DOI QR코드

DOI QR Code

Uni-axial behavior of energy dissipative steel cushions

  • Ozkaynak, Hasan (Beykent University, Department of Civil Engineering) ;
  • Khajehdehi, Arastoo (Istanbul Technical University, Institute for Science and Technology) ;
  • Gullu, Ahmet (Istanbul Technical University, Institute for Science and Technology) ;
  • Azizisales, Faraz (Istanbul Technical University, Institute for Science and Technology) ;
  • Yuksel, Ercan (Istanbul Technical University, Faculty of Civil Engineering) ;
  • Karadogan, Faruk (Isik University, Department of Civil Engineering)
  • 투고 : 2016.07.11
  • 심사 : 2018.05.10
  • 발행 : 2018.06.25

초록

Seismic excitations may impart a significant amount of energy into structures. Modern structural design attitudes tend to absorb some part of this energy through special dissipaters instead of heavy plastic deformations on the structural members. Different types of dissipater have been generated and utilized in various types of structures in last few decades. The expected earthquake damage is mainly concentrated on these devices and they may be replaced after earthquakes. In this study, a low-cost device called energy dissipative steel cushion (EDSC) made of flat mild steel was developed and tested in the Structural and Earthquake Engineering Laboratory (STEELab) of Istanbul Technical University (ITU). The monotonic and cyclic tests of EDSC were performed in transversal and longitudinal directions discretely. Very large deformation capability and stable hysteretic behavior are some response properties observed from the tests. Load vs. displacement relations, hysteretic energy dissipation properties as well as the closed form equations to predict the behavior parameters are presented in this paper.

키워드

참고문헌

  1. Bergman, D.M. and Goel, S.C. (1987), "Evaluation of cyclic testing of steel plate devices for added damping and stiffness", UMCE87-10, Ann Arbor, University of Michigan, IL, USA.
  2. Black, C.J., Makris, N. and Aiken, I.D. (2004), "Component testing, seismic evaluation and characterization of bucklingrestrained braces", ASCE J. Struct. Eng., 130(6), 880-894. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:6(880)
  3. Chan, R.W. and Albermani, F. (2008), "Experimental study of steel slit damper for passive energy dissipation", Eng. Struct., 30(4), 1058-1066. https://doi.org/10.1016/j.engstruct.2007.07.005
  4. Chan, R.W., Albermani, F. and William, M.S. (2009), "Evaluation of yielding shear panel device for passive energy dissipation", J. Constr. Steel Res., 65(2), 260-268. https://doi.org/10.1016/j.jcsr.2008.03.017
  5. Chopra, A.K. (1995), Dynamics of Structures: Theory and Applications to Earthquake Engineering, Prentice Hall, Englewood Cliffs, NJ, USA.
  6. Dal Lago, B., Biondini, F. and Toniolo, G. (2017a), "Experimental investigation on steel W-shaped folded plate dissipative connectors for horizontal precast concrete cladding panels", J. Earthq. Eng., 22(5), 778-800. DOI: 10.1080/13632469.2016.1264333
  7. Dal Lago, B., Biondini, F. and Toniolo, G. (2017b), "Friction-based dissipative devices for precast concrete panels", Eng. Struct., 147, 356-371. https://doi.org/10.1016/j.engstruct.2017.05.050
  8. Dal Lago, B., Biondini, F., Toniolo, G. and Tornaghi, M.L. (2017c), "Experimental investigation on the influence of silicone sealant on the seismic behaviour of precast facades", Bull. Earthq. Eng., 15(4), 1771-1787. https://doi.org/10.1007/s10518-016-0045-y
  9. FEMA-461 (2007), Interim testing protocols for determining the seismic performance characteristics of structural and nonstructural components; Federal Emergency Management Agency, Washington, DC, USA.
  10. Gang, L. and Hongnan, N.L. (2013), "Experimental study and application in steel structure of dual functions metallic damper", ASCE J. Struct. Eng., 9(3), 247-258.
  11. Gray, M.G., Christopoulos, C. and Packer, J.A. (2010), "Cast steel yielding fuse for concentrically braced frames", Proceedings of the 9th U.S. National and 10th Canadian Conference on Earthquake Engineering, Toronto, Canada, July.
  12. Gullu, A., Ozkaynak, H., Khajehdehi, A., Gokce, T., Azizisales, F., Bal, I.E., Smyrou, E., Yuksel, E. and Karadogan, F. (2015), "Derivation of the closed form equations for the energy dissipative steel cushions", Proceedings of the 14th World Conference on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures (14WCSI), San Diego, CA, USA, September.
  13. Gullu, A., Yuksel, E., Khajehdehi A., Karadogan, H.F. and Ozkaynak, H. (2016), "Experimental and analytical evaluation of the axial behaviour of energy dissipative steel cushions", Proceedings of 2016 NZSEE Conference, Christchurch, New Zeland, April. [Poster]
  14. Henry, R.S., Aaleti, S., Sritharan, S. and Ingham, J.M. (2009), "Concept and finite-element modeling of new steel shear connectors for self-centering wall systems", J. Eng. Mech., 136(2), 220-229.
  15. Karalis, A.A., Georgiadi-Stefanidi, K.A., Salonikios, T.N., Stylianidis, K.C. and Mistakidis, E.S. (2011), "Experimental and numerical study of the behavior of high dissipation metallic device for the strengthening of existing structures", Proceedings of COMPDYN 2011 III ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Corfu, Greece, May.
  16. Kelly, J.M., Skinner, R.I. and Heine, A.J. (1972), "Mechanisms of energy absorption in special devices for use in earthquake-resistant structures", Bull. New Zealand Nat. Soc. Earthq. Eng., 5(3), 63-88.
  17. Koetaka, Y., Chusilpb, P., Zhangc, Z., Andoa, M., Suitad, K., Inouea, K. and Unoe, N. (2005), "Mechanical property of beam-to-column moment connection with hysteretic dampers for column weak axis", Eng. Struct., 27, 109-117. https://doi.org/10.1016/j.engstruct.2004.09.002
  18. Maleki, S. and Bagheri, S. (2010), "Pipe damper, Part I: Experimental and analytical study", J. Constr. Steel Res., 66, 1088-1095. https://doi.org/10.1016/j.jcsr.2010.03.010
  19. Negro, P. and Tornaghi, M.L. (2017), "Seismic response of precast structures with vertical cladding panels: the SAFECLADDING experimental campaign", Eng. Struct., 132, 205-228. https://doi.org/10.1016/j.engstruct.2016.11.020
  20. Ozkaynak, H. (2017a), "Model proposal for steel cushions for use in Reinforced Concrete frames", KSCE J. Civil Eng., 21(7), 2717-2727. DOI: 10.1007/s12205-017-0477-1
  21. Ozkaynak, H. (2017b), "The effects of special metallic dampers on the seismic behavior of a vulnerable RC frame", Struct. Eng. Mech., Int. J., 61(4), 483-496. https://doi.org/10.12989/sem.2017.61.4.483
  22. Ozkaynak, H., Gullu, A., Gokse, T., Khajehdei, A., Mahdavi, M., Azizisales, F., Smyrou, E., Bal, I.E., Yuksel, E. and Karadogan, F. (2014), "Energy Dissipater Steel Cushions", Proceedings of the 2nd European Conference on Earthquake Engineering and Seismology, Istanbul, Turkey, August.
  23. Ozkaynak, H., Gullu, A., Khajehdehi, A., Gokce, T., Azizisales, F., Bal, I.E., Smyrou, E., Yuksel, E. and Karadogan, F. (2015), "Bidirectional loading tests of steel cushions", Proceedings of the 14th World Conference on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures (14WCSI), San Diego, CA, USA, September.
  24. Priestley, M.J., Sritharan, S., Conley, J.R. and Pampanin, S. (1999), "Preliminary results and conclusions from the PRESSS five-story precast concrete test building", J. PCI, 44(6), 42-67. https://doi.org/10.15554/pcij.11011999.42.67
  25. Rai, D.C. and Wallace, B.J. (1998), "Aluminum shear link for enhanced seismic resistance", Earthq. Eng. Struct. Dyn., 27(4), 315-342. https://doi.org/10.1002/(SICI)1096-9845(199804)27:4<315::AID-EQE703>3.0.CO;2-N
  26. Safecladding (2015), Improved Fastening Systems of Cladding Panels for Precast Buildings in Seismic Zones; Research for SME Associations Project FP7-314122.
  27. Sahoo, D.R., Singhal, T., Taraithia, S.S. and Saini, A. (2015), "Cyclic behavior of shear-and-flexural yielding metallic dampers", J. Constr. Steel Res., 114, 247-257. https://doi.org/10.1016/j.jcsr.2015.08.006
  28. Shultz, A.E. and Magana, R.A. (1996), "Seismic behavior of connections in precast concrete walls", Proceedings of Mete A. Sozen Symposium. ACI SP-162, American Concrete Institute, Farmington Hills, MI, USA.
  29. Smyrou, E., Gullu, A., Yuksel, E., Ozkaynak, H. and Karadogan, F. (2014), "Modelling of an Energy Dissipator for Precast RC Systems", Proceedings of the 2nd European Conference on Earthquake Engineering and Seismology, Istanbul, Turkey, August.
  30. Tsai, K., Chen, H., Hong, C. and Su, Y. (1993), "Design of steel triangular plate energy absorbers for seismic-resistant construction", Earthq. Spectra, 9(3), 505-528. https://doi.org/10.1193/1.1585727
  31. Toniolo, G. and Dal Lago, B. (2017), "Conceptual design and fullscale experimentation of cladding panel connection systems of precast buildings", Earthq. Eng. Struct. Dyn., 46(14), 2565-2586. https://doi.org/10.1002/eqe.2918
  32. Yuksel, E., Karadogan, F., Ozkaynak, H., Khajehdehi, A., Gullu, A., Smyrou, E. and Bal, I.E. (2018), "Behaviour of steel cushions subjected to combined Actions", Bull. Earthq. Eng., 16, 707-729. https://doi.org/10.1007/s10518-017-0217-4
  33. Zoubek, B., Fischinger, M. and Isakovic, T. (2016a), "Cyclic response of hammer-head strap cladding-to-structure connections used in RC precast buildings", Eng. Struct., 119, 135-148. https://doi.org/10.1016/j.engstruct.2016.04.002
  34. Zoubek, B., Fischinger, M. and Isakovic, T. (2016b), "Seismic response of short restrainers used to protect cladding panels in RC precast buildings", J. Vib. Control, 1077546316659780. DOI: 10.1177/1077546316659780

피인용 문헌

  1. Numerical Modelling of Energy Dissipative Steel Cushions vol.19, pp.4, 2019, https://doi.org/10.1007/s13296-019-00213-7