한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제17권2호
  • /
  • Pages.89-94
  • /
  • 2018
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

소실모형주조법에 의한 내마모 복합조직층 형성에 미치는 공정인자의 영향

Effects of Parameters on Abrasion-Resistant Layer of Composite Structure Formed by Evaporation Pattern Casting

  • 최창영 (한국생산기술연구원 극한가공기술그룹) ;
  • 모남규 (한국생산기술연구원 극한가공기술그룹) ;
  • 김건호 (한국생산기술연구원 극한가공기술그룹) ;
  • 윤종천 (한국생산기술연구원 극한가공기술그룹) ;
  • 정유현 (한국생산기술연구원 극한가공기술그룹) ;
  • 김동혁 (한국생산기술연구원 극한가공기술그룹) ;
  • 최용진 (한국생산기술연구원 극한가공기술그룹) ;
  • 이인규 (한국생산기술연구원 극한가공기술그룹) ;
  • 조용재 (한국생산기술연구원 극한가공기술그룹)
  • Choi, Chang-Young (Extreme fabrication technology R&D group, Korea Institute of Industrial Technology) ;
  • Mo, Nam-Gyu (Extreme fabrication technology R&D group, Korea Institute of Industrial Technology) ;
  • Kim, Gun-ho (Extreme fabrication technology R&D group, Korea Institute of Industrial Technology) ;
  • Yoon, Jong-Cheon (Extreme fabrication technology R&D group, Korea Institute of Industrial Technology) ;
  • Jung, Yu-Hyun (Extreme fabrication technology R&D group, Korea Institute of Industrial Technology) ;
  • Kim, Dong-Hyuk (Extreme fabrication technology R&D group, Korea Institute of Industrial Technology) ;
  • Choi, Yong-Jin (Extreme fabrication technology R&D group, Korea Institute of Industrial Technology) ;
  • Lee, In-Kyu (Extreme fabrication technology R&D group, Korea Institute of Industrial Technology) ;
  • Cho, Yong-Jae (Extreme fabrication technology R&D group, Korea Institute of Industrial Technology)
  • 투고 : 2018.03.12
  • 심사 : 2018.03.19
  • 발행 : 2018.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Due to industrial advancement and environmental concerns, there is a demand for light-weight material parts with high-performance characteristics. In order to meet this demand, various studies have been conducted on developing high-performance castings to achieve composite features by coating only specific parts that require high performance, with dissimilar joining, rather than coating the entire material part. This study analyzed the possibility of forming a local composite layer on an aluminum alloy through evaporation pattern casting, and the effects of parameters on the aluminum alloy.

키워드

참고문헌

  1. Song, J. Y., Park, J. C., Ahn, Y. S., "Effect of cast microstructure on fatigue behaviors of A356 aluminum alloy for automotive wheel", Journal of Korea Foundry Society, Vol. 30, No. 1, pp. 46-51, 2010.
  2. Joo, Y. H., Park, Y. C., Lee, Y. M., Kim, K. H., Kang, M. C., "The Weldability of a Thin Friction Stir Welded Plate of Al5052-H32 using High Frequency Spindle", J. Korean Soc. Manuf. Process Eng., Vol. 16, No. 1, pp. 90-95, 2017. https://doi.org/10.14775/ksmpe.2016.16.1.090
  3. Lee, D. Y., Park, K. D., Kang, D. M., "A Study on the Finite Element Analysis in Friction Stir Welding of Al Alloy", J. Korean Soc. Manuf. Process Eng., Vol. 14, No. 5, pp. 81-87, 2015. https://doi.org/10.14775/ksmpe.2015.14.5.081
  4. Kim, J. M., Ha, T. H., Choi, G. H., "Mechanical Properties and mold Filling Capability of Al-Si-Mg Casting Alloy Fabricated by Lost Foam Casting Process", Journal of Korea Foundry Society, Vol. 36, pp. 153-158, 2016. https://doi.org/10.7777/jkfs.2016.36.5.153
  5. Lee, K. H., Yoo, K. J., Baek, E. R., Choi, H. J., Lee, K. W., "The Effect of Mold Density and Evacuation on Surface Defect in Lost Form Casting of High Chromium Cast Irons", Journal of Korea Foundry Society, Vol. 22, pp. 309-314, 2002.
  6. Bates, H. E., Littleton, C. E., McMellon, B., Stroom, P., "Technological Developments and Worldwide Market Growth in Lost Foam Casting Production", Transactions of the American Foundry Society, Vol. 109, pp. 1-16, 2001.
  7. Fu, J., Tsai, H. L., Askeland, D. A., "Effect of Vent-Holes in Patterns on Filling Process and Casting Quality Using the Evaporative Pattern Process", AFS Transactions, Vol. 99, pp. 305-311, 1991.
  8. Bailey, R., "Understanding the Evaporative Pattern Casting Process(EPC)", Modern Casting, Vol. 72, No. 4, pp. 58-61, 1982.

피인용 문헌

  1. 유선형 차체가 적용된 1인용 저속 전기 자동차의 설계 및 제작 vol.17, pp.4, 2018, https://doi.org/10.14775/ksmpe.2018.17.4.055