초록
본 논문은 13.56 MHz 임피던스 자동 정합 시스템 내의 VI 센서를 이용하여 전압 신호와 전류 신호를 측정하고, 부하임피던스를 계산하는 새로운 알고리즘에 대해서 기술하였다. 기존의 $50{\Omega}$ 교정 부하로 하던 방식에서 벗어나 임의의 복소수 교정 부하를 사용하여 에러율이 향상되는 알고리즘을 제안한다. 에러율은 $R_{IN}$ 평균 1 % 이하, $X_{IN}$은 평균 20 %이하 목표로 한다. 일차적으로 믹서를 사용하여 IF 주파수를 계산하여 에러율을 줄였고, 두 번째로 임의의 복소수 부하를 교정 부하로 사용하였을 때 에러율이 $R_{IN}$은 평균 2.7 %에서 평균 0.3 %로 감소하였고, $X_{IN}$은 평균 102 %에서 평균 18.3%까지 감소하였습니다.
This paper describes an algorithm for calculating load impedance by measuring voltage and current components using a VI sensor in a 13.56 MHz impedance automatic matching system. We propose an algorithm that improves the error rate by using an arbitrary complex calibration load instead of the conventional $50{\Omega}$ calibration load. The error rate is targeted to attain average values of $R_{IN}$ and $X_{IN}$ at 1% and 20% or less, respectively. First, the IF frequency is calculated using a mixer to reduce the error rate. Second, when the arbitrary complex load is used as the calibration load, the error rate $R_{IN}$ decreased from 4.7 % to 0.3 % on average, and $X_{IN}$ decreased from 102 % to 18.3 % on average.