참고문헌
- Lyu, M. Y., Choi, T. G., "Research Trends in Polymer Materials for Use in Lightweight Vehicles", International Journal of Precision Engineering and Manufacturing, Vol. 16, No.1, pp. 213-220, 2014. https://doi.org/10.1007/s12541-015-0029-x
- Choi, B. H., "Development of Innovative Polymer Technologies for Automobiles", AUTO JOURNAL : Journal of the Korean Society of Automotive Engineers, Vol. 38, No. 5, pp. 15-19, 2016.
- Park, Y. S., Choi, S. B., Kim, S. W., "A Study on the Trend and Development Strategy of Automobile Lightweight Technology" Information Analysis Laboratory on Korea institute science and technology information, 2013.
- Kang, W. G., Yoo, S. E., Jeong, S. K., "Plastic Material Development Trends for Automobile," AUTO JOURNAL: Journal of the Korean Society of Automotive Engineers, Vol. 31, No. 6, pp. 15-19, 2009.
- Park, J. S., Gang, H. J., Lee, M. O., Park, K. J., Hwang, D., O., Go, S. B., Lee, J. H., Jeon, E. J., Yang, H. W., "Strategies Roadmap for International Patent Dispute Resolution(3D Printing)," Korea Intellectual Property Protection Association and Intellectual Property Protection Policy Division on Intellectual Property Office, 2015.
- Choi, B. S., "Changes in new technologies and industrial topography 3D printing," SCIENCE & TECHNOLOGY POLICY, Vol. 26, No. 5, pp. 24-31, 2016.
- Lee, O. S., Kim, D. H., "Reliability Estimation and Dynamic Deformation of Polymeric Material Using SHPB Technique and Probability Theory," Transactions of the Korean Society of Mechanical Engineers A, Vol. 32, No. 9, pp. 740-753, 2008. https://doi.org/10.3795/KSME-A.2008.32.9.740
- Han, S. Y., "A Study on the Deformation Optimization of a Plastic Bezel Assembled on the Steering Wheel of an Automobiles", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 5, pp. 105-112, 2017. https://doi.org/10.14775/ksmpe.2017.16.5.105
- Cho, J. W., Min, B. S., Han, M. S., "Basic Study on Impact Analysis of Automobile," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 1, pp. 64-70, 2017.
피인용 문헌
- Study of the Mechanical Properties and Orthotropy of ABS Materials Fabricated by FDM Printing vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.143
- Investigation of the Internal Stress Relaxation in FDM 3D Printing : Annealing Conditions vol.17, pp.4, 2018, https://doi.org/10.14775/ksmpe.2018.17.4.130
- Study on Electrical Characteristics of FDM Conductive 3D Printing According to Annealing Conditions vol.17, pp.6, 2018, https://doi.org/10.14775/ksmpe.2018.17.6.053
- 3D 프린터의 챔버 내부온도 변화에 대한 연구 vol.18, pp.3, 2018, https://doi.org/10.14775/ksmpe.2019.18.3.033
- FDM 3D Printer의 층간 충진율에 따른 강도변화 vol.18, pp.3, 2019, https://doi.org/10.14775/ksmpe.2019.18.3.066
- Fused Deposition Modeling 3D Printing-based Flexible Bending Sensor vol.19, pp.1, 2018, https://doi.org/10.14775/ksmpe.2020.19.01.063
- Manufacturing Experiments using FDM 3D-printed Flexible Resistance Sensors with Heterogeneous Polymer Material Annealing vol.19, pp.1, 2018, https://doi.org/10.14775/ksmpe.2020.19.01.081
- A Study on the Fatigue Fracture for Out-Plane Shear According to TDCB Slope Angle by Using UD CFRP vol.21, pp.2, 2018, https://doi.org/10.1007/s12541-019-00245-3
- Pressures monitored by 3D printed capacitive pressure sensor embedded on prosthetic upper-limb socket; a case study vol.16, pp.3, 2018, https://doi.org/10.1299/jbse.21-00077