Journal of the Computational Structural Engineering Institute of Korea (한국전산구조공학회논문집)

Computational Structural Engineering Institute of Korea (한국전산구조공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Crack Propagation Along a Sinusoidal Interface using Cohesive Zone Models

응집 영역 모델을 이용한 굴곡 계면을 따르는 균열 진전 거동에 관한 연구

  • Lee, Hyeon-Gyeong (Department of Mechanical and Automotive Engineering, Seoul National University of Science and Technology) ;
  • Kim, Hyun-Gyu (Department of Mechanical and Automotive Engineering, Seoul National University of Science and Technology)
  • 이현경 (서울과학기술대학교 기계자동차공학과) ;
  • 김현규 (서울과학기술대학교 기계자동차공학과)
  • Received : 2018.02.05
  • Accepted : 2018.06.11
  • Published : 2018.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, finite element analyses of crack propagation along a sinusoidal interface are performed by using cohesive elements. BK law is used for cohesive zone to consider mixed mode traction-separation relation at the crack tip on a sinusoidal interface of a double cantilever beam specimen. The shape of a sinusoidal interface crack and the cohesive strength and the cohesive energies in mixed mode cohesive laws are varied in numerical experiments, and load-displacement curves at the ends of a double cantilever beam specimen are obtained to investigate the crack propagation behavior along a sinusoidal interface.

본 연구에서는 굴곡 계면을 따른 균열 진전을 응집 요소를 사용하여 유한요소 해석을 수행하였고 균열 선단에서 복합 모드 하중을 고려하기 위하여 BK 법칙을 적용하였다. 정현파 굴곡 계면을 갖는 이중 외팔보에 하중을 부여하고 복합 모드 응집 법칙에서 응집 강도와 응집 에너지에 따른 하중-변위 선도의 변화를 알아보았다. 응집 강도가 커지면 응집 영역 크기가 상대적으로 작아지고 균열 진전에 따른 하중-변위 선도에 굴곡이 나타나는 것을 보여 주었으며 인장과 전단 응집에너지 비율에 따라 하중의 증가와 하중-변위 선도에 굴곡이 나타나는 것을 보여주었다. 또한 굴곡 계면의 형상에 따른 균열 진전 거동의 영향을 분석하였는데 균열의 형상비가 커지면 균열 진전을 위한 더 큰 균열 분리 에너지가 요구되는 것을 보여 주었다. 굴곡 계면의 형상과 응집 법칙을 변화시켜 파괴 인성을 크게 향상시킬 수 있으며 균열 진전 거동을 변화시킬 수 있게 된다.

Keywords

References

  1. Alfano, M., Lubineau, G., Paulino, G.H. (2012) Study on the Role of Laser Surface Irradiation on Damage and Decohesion of Al/epoxy Joints, Int. J. Adhesion & Adhesives, 39, pp.33-41. https://doi.org/10.1016/j.ijadhadh.2012.03.002
  2. Ballaribi, R., Plesha M.E. (1987) The Effects of Crack Surface Friction and Roughness on Crack Tip Stress Fields, Int. J. Fracture, 34(3), pp.195-207. https://doi.org/10.1007/BF00019717
  3. Benzeggagh, M.L., Kenane, M. (1996) Measurement of Mixed-mode Delamination Fracture Toughness of Unidirectional Glass/Epoxy Composites with Mixed-Mode Bending Apparatus, Compos. Sci. Tech., 56(4), pp.439-449. https://doi.org/10.1016/0266-3538(96)00005-X
  4. Carlson, B.E. (2016) Mode I Fracture Along Adhesively Bonded Sinusoidal Interfaces, Int. J. Solids Struct., 83, pp.45-64. https://doi.org/10.1016/j.ijsolstr.2015.12.028
  5. Chan, E.P., Smith, E.J. (2008) Surface Wrinkles for Smart Adhesion, Adv. Mater., 20, pp.711-716. https://doi.org/10.1002/adma.200701530
  6. Cordisco, F.A., Zavattieri, P.D., Hector, L.G., Bower, A.F. (2012) Toughness of a Patterned Interface between Two Elastically Dissimilar Solids, Eng. Fracture Mech., 96, pp.192-208. https://doi.org/10.1016/j.engfracmech.2012.07.018
  7. Cordisco, F.A., Zavattieri, P.D., Hector, L.G., Bower, A.F. (2014) On the Mechanics of Sinusoidal Interfaces between Dissimilar Elastic-Plastic Solids Subject to Dominant Mode I, Eng. Fracture Mech., 131, pp.38-57. https://doi.org/10.1016/j.engfracmech.2014.06.004
  8. Dugdale, D.S. (1960) Yielding of Stress Sheets Containing Slits, J. Mech. Phys. Solids, 8, pp.100-104. https://doi.org/10.1016/0022-5096(60)90013-2
  9. Harper, P.W., Sun, L., Hallett, S.R. (2012) A Study on the Influence of Cohesive Zone Interface Element Strength Parameters on Mixed Mode Behaviour, Composites Part A: Appl. Sci. Manufacture., 43(4), pp.722-734. https://doi.org/10.1016/j.compositesa.2011.12.016
  10. Kim, W.S., Yun, I.H., Lee, J.J., Jung, H.T. (2010) Evaluation of Mechanical Interlock Effect on Adhesion Strength of Polymer-Metal Interfaces using Micro-Patterned Surface Topography, Int. J. Adhesion & Adhesives, 30, pp.408-417. https://doi.org/10.1016/j.ijadhadh.2010.05.004
  11. Oh, T.S., Rodel, J., Cannon, M., Ritchie, R.O. (1988) Ceramic/metal Interfacial Crack Growth: Toughening by Controlled Microcracks and Interfacial Geometries, Acta Mater., 36, pp.2083-2093. https://doi.org/10.1016/0001-6160(88)90310-0
  12. Seo, H.S., Baek, H.C., Kim, H.G. (2014) A Study on the Effect of Cohesive Laws on Finite Element Analysis of Crack Propagation Using Cohesive Elements, Korean Soc. Mech. Eng., 38(4), pp.401-407. https://doi.org/10.3795/KSME-A.2014.38.4.401
  13. Zavattieri, P.D., Hector J., L.G., Bower, A.F. (2007) Determination of the Effective Mode-I toughness of a Sinusoidal Interface between Two Elastic Solids, Int. J. Fracture, 145(3), pp.167-180. https://doi.org/10.1007/s10704-007-9109-y