한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)

  • 제29권7호
  • /
  • Pages.491-499
  • /
  • 2018
  • /
  • 1226-3133(pISSN)
  • /
  • 2288-226X(eISSN)
한국전자파학회 (The Korean Institute of Electromagnetic Engineering and Science)
권호 표지
DOI QR코드

DOI QR Code

잡음지수분석기의 새로운 교정방법과 잡음상관행렬 측정

Novel Calibration Method of Noise Figure Analyzer and Measurement of Noise Correlation Matrix

  • Lee, Dong-Hyun (Department of Radio Science & Engineering, Chungnam University) ;
  • Yeom, Kyung-Whan (Department of Radio Science & Engineering, Chungnam University)
  • 투고 : 2018.03.22
  • 심사 : 2018.06.08
  • 발행 : 2018.07.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

잡음지수분석기의 일반적인 교정방법은 잡음전원을 이용하는 방법이다. 이 방법은 교정 시 잡음전원과 잡음지수분석기의 부정합을 고려하지 않기 때문에 측정결과에서 심각한 불규칙 리플을 동반한다. 본 논문에서는 잡음전원과 잡음지수분석기의 부정합을 모두 고려한 새로운 잡음지수분석기의 교정 및 이를 이용한 새로운 잡음상관행렬 측정방법을 제안한다. 제안하는 방법은 uncorrected 잡음전력을 이용, 교정하지 않은 잡음지수분석기의 이득과 잡음상관행렬을 결정하였다. 그리고 결정된 이득과 잡음상관행렬을 이용, DUT에 대한 잡음상관행렬 측정결과에서 잡음지수분석기의 영향을 교정하였다. 제안된 방법을 통해, 측정된 DUT의 잡음파라미터는 상대적인 잡음비를 이용한 측정 결과와 같은 정도의 불규칙 리플을 보였다.

The conventional calibration method for a noise figure analyzer is to use a noise source. This method is accompanied by a significant irregular ripple in the measurement results, because it does not consider the mismatch of the noise source and noise figure analyzer during calibration. A novel calibration method of the noise figure analyzer is proposed that considers the mismatch between the noise power and noise figure analyzer. A novel noise correlation matrix measurement technique using this method is also proposed. The method determines the noise correlation matrix and the gain of the uncorrected noise figure analyzer using uncorrected noise powers. Then, having determined the gain and noise correlation matrix, the effects of noise figure analyzers were corrected in the measurement results of the noise correlation matrix for the device under test (DUT). Through the proposed method, the measured noise parameters of a DUT showed the same degree of irregular ripples as the result of using the relative noise ratio.

키워드

참고문헌

  1. IRE Subcommittee on Noise, "IRE standards on methods of measuring noise in linear two ports 1959," in Proceedings of the IRE, Jan. 1960, vol. 48, pp. 60-68.
  2. H. Rothe, W. Dahlke, "Theory of noisy four poles," in Proceedings of the IRE, Jun. 1956, vol. 44, no. 6, pp. 811-818.
  3. P. Penfield, "Wave representation of amplifier noise," IRE Transactions Circuit Theory, vol. 9, no. 1, pp. 84-86, Mar. 1962. https://doi.org/10.1109/TCT.1962.1086866
  4. G. F. Engen, "A new method of characterizing amplifier noise performance," IEEE Transactions on Instrumentation and Measurement, vol. 19, no. 4, pp. 344-349, Nov. 1970. https://doi.org/10.1109/TIM.1970.4313925
  5. S. W. Wedge, "Computer-aided design of low noise microwave circuits," Ph.D. dissertation, California Institute of Technology, 1991.
  6. S. W. Wedge, D. B. Rutledge, "Wave techniques for noise modeling and measurement," IEEE Transactions on Microwave Theory and Techniques, vol. 40, no. 11, pp. 2004-2012, Nov. 1992. https://doi.org/10.1109/22.168757
  7. A. R. Ahmed, K. W. Yeom, "An extraction of two-port noise parameters from measured noise powers using an extended six-port network," IEEE Transaction on Microwave Theory and Techniques, vol. 62, no. 10, pp. 2423-2434, Oct. 2014. https://doi.org/10.1109/TMTT.2014.2345693
  8. 염경환, 압둘-라흐만, "6-포트 회로망을 이용한 잡음 파라미터 측정," 한국전자파학회논문지, 26(2), pp. 119-126, 2015년 2월. https://doi.org/10.5515/KJKIEES.2015.26.2.119
  9. 이동현, 압둘-라흐만, 이성우, 염경환, "8-포트 회로망을 이용한 온-웨이퍼형 DUT의 잡음 파라미터 측정," 한국전자파학회논문지, 25(8), pp. 808-820, 2014년 8월. https://doi.org/10.5515/KJKIEES.2014.25.8.808
  10. 이동현, 염경환, "스펙트럼 분석기를 이용한 2가지 잡음 파라미터 측정방법과 비교," 한국전자파학회논문지, 26(12), pp. 1072-1082, 2015년 12월. https://doi.org/10.5515/KJKIEES.2015.26.12.1072
  11. 이동현, 염경환, "상대적인 잡음비를 이용한 잡음상 관행렬 측정방법," 한국전자파학회논문지, 27(5), pp. 430-437, 2016년 5월. https://doi.org/10.5515/KJKIEES.2016.27.5.430
  12. V. Adamian, A. Uhlir, Jr., "Simplified noise evaluation of microwave receivers," IEEE Transactions on Instrumentation and Measurement, vol. 33, no. 2, pp. 136-140, Jun. 1984. https://doi.org/10.1109/TIM.1984.4315180
  13. D. Pasquet, E. Bourdel, S. Quintanel, T. Ravalet, and P. Houssin, "New method for noise-parameter measurement of a mismatched linear two-port using noise power wave formalism," IEEE Transactions on Microwave Theory and Techniques, vol. 56, no. 9, pp. 2136-2142, Sep. 2008. https://doi.org/10.1109/TMTT.2008.2002235
  14. Keysight Technologies, SNS Series Noise Sources, Data Sheet. Available: http://www.keysight.com.
  15. Keysight Technologies, NFA Series Noise Figure Analyzers, Data Sheet. Available: http://www.keysight.com.
  16. Keysight Technol., "Noise figure measurement accuracy-the Y-factor method, application note." Available: http://www.keysight.com.
  17. H. Bosma, "On the theory of linear noisy systems," Philips Research Reports, Supplements, no. 10, 1967.
  18. S. W. Wedge, D. B. Rutledge, "Noise waves and passive linear multiports," IEEE Microwave Guided Wave Letters, vol. 1, no. 5, pp. 117-119, May 1991. https://doi.org/10.1109/75.89082
  19. K. W. Yeom, Microwwave Circuit Design: A Practical Approach Using ADS, Prentice Hall, 2015.
  20. AST54S, Low Noise Amplifier, ASB. Available: http://www.asb.co.kr.
  21. M. Pospieszalski, "On the measurement of noise parameters of microwave two-ports(short paper)," IEEE Trans on Microwave Theory and Techniques, vol. 34, no. 4, pp. 456-458, Apr. 1986. https://doi.org/10.1109/TMTT.1986.1133369