DOI QR코드

DOI QR Code

전투차량 냉각수 호스 분리현상 개선에 관한 연구

A Study on the Improvement of the Separation Phenomenon of Coolant Hose in the Tracked Combat Vehicle

  • 투고 : 2018.03.07
  • 심사 : 2018.04.24
  • 발행 : 2018.06.30

초록

In general, tracked combat vehicles require excellent output performance of a power unit system to drive on special terrains and in extreme environmental conditions. However, high temperature and pressure are readily applied to the coolant hose in the power unit of the vehicles during high-speed driving under extreme road and weather conditions. These driving conditions can cause the separation phenomenon of the coolant hose in the power unit and consequentially engine overheating during driving. Therefore, a newly designed decompression device for the coolant hose has been proposed and manufactured to solve these problems in the present study. To validate of the newly proposed decompression device, the input and output pressures were measured under the before- and after-improvement conditions using experimental methods for different engine RPMs. In addition, the pre-heater temperature was measured under both conditions. From the experimental results, we expect that the current investigation can help to improve the driving performance of tracked combat vehicles.

키워드

참고문헌

  1. Ryu, J. M., Park, K. C., Kang, T. W., "A Study on the Structural Design for Safety Improvement of the Winch Mount of an Armored Recovery Vehicle", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 1, pp. 58-62, 2017. https://doi.org/10.14775/ksmpe.2016.16.1.058
  2. Moon, T. S., Kim, K. R., Lee, Y. K., Kang, T. W., Kim, J. K., Kim, S. I., Park, B. S., "Improvement of Engine Stall by Load Increment on Tracked Armored Vehicles", Journal of the KIMST, Vol. 18, No. 5, pp. 492-497, 2015.
  3. Park, K. S., Shin, J. S., Lee, K.W., "A Study on the Optimum of Cooling Water Temperature Control of an Automotive Engine", Journal of the Korean Society of Automotive Engineers, Vol. 14, No.2, pp. 34-43, 1992.
  4. Nair, S. and Dollar, A., "Stress and Strains in High-Pressure Composite Hoses", Journal of Pressure Vessel Technology, Vol. 119, pp. 351-355, 1997. https://doi.org/10.1115/1.2842315
  5. Goettler, R. A., Leib, R. I. and Lambright, A. J., "Short Fiber Reinforced Hose-A New Concept in Production and Performance", Rubber Chemistry and Technology, Vol. 52, No. 4, pp. 838-863, 1979. https://doi.org/10.5254/1.3535245
  6. Micols, M. E. and Pett, P. A., "Predicting the Life of Automotive Power Steering Hose Materials" Rubber World, Vol. 211, No. 6, pp. 27-31, 1995.
  7. Kim, H. J., Kim, B. T., "Effect of the Jaw Strokes on the Stress Variation of a Hose in the Manufacturing Process" proceedings of the KSMPE conference, pp. 335-339, 2006.
  8. Baek, J. K., Kim, B. T., "A Study on the Clamping Force of an Automotive Air-conditioning Hose according to the Friction Coefficient", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 3, pp. 39-46, 2011.

피인용 문헌

  1. A Study on Reliability Improvement of BLDC Motor for Combat Vehicle in High Temperature Environment vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.097
  2. 전투차량용 온수히터 냉각수 누수방지 설계에 관한 연구 vol.21, pp.10, 2020, https://doi.org/10.5762/kais.2020.21.10.379