical, thermal and friction properties of rice bran carbon/nitrile rubber composites: Influence of particle size and loading. Mater Des, 63, 565 (2014). https://doi.org/10.1016/j.matdes.2014.06.032.
  19. Yin C, Zhang Q, Gong D. Preparation and properties of silica/styrene butadiene rubber masterbatches by latex co-coagulating technology. Polym Compos, 35, 22770 (2013). https://doi.org/10.1002/pc.22770.
  20. Wang L, Zhao S. Study on the structure-mechanical properties relationship and antistatic characteristics of SSBR composites filled with $SiO_2$/CB. J Appl Polym Sci, 118, 338 (2010). https://doi.org/10.1002/app.32372.
  21. D'Agostino A, Errico ME, Malinconico M, Rosa MD, Avella M, Schiraldi C. Development of nanocomposite based on hydroxyethylmethacrylate and functionalized fumed silica: mechanical, chemico-physical and biological characterization. J Mater Sci, 22, 481 (2011). https://doi.org/10.1007/s10856-010-4223-1.
  22. Mooney M. A theory of large elastic deformation. J Appl Phys, 11, 582 (1940). https://doi.org/10.1063/1.1712836.
  23. Zhang Y, Fei D, Xin G, Cho UR. Surface modification of novel rice bran carbon functionalized with (3-mercaptopropyl) trimethoxysilane and its influence on the properties of styrene-butadiene rubber composites. J Compos Mater, 50, 2987 (2016). https://doi.org/10.1177/0021998315615202.
  24. Wang Z, Liu J, Wu S, Wang W, Zhang L. Novel percolation phenomena and mechanism of strengthening elastomers by nanofillers. Phys Chem Chem Phys, 12, 3014 (2010). https://doi.org/10.1039/B919789C.
  25. Zhang Y, Ge X, Deng F, Li MC, Cho UR. Fabrication and characterization of rice bran carbon/styrene butadiene rubber composites fabricated by latex compounding method. Polym Compos, 38, 2594 (2015). https://doi.org/10.1002/pc.23852.
  26. Payne AR, Whittaker RE, Smith JF. Effect of vulcanization on the low-strain dynamic properties of filled rubbers. J Appl Polym Sci, 16, 1191 (1972). https://doi.org/10.1002/app.1972.070160513.
  27. Wang L, Ning N, Zhang L, Lu Y, Tian M, Chan T. Filler dispersion evolution of acrylonitrile-butadiene rubber/graphite nanocomposites during processing. Composites Part A Appl Sci Manuf, 47, 135 (2013). https://doi.org/10.1016/j.compositesa.2012.12.004.
  28. Choi SS. Improvement of properties of silica-filled natural rubber compounds using polychloroprene. J Appl Polym Sci, 83, 2609 (2002). https://doi.org/10.1002/app.10201.
  29. Choi SS, Park BH, Song H. Influence of filler type and content on properties of styrene-butadiene rubber (SBR) compound rein forced with carbon black or silica. Polym Adv Technol, 15, 122 (2004). https://doi.org/10.1002/pat.421.
  30. Lee SM, Kang DS, Roh JS. Bulk graphite: materials and manufacturing process. Carbon Lett, 16, 135 (2015). https://doi.org/10.5714/CL.2015.16.3.135.