DOI QR코드

DOI QR Code

Magnetic Field Calculation and Multi-objective Optimization of Axial Flux Permanent Magnet Generator with Coreless Stator Windings

  • Zhu, Jun (School of Electrical Engineering and Automation, Henan Polytechnic University) ;
  • Li, Shaolong (School of Electrical Engineering and Automation, Henan Polytechnic University) ;
  • Song, Dandan (School of Electrical Engineering and Automation, Henan Polytechnic University) ;
  • Han, Qiaoli (School of Energy and Transportation Engineering, Inner Mongolia Agricultural University) ;
  • Li, guanghua (School of Electrical Engineering and Automation, Henan Polytechnic University)
  • 투고 : 2017.10.18
  • 심사 : 2018.02.26
  • 발행 : 2018.07.01

초록

For the problem that the complexity of 3-D modeling and multi parameter optimization, as well as the uncertainty of the winding factor of axial flux permanent magnet generator with coreless windings. The complex 3-D model was simplified into 2-D analytic model, and an analytical formula for the winding factor that adapting different coreless stator winding is proposed in this paper. The analytical solution for air-gap magnetic fields, no-load back EMF, electromagnetic torque, and efficiency are calculated by using this method. The multiple objective and multivariable optimization of the maximum fundamental and the minimum harmonic content of back EMF are performed by using response surface methodology. The proposed optimum design method was applied to make a generator. The generator was tested and the calculated results are compared with the proposed method, which show good agreements.

키워드

참고문헌

  1. M. Chirca, S. Breban, C. Oprea and M. M. Radulescu, "Design Analysis of a Novel Double-Sided Axial- Flux Permanent-Magnet Generator for Micro-Wind Power Applications," 2014 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM), Bran, pp. 472-476, 2014.
  2. Gieras J F, Wang R J, Kamper M. "Axial Flux Permanent Magnet Brushless Machines," [M]. New Yoke: Springer Verlag, pp. 29-34, 2008.
  3. Min-Fu Hsieh and Yu-Sheng Hsu, "An Investigation on Influence of Magnet Arc Shaping Upon Back Electromotive Force Waveforms for Design of Permanent-Magnet Brushless Motors," in IEEE Transactions on Magnetics, vol. 41, no. 10, pp. 3949- 3951, Oct. 2005. https://doi.org/10.1109/TMAG.2005.854975
  4. T. F. Chan and L. L. Lai, "An Axial-Flux Permanent- Magnet Synchronous Generator for a Direct-Coupled Wind-Turbine System," in IEEE Transactions on Energy Conversion, vol. 22, no. 1, pp. 86-94, March 2007. https://doi.org/10.1109/TEC.2006.889546
  5. Rong-Jie Wang, M. J. Kamper, K. Van der Westhuizen and J. F. Gieras, "Optimal Design of a Coreless Stator Axial Flux Permanent-Magnet Generator," in IEEE Transactions on Magnetics, vol. 41, no. 1, pp. 55-64, Jan. 2005. https://doi.org/10.1109/TMAG.2004.840183
  6. J. Cros and P. Viarouge, "Synthesis of High Perfor- mance PM Motors With Concentrated Windings," in IEEE Transactions on Energy Conversion, vol. 17, no. 2, pp. 248-253, Jun 2002. https://doi.org/10.1109/TEC.2002.1009476
  7. M. J. Kamper, R. J. Wang and F. G. Rossouw, "Analysis and Performance of Axial Flux Permanent- Magnet Machine with Air-Cored Nonoverlapping Concentrated Stator Windings," in IEEE Transactions on Industry Applications, vol. 44, no. 5, pp. 1495- 1504, Sept.-Oct. 2008. https://doi.org/10.1109/TIA.2008.2002183
  8. A. Hassanpour Isfahani, "Analytical Framework for Thrust Enhancement in Permanent-Magnet (PM) Linear Synchronous Motors With Segmented PM Poles," in IEEE Transactions on Magnetics, vol. 46, no. 4, pp. 1116-1122, April 2010. https://doi.org/10.1109/TMAG.2009.2036993
  9. N. Roshandel Tavana and A. Shoulaie, "Analysis and Design of Magnetic Pole Shape in Linear Permanent- Magnet Machine," in IEEE Transactions on Magnetics, vol. 46, no. 4, pp. 1000-1006, April 2010. https://doi.org/10.1109/TMAG.2009.2037951
  10. Song jianqiao. "Design and Research on Permanent Magnet Generator with Rotor and Fractional-Slot Concentrated Winding," [D] Harbin University of Science and Technology, 2013.
  11. Ren Yanping. "Design and Research on Permanent Magnet Generator with Circumferential Double-Layer and Fractional-slot Concentrated Winding," [D] Harbin University of Science and Technology, 2012.
  12. Xia Bing. "Study of Disc Type Permanent Magnet Machine for Small Vertical Axis Wind Power Application," [D]. Hangzhou: Zhejiang University, 2010.
  13. A. Mohammadpour, A. Gandhi and L. Parsa, "Winding Factor Calculation for Analysis of Back EMF Waveform in Air-Core Permanent Magnet Linear Synchronous Motors," in IET Electric Power Applications, vol. 6, no. 5, pp. 253-259, May 2012. https://doi.org/10.1049/iet-epa.2011.0292
  14. R. J. Hill-Cottingham, P. C. Coles, J. F. Eastham, F. Profumo, A. Tenconi and G. Gianolio, "Multi-Disc Axial Flux Stratospheric Aircraft Propeller Drive," Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248), Chicago, IL, USA, pp. 1634- 1639 vol.3, 2001.
  15. J. Y. Choi, S. H. Lee, K. J. Ko and S. M. Jang, "Improved Analytical Model for Electromagnetic Analysis of Axial Flux Machines With Double-Sided Permanent Magnet Rotor and Coreless Stator Windings," in IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 2760-2763, Oct. 2011. https://doi.org/10.1109/TMAG.2011.2151840
  16. Gyu-Hong Kang, Jung-Pyo Hong and Gyu-Tak Kim, "A Novel Design of an Air-core Type Permanent Magnet Linear Brushless Motor By Space Harmonics Field Analysis," in IEEE Transactions on Magnetics, vol. 37, no. 5, pp. 3732-3736, Sept. 2001. https://doi.org/10.1109/20.952701
  17. M. Aydin and M. Gulec, "A New Coreless Axial Flux Interior Permanent Magnet Synchronous Motor With Sinusoidal Rotor Segments," in IEEE Transactions on Magnetics, vol. 52, no. 7, pp. 1-4, July 2016.
  18. Wang Mingjie, Cheng Zhiping, Jiao Liucheng. "Analysis on the Sinusoidal Magnetic Field of Slotless PMLSM Using Modular Poles," [J]. Electric Machines and Control, vol. 19, no. 4, pp. 34-39, 2015.
  19. Y. Shen and Z. Q. Zhu, "Investigation of Permanent Magnet Brushless Machines Having Unequal-Magnet Height Pole," in IEEE Transactions on Magnetics, vol. 48, no. 12, pp. 4815-4830, Dec. 2012. https://doi.org/10.1109/TMAG.2012.2202398
  20. M. Markovic and Y. Perriard, "Optimization Design of a Segmented Halbach Permanent-Magnet Motor Using an Analytical Model," in IEEE Transactions on Magnetics, vol. 45, no. 7, pp. 2955-2960, July 2009. https://doi.org/10.1109/TMAG.2009.2015571