참고문헌
- Ryu, M. R., Lee, D. H., Lee, S. B., Park, J. H., Shim, J. J., "Study on Performance Experiment and Analysis of Aluminum Disc Brake," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 6, pp.60- 68, 2013. https://doi.org/10.14775/ksmpe.2013.12.6.060
- Lee, S. K. and Ryu, C. W., "Characteristics of Surface Roughness in the Wire-Cut Electric Discharge Cutting Conditions of Aluminium Alloy 2024," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 39-45, 2012.
- Kim, H. J. and Lee, U. R., "Characteristic Evaluation of Aluminium Filler Tube of Automotive," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9 No. 5, pp. 34-39, 2010.
- Ammar, H. R., Moreau, C., Samuel, A. M., Samuel, F. H. and Doty, H. W., "Influences of alloying elements, solution treatment time and quenching media on quality indices of 413-type Al-Si casting alloys," Materials Science and Engineering: A, Vol. 489, No. 1-2, pp. 426-438, 2008. https://doi.org/10.1016/j.msea.2007.12.032
- Dobrzanski, L. A., Maniara, R. and Sokolowski, J. H., "The effect of cast Al-Si-Cu alloy solidification rate on alloy thermal characteristic," Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, No. 1-2, pp. 217-220, 2006.
- Caceres, C. H., Svensson, I. L. and Taylor, J. A., "Strength-ductility behaviour of Al-Si-Cu-Mg casting alloys in T6 temper," Cast Metals Research, Vol. 15, No. 5, pp. 531-543, 2003. https://doi.org/10.1080/13640461.2003.11819539
- Haque, M. M. and Sharif, A., "Study on wear properties of aluminium-silicon piston alloy," Materials Processing Technology, Vol. 118, No. 1-3, pp. 69-73, 2001. https://doi.org/10.1016/S0924-0136(01)00869-X
- Belov, N. A., Eskin, D. G. and Avxentieva, N. N., "Constituent phase diagrams of the Al-Cu-Fe- Mg-Ni-Si system and their application to the analysis of aluminium piston alloys," Acta Materialia, Vol. 53, No. 17, pp. 4709-4722, 2005. https://doi.org/10.1016/j.actamat.2005.07.003
- Liu, X., Qiao, J., Wu, Y., Liu, X. and Bian, X., "EPMA analysis of calcium-rich compounds in near eutectic Al-Si alloys," Journal of alloys and compounds, Vol. 388, No. 1, pp. 83-90, 2005. https://doi.org/10.1016/j.jallcom.2004.07.012
- Tomida, S., Nakata, K., Shibata, S., Zenkouji, I. and Saji, S., "Improvement in wear resistance of hyper-eutectic Al-Si cast alloy by laser surface remelting," Surface and Coatings Technology, Vol. 169, pp. 468-471, 2003.
- Ashtari, P., Tezuka, H. and Sato, T., "Influence of Li addition on intermetallic compound morphologies in Al-Si-Cu-Fe cast alloys," Scripta Materialia, Vol. 51, No. 1, pp. 43-46, 2004. https://doi.org/10.1016/j.scriptamat.2004.03.022
-
Liao, H., Sun, Y. and Sun, G., "Correlation between mechanical properties and amount of dendritic
${\alpha}$ -Al phase in as-cast near-eutectic Al-11.6% Si alloys modified with strontium," Materials Science and Engineering: A, Vol. 335, No. 1-2, pp. 62-66, 2002. https://doi.org/10.1016/S0921-5093(01)01949-9 - Lasa, L. and Rodriguez-Ibabe, J. M., "Wear behaviour of eutectic and hypereutectic Al-Si-Cu-Mg casting alloys tested against a composite brake pad," Materials Science and Engineering: A, Vol. 363, No. 1-2, pp. 193-202, 2003. https://doi.org/10.1016/S0921-5093(03)00633-6
- Reif, W., Dutkiewicz, J., Ciach, R., Yu, S. and Krol, J., "Effect of ageing on the evolution of precipitates in AlSiCuMg alloys," Materials Science and Engineering: A, Vol. 234, pp. 165-168, 1997.
- Saheb, N., Laoui, T., Daud, A. R., Harun, M., Radiman, S. and Yahaya, R., "Influence of Ti addition on wear properties of Al-Si eutectic alloys," Wear, Vol. 249, No. 8, pp. 656-662, 2001. https://doi.org/10.1016/S0043-1648(01)00687-1
- Wang, G., Bian, X., Wang, W. and Zhang, J., "Influence of Cu and minor elements on solution treatment of Al-Si-Cu-Mg cast alloys," Materials Letters, Vol. 57, No. 24-25, pp. 4083-4087, 2003. https://doi.org/10.1016/S0167-577X(03)00270-2
- Dunn, R. and Dickert, W., "Magnesium effect on the strength of A380. 0 and 383.0 aluminum die casting alloys," Die Casting Engineer, Vol. 19, No. 2, pp. 12-20, 1975.
- Tsao, L. C., Tsai, T. C., Wu, C. S. and Chuang, T. H., "Brazeability of the 6061-T6 aluminum alloy with Al-Si-20Cu-based filler metals," Materials engineering and performance, Vol. 10, No. 6, pp. 705-709, 2001. https://doi.org/10.1361/105994901770344584
- Ouellet, P. and Samuel, F. H., "Effect of Mg on the ageing behaviour of Al-Si-Cu 319 type aluminium casting alloys," Materials Science, Vol. 34, No. 19, pp. 4671-4697, 1999. https://doi.org/10.1023/A:1004645928886
- Wang, G., Bian, X., Liu, X. and Zhang, J., "Effect of Mg on age hardening and precipitation behavior of an AlSiCuMg cast alloy," Materials science, Vol. 39, No. 7, pp. 2535-2537, 2004. https://doi.org/10.1023/B:JMSC.0000020022.19854.ac
- Gauthier, J., Louchez, P. R. and Samuel, F. H., "Heat treatment of 319.2 aluminium automotive alloy Part 1, Solution heat treatment," Cast Metals, Vol. 8, No. 2, pp. 91-106, 1995. https://doi.org/10.1080/09534962.1995.11819197
- Sablonniere, H. D. L. and Samuel, F. H., "Solution heat treatment of 319 aluminium alloy containing-0.5 wt% Mg. Part 1-solidification and tensile properties," Cast Metals Research, Vol. 9, No. 4, pp. 195-211, 1996. https://doi.org/10.1080/13640461.1996.11819661
- De la Sablonniere, H. and Samuel, F. H., "Solution heat treatment of 319 aluminium alloy containing- 0.5 wt% Mg. Part 2-microstructure-and fractography," Cast Metals Research, Vol. 9, No. 4, pp. 213-225, 1996. https://doi.org/10.1080/13640461.1996.11819662
- Ringer, S. P. and Hono, K., "Microstructural evolution and age hardening in aluminium alloys: atom probe field-ion microscopy and transmission electron microscopy studies," Materials characterization, Vol. 44, No. 1-2, pp. 101-131, 2000. https://doi.org/10.1016/S1044-5803(99)00051-0
- Totten, G. E., Mackenzie, D. S. and Dekker, M., Handbook of Aluminum: Vol. 1: Physical Metallurgy and Processes, CRC Press, pp. 272- 84, 2003.
피인용 문헌
- Effects of Long-term Artificial-Aging on the Hardness Variation of Dissimilar Metal Weldments vol.18, pp.1, 2018, https://doi.org/10.14775/ksmpe.2019.18.1.031