전기전자학회논문지 (Journal of IKEEE)

  • 제22권2호
  • /
  • Pages.289-301
  • /
  • 2018
  • /
  • 1226-7244(pISSN)
  • /
  • 2288-243X(eISSN)
한국전기전자학회 (Institute of Korean Electrical and Electronics Engineers)
권호 표지
DOI QR코드

DOI QR Code

EtherCAT 통신방식을 응용한 IEEE 802.15.4 Ad-Hoc 무선 센서 네트워크 라우팅 방식

IEEE 802.15.4 Ad-Hoc Wireless Sensor Network Routing Method Applying EtherCAT Communication Method

  • Park, Jeong-Hyeon (Dept. of Electronic & Telecommunication Engineering, Inje University) ;
  • Seo, Chang-Jun (Dept. of Electronic & Telecommunication Engineering, Inje University)
  • 투고 : 2018.06.11
  • 심사 : 2018.06.28
  • 발행 : 2018.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

IoT 기술을 산업현장에 적용시킨 IIoT는 생산율 향상 및 작업자의 안전을 위한 모니터링의 기술로 이용되고 있다. 하지만 수십에서 수백 대의 공작기계가 부품을 가공하고 있는 생산라인에 Ethernet과 RS485 등을 유선 네트워크를 이용한 IIoT 네트워크의 구축을 통한 모니터링은 기반비용 및 네트워크의 유연성 및 유동성의 문제를 가진다. 이로 인해 유선 네트워크에서 무선 네트워크로의 변화가 필요한 실정이다. 따라서 본 논문에서는 IEEE 802.15.4 표준 무선네트워크 디바이스를 이용하여 생산라인에 Ad-Hoc WSN를 구축한다. 또한 추가적으로 Payload Frame을 모든 센서노드가 공유하는 특징을 가지는 EtherCAT 통신방식을 이용하여 센서노드의 전송주기 및 순서를 설정하였다. 이를 통해 무선 센서 네트워크의 패킷충돌로 인한 신뢰성 저하와 실시간성 문제를 해결했으며 실제 산업현장에 사용할 수 있는 무선 네트워크 라우팅 방식을 확인하였다.

IIoT, the IoT technology applied to the industrial field, is being used as a monitoring technology for increasing in production rate and safety of workers. However, monitoring through the construction of IIoT network using Ethernet and RS485 in production lines where dozens to hundreds of machine tools are manufacturing components, have difficulties of infrastructure cost and network flexibility and fluidity. Therefore, in this paper, using IEEE 802.15.4 standard WSN device to construct a Ad-Hoc WSN in the production line. In addition, the transmission period and order of the sensor nodes are set by applying the EtherCAT communication method in which the payload frames are shared by all the sensor nodes. From this, we have overcome the problem of reliability decline and real-time issue due to the packet collision of wireless network and confirmed that it is a wireless network routing method that can be used in the actual industrial field.

키워드

참고문헌

  1. J.H. Jeon, J.S. Cheol, "Efficient Packet Transmission Mechanism for Multi-hop Wireless Sensor Networks," j.inst.Korea Multimedia Society, vol. 18, no. 4, pp. 492-498, 2015. DOI : 10.9717/kmms.2015.18.4.492
  2. H.Y. Kim, S.C. Kim, J.H. Jeon et al, "Traffic Adaptive Wakeup Control Mechanism in Wireless Sensor Networks," j.inst.Korea multimedia society, vol. 17, no. 6, pp. 681-686, 2014. DOI : 10.9717/kmms.2014.17.6.681
  3. H. Y. Kim, S. C. Kim, J.H. Jeon et al, "Industrial Internet of Things Market Forecast and Technology Trend," j. inst. Korea multimedia society, vol. 17, no. 6, pp. 681-686, 2014. https://doi.org/10.9717/kmms.2014.17.6.681
  4. Dictionary of Defense Scientific and Technical Terms, Defense Agency of Technology and Quality, 2011.
  5. S.Y. NI, Y.C. Tseng, Y.S. Chen, et al, "The Broadcast Stoem problem in a mobile ad hoc network," in Proc. of the 1999 Fifth Annual ACM/IEEE International Conference on Mobile Computing and Networking, 2002, pp. 151-162. DOI:10.1145/313451.313525
  6. IEEE, Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) specification for Low-Rate Wireless Personal Area Networks (WPANs), IEEE std 802.15.4a, 2007.
  7. S.H. Han, C.S. No, S.J. Park, "Ubiquitous-based Information Technology and Wireless Network Technology Trend," j.inst.Korean society of machine tool engineers, vol. 14, bo. 2, pp. 27-33 2005.
  8. N.l. Kim, Y.S. Hwang, E,B, Kim, "Enhanced CSMA/CA Protocol for multi-hop wireless Ad-hoc networks," j.inst.Institute of electronics engineers of korea, vol. 26 no. 2, pp. 231-234, 2003.
  9. K.W. Kim, S.H. Bae, D.I. Kim, "An Improved Message Broadcast Scheme over Wireless Sensor Networks," "j.inst.Korean Institute of Communications and Information Sciences," Vol. 5, No. 6, pp. 588-594, 2010.
  10. S.Y. Choi, J.S. Kim, K.Y. Jung, et al. "Dynamic Single Path Routing Mechanism for Reliability and Energy-Efficiency in a Multi Hop Sensor Network," j.inst.Korea contents association, vol. 9, no. 9, pp. 31-40, 2009. DOI: 10.5392/JKCA.2009.9.9.031
  11. G.C. Wang, T.Y. Kim, G.H. Cho, "An Efficient Flooding Scheme using Clusters in Mobile Ad-Hoc Networks," j.inst. KISS : Information Networking, vol. 32, no. 6, pp. 696-705, 2005.
  12. C. Jaegal and C.W. Lee, "An Efficient Flooding Algorithm for Position-based Wireless Ad hoc Networks," j.inst.Electronics engineers of korea - telecommunications, vol. 45, no. 10, pp. 17-28, 2008. DOI: 10.1109/ICCIT.2008.220
  13. C.J. An, H.C. Yi, H.W. Kim et al. "Improving Packet Loss Rate of EtherCAT Master Dependent on Hardware Performance," j.inst.Korean institute of information technology, vol. 13, no. 4, pp. 77-83, 2015. DOI :10.14801/jkiit.2015.13.4.77
  14. D.G. Kim, Y.H. Jo, D.I Lee, "Analysis of Transmission Delay and Fault Recovery Performance with EtherCAT for In-Vehicle Network," The Journal of Korean Institute of Communications and Information Sciences, vol. 37, no. 11, pp. 1036-1044, 2012. DOI : 10.7840/kics.2012.37C.11.1036

피인용 문헌

  1. 생산라인에 적용을 위한 무선 센서 네트워크 라우팅방식 및 고장노드 검출에 대한 연구 vol.22, pp.4, 2018, https://doi.org/10.7471/ikeee.2018.22.4.1104