DOI QR코드

DOI QR Code

핸드스캐닝 작업 방법에 따라 표준 모델 변형이 작업 정밀도에 미치는 정밀스캔에 관한 연구

A Study on the Accuracy of Scan by the Standard Model Deformation Depending on the Hand Scanning Method

  • 신성훈 (대성산업(주) 기계사업부) ;
  • 장성호 (경북대학교 치의과학과) ;
  • 송준기 (단국대학교 치의학과) ;
  • 박광식 (대구보건대학교 치기공과) ;
  • 이희성 (경북대학교 치의과학과)
  • Shin, Seong-Hun (Daesung Industrial Co., Ltd.) ;
  • Jang, Seong-Ho (Department of Dental Science, Graduate School, Kyungpook National University) ;
  • Song, Joon-Ki (Department of Prosthodontics, Graduate School, Dankook University) ;
  • Park, Kwang-Sig (Dept. of Dental Technology, Daegu Health College) ;
  • Lee, Hee-Sung (Department of Dental Science, Graduate School, Kyungpook National University)
  • 투고 : 2018.12.18
  • 심사 : 2018.04.06
  • 발행 : 2018.04.30

초록

본 연구는 치과분야에서 가장 큰 변화를 가져온 자동화 시스템의 보급화로 CAD/CAM이 사용됨에 따라, 로스트왁스 테크닉 기법 시스템을 대체 하고 있다. 이에 따라 인상재를 이용하여 구강을 채득하는 방법에서 구강스캐너를 활용하여 디지털 데이터로 치과보철물을 제작하고 있다. 그러나 구강스캐너의 스캐닝 방법에 따라 디지털 데이터의 정밀도가 많을 영향을 받고 있는 실정이다. 이에 본 연구의 목적은 구강스캐너 (Intraoral scanner)의 스캔 작업 방법에 따라 나타날 수 있는 왜곡현상 및 데이터 정확도를 평가하고자 한다. 데스탑 3D 모형 스캐너로 임상에서 사용된 석고 모델을 이용하여 표준 스캔 데이터를 만들고 동일한 모델을 사용하여 구강스캐너로 세 가지 다른 방법의(AS그룹, ZS그룹, OS그룹) 스캔 방법으로 구분하여 각 5회씩 그룹별로 스캔 데이터를 만들었고, ZS그룹에서 0.121mm, AS그룹 0.172mm, OS그룹 0.423mm 정확도를 보여 ZS그룹에서 가장 높은 정확도를 보였고, 최대오차 값은 ZS그룹 0.113mm, AS그룹 0.169mm, OS그룹 0.246으로 최대 오차는 ZS그룹이 가장 낮고 OS그룹이 가장 높게 측정되었다. 세 가지의 스캔 방법은 정확도나 재현성에 있어 확실한 차이를 보였으며 임상에서도 역시 의미 있는 결과로 보였다.

This study was conducted to evaluate the distortion and data accuracy that may occur depending on the methods employed by the oral scanner (intra-oral scanner). Deseutap 3D models employing a plaster model used clinically as a scanner to create a standard scan data using the same model, separated by oral scanners in three different ways (AS Group, ZS group, OS group) How to scan each 5 times made the scan data for each group, it shows the 0.121 mm, 0.172 mm AS group, OS group 0.423 mm accuracy in ZS group. The ZS group showed the highest accuracy, with maximum error values of 0.113 mm, 0.169 mm and 0.246 being observed for the ZS, AS and OS group, respectively. The three scanning methods showed a clear differences in accuracy and reproducibility and also appeared to be meaningful in clinical practice.

키워드

참고문헌

  1. A. J. Raigrodski, G. L. Chiche, "The safety and effi ciency of anterior ceramic fixed partial dentures: a review of the literature," J Prosthet Dent, vol. 86, no. 5, pp. 520-525, 2001. DOI: https://doi.org/10.1067/mpr.2001.120111
  2. A. J. Raigrodski, "Contemporary materials and technologies for all-ceramic fixed partial dentures: A review of the literature," J Prosthet Den, vol. 92, no. 6, pp. 557-562, 2004. DOI: https://doi.org/10.1016/j.prosdent.2004.09.015
  3. T. MIYAZAKI, Y. HOTTA, J. KUNII, S. KURIYAMA, Y. TAMAKI, "A review of dental CAD/CAM: current status and future perspectives from 20 years of experience," Dental materials journal, vol. 28, no. 1, pp. 44-56, 2009. DOI: https://doi.org/10.4012/dmj.28.44
  4. K. B. KIM, J. H. Kim, W. C. Kim, H. Y. Kim, J. H. Kim, "Marginal fit evaluation of 3 unit fixed dental prostheses fabricated by rapid prototyping method," Journal of Korean Academy of Dental Technology, 2012, vol. 34, no. 2, pp. 105-111, 2012. DOI: https://doi.org/10.14347/kadt.2012.34.2.105
  5. W. Boehler, M. B. Vicent, A. Marbs, "Investigating laser scanner accuracy," Int Arch Phot Rem & Sens, vol. 21, no. 114, pp. 141-160, 2003. DOI: https://doi.org/10.1111/j.1477-9730.2006.00367.x
  6. T. Hironori, K. Tatsuya, N. Hironori, H. Kiyoshi, "A method of tooth superimposition on MRI data for accurate measurement of vocal tract shape and dimensions," Acoustical science and technology, vol. 25, no. 6, pp. 468-474, 2004. DOI: https://doi.org/10.1250/ast.25.468
  7. C. Nardy, W. Alon, P. Nathan, S. Amir, L. Joshua, "Navigation surgery for dental implants: assessment of accuracy of the image guided implantology system." Journal of oral and maxillofacial surgery, vol. 62, no. 2, pp. 116-119, 2004. DOI: https://doi.org/10.1016/j.joms.2004.06.028
  8. T. M. Arendorf, D. M. Walker, "The prevalence and intra-oral distribution of Candida albicans in man," Archives of Oral Biology, vol. 25, no. 1, pp. 1-10, 1980. DOI: https://doi.org/10.1016/0003-9969(80)90147-8
  9. T. Warnke, F. R. Carls, H. F. Sailer, "A new method for assessing the temporomandibular joint quantitatively by dental scan," Journal of Cranio-Maxillofacial Surgery, vol. 24, no. 3, pp. 168-172, 1996. DOI: https://doi.org/10.1016/S1010-5182(96)80051-5
  10. W. H. Moörmann, "The evolution of the CEREC system," The Journal of the American Dental Association, vol. 137, no. 1, pp. 7S-13S, 2006. DOI: https://doi.org/10.14219/jada.archive.2006.0398
  11. N. Martin, N. M. Jedynakiewicz, "Clinical performance of CEREC ceramic inlays: a systematic review," Dental Materials, vol. 15, no. 1, pp. 54-61, 1999. DOI: https://doi.org/10.1016/S0109-5641(99)00014-7
  12. J. B. Ludlow, M. Ivanovic, "Comparative dosimetry of dental CBCT devices and 64-slice CT for oral and maxillofacial radiology," Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, vol. 106, no. 1, pp. 106-114. 2008. DOI: https://doi.org/10.1016/j.tripleo.2008.03.018
  13. Y. Arai, E. Tammisalo, K. Iwai, K. Hashimoto, K. Shinoda, "Development of a compact computed tomographic apparatus for dental use," Dentomaxillofacial Radiology, vol. 28, no. 4, pp. 245-248, 1999. DOI: https://doi.org/10.1038/sj/dmfr/4600448
  14. T. MIYAZAKI, Y. HOTTA, J. KUNII, S. KURIYAMA, Y. TAMAKI, "A review of dental CAD/CAM: current status and future perspectives from 20 years of experience," Dental materials journal, vol. 28, no. 1, pp. 44-56, 2009. DOI: https://doi.org/10.4012/dmj.28.44
  15. R. Luthardt, A. Weber, H. Rudolph, C. Schöne, S. Quaas, M. Walter, "Design and production of dental prosthetic restorations: basic research on dental CAD/ CAM technology," International journal of computerized dentistry, vol. 5, no. 2-3, pp. 165-176, 2002.
  16. C. Tais, D. Nikolaj, F. Rune. V. Barthe, "Method and apparatus for three-dimensional optical scanning of interior surfaces," U.S. Patent, 2003.
  17. B. M. Patzelt, S. Vonau, S. Stampf, W. Att, "Assessing the feasibility and accuracy of digitizing edentulous jaws," The Journal of the American Dental Association, vol. 144, no. 8, pp. 914-920, 2013. DOI: https://doi.org/10.14219/jada.archive.2013.0209
  18. M. Figliuzzi, F. Mangano, C. Mangano, "A novel root analogue dental implant using CT scan and CAD/CAM: selective laser melting technology," International journal of oral and maxillofacial surgery, vol. 41, no. 7, pp. 858-862, 2012. DOI: https://doi.org/10.1016/j.ijom.2012.01.014
  19. X. Lin, T Chen, J Liu, T Jiang, D Yu, S. G. Shen, "Point-based superimposition of a digital dental model on to a three-dimensional computed tomographic skull: an accuracy study in vitro," Br J Oral Maxillofac Surg, vol. 53, no. 1, pp. 28-33, 2015. DOI: https://doi.org/10.1016/j.bjoms.2014.09.007
  20. T. J. Park, S. H. Lee, K. S. Lee, "A method for mandibular dental arch superimposition using 3D cone beam CT and orthodontic 3D digital model," Korean J Orthod, vol. 42, no. 1, pp. 169-181, 2012. DOI: https://doi.org/10.4041/kjod.2012.42.4.169
  21. J. H. Kim, S. H. Oh, S. H. Uhm, B. K. Min, Evaluation of Comparable Scanning Accuracy in Various Intraoral Scanner Systems: An Example of ADA 132 Standard Model," Korean Journal of Dental Materials, vol. 44, no. 3, pp. 247-254, 2017. DOI: https://doi.org/10.14815/kjdm.2017.44.3.247
  22. T. Fortin, G. Champleboux, J. Lormee, J. L. Coudert, "Precise dental implant placement in bone using surgical guides in conjunction with medical imaging techniques," The Journal of oral implantology, vol. 26, no. 4, pp. 300-303, 2000. DOI: http://dx.doi.org/10.1563/1548-1336(2000)026<0300:PDIPIB>2.3.CO;2