DOI QR코드

DOI QR Code

연결보에 감쇠장치를 적용한 전단벽식 구조물의 거동특성

Behaviour of Shear Wall Structures with Energy Dissipation Device in Coupling Beam

  • 투고 : 2017.11.30
  • 심사 : 2018.04.30
  • 발행 : 2018.05.01

초록

국내 공동주택 전단벽 구조시스템에 적용되는 감쇠장치는 대부분 인방형 형상으로 적용되고 있다. 인방형 감쇠장치는 좌우 전단벽을 연결하여 커플링 효과 및 추가 감쇠효과를 발휘하여 구조물 내진성능을 증대시킨다. 본 연구에서는 인방형 감쇠장치를 소개하고 감쇠장치가 적용된 구조물의 거동특성을 파악하였다. 제안된 감쇠장치는 힌지 및 변단면 형상으로 감쇠효과를 극대화시킨 구조로 유한요소 해석결과와 실험결과가 잘 일치하여 우수한 내진성능을 발휘하는 것으로 나타났으며, 해당 감쇠장치가 적용된 2차원 및 실제 공동주택 구조물을 대상으로 감쇠효과를 검토한 결과, 감쇠장치 커플링 효과로 기존구조물 대비 모든 구조물에서 내진성능 향상을 도모할 수 있었다. 본 연구에서 검토한 실제 구조물에 대해서는 비선형 정적해석 결과, 강도 및 연성능력이 향상되는 것으로 나타났고, 비선형 동적해석 결과, 층간변형각이 15%~18%, 층가속도가 20%~28%, 밑면전단력이 15%~20% 감소하는 결과를 나타냈다.

Building structures of apartment in korea conventionally adopt shear walls using coupling beams as seismic force-resisting systems. Energy dissipating devices employed the building structures are used instead of the coupling beams in order to increase the seismic performances by providing additional damping and stiffness. This study aims to introduce energy dissipating devices which are preferred in structural system and aims to investigate structural behaviors of shear wall structures employing such devices instead of coupling beams. In order for achieve research objectives, Finite Element Analysis and Nonlinear analysis was carry out. Finite Element Analysis results was correspond with experimental results and this is indicated that the device can provide sufficient additional damping and stiffness into shear wall structures. Throughout nonlinear static analyses, examples structures with the devices can enhance seismic performance of building structures due to their sufficient energy dissipating capacities. Especially, strength and ductility capacities were significantly improved when it is compared with the performance of building structures without the devices. Throughout nonlinear dynamic analyses, it was observed that structural damages can be mitigated due to reduced seismic demands for seismic force-resisting systems. It is especially noted due to the fact that story drifts, accelerations, shear demands are reduced by 15~18%, 20~28% and 15~20%, respectively.

키워드

참고문헌

  1. JSSI(The Japan Society of Seismic Isolation) (2014), Design and Construction Manual of Passive Vibration Control Structure, 3 rd Edition.
  2. Han-Seon Lee, et al. (2010), Experimental Study on the Similitude of Small-Scale Models in Cyclic Lateral Behaviors of RC Shear Wall Subassemblages. Journal of Korea Concrete Institute, 22(6), 805-816. https://doi.org/10.4334/JKCI.2010.22.6.805
  3. Yun, Hyun-Do, et al. (2004), Behavior Characteristics of Coupled Shear Wall on Effects of Coupling Beam Details. Journal of Architectural Institute of korea, AIK, 20(6), 19-26.
  4. Ahn TS, Kim YJ, Park JW, et al. (2012), Experimental study on a cantilever type metallic damper for seismic retrofit of building structures. Journal of Korean Society of Steel Construction, 24(2), 149-161. https://doi.org/10.7781/kjoss.2012.24.2.149
  5. ABAQUS/CAE User's Manual, ABAQUS Version 6.5.
  6. Architectural Institute of Korea (AIK). (2016), Korean Building Code and Commentary (KBC 2016). Seoul, Korea.
  7. Computers and Structures, Inc. (2006), PERFORM Components and Elements for PERFORM 3D and PERFORM-Collaspse Ver 5, CSI, Berkerley, CA.
  8. Federal Emergency Management Agency. (2005), Improvement of Nonlinear Static Seismic Analysis Procedure (FEMA 440).