DOI QR코드

DOI QR Code

Current Reference Compensation for Fast Response in PCMC of PSFB Converter

PSFB 컨버터의 PCMC에서 빠른 응답특성을 가지기 위한 전류 명령 보상

  • Received : 2017.12.12
  • Accepted : 2018.02.01
  • Published : 2018.04.20

Abstract

Phase-shift fullbridge (PSFB) converter detects the current in the primary side for operation of the peak current mode controller (PCMC). The PCMC must used the slope compensation to solve the problem when the effective duty is over 0.5. The voltage response of PSFB converters has slower than that of buck converter because of slew interval even if the voltage controllers of two converters have same bandwidth. To overcome these problems, this work proposes a compensating method of current reference considering slew interval and fast response in the PSFB converter. The effectiveness of the proposed method is proven using the PSIM simulation and experiment.

Keywords

References

  1. C. Y. Jeong, “Improved phase-shift pulse-width modulation full-bridge converter using a blocking capacitor,” Journal of KIEE, Vol. 25, No. 8, pp. 20-29, Aug. 2011.
  2. T. Grote, F. Schafmeister, H. Figge, N. Frohleke, P. Ide, and J. Bocker, "Adaptive digital slope compensation for peak current mode control," IEEE Energy Conversion Congress and Exposition ECCE 2009, pp. 3523-3529, Sep. 2009.
  3. S. Chattopadhyay and S. Das "A digital current-mode control technique for DC-DC converters," IEEE Trans. on power electronics, Vol. 21, No. 6, pp. 1718-1726, Nov. 2006. https://doi.org/10.1109/TPEL.2006.882929
  4. S. R. Lee, H. W. Kim, K. Y. Cho, H. C. Jung, J. H. Kim, and G. C. Park, “An output control algorithm for phase shift full bridge converter for ballast water treatment,” The Transactions of the Korean Institute of Power Electronics, Vol. 18, No. 6, pp. 530-539, Dec. 2013. https://doi.org/10.6113/TKPE.2013.18.6.530