Fig. 1 Schematic diagram for determining Bi-linear stress-strain approximation from true stress-true strain curve
Fig. 2 Comparison of Bi-linear stress-strain curves of SA312 TP316 and TP304 stainless steels determined by JSME CC and their true stress-strain curves
Fig. 3 Comparison of Bi-linear stress-strain curves determined by using Cy and CE of TP316 and TP304 stainless steels and true stress-strain curves of SA312 TP347 and CF8A cast austenitic stainless steels
Fig. 4 Comparison of Bi-linear stress-strain curves of carbon steels determined by JSME CC and true stress-strain curves of SA106 Gr.B and Gr.C carbon steels
Fig. 5 Comparison of Bi-linear stress-strain curves of carbon steel determined by JSME CC and true stress-strain curves of SA508 Gr.1a low-alloy steel
Fig. 6 Proposed new Cy and CE for carbon steel piping material
Fig. 7 Proposed new Cy and CE for low-alloy steel piping material
Fig. 8 Comparison of Bi-linear stress-strain curves determined by proposed model and true stress-strain curves
Table 1 Comparison of Cy and CE of austenitic stainless steels given by JSME CC and those obtained from experimental data
Table 2 Comparison of Cy and CE for carbon steels given by JSME CC and those obtained from the experimental data
참고문헌
- Saji, G., 2014, "Safety goals for seismic and tsunami risks: Lessons learned from the Fukushima Daiichi disaster," Nucl. Eng. Des., Vol.280, pp.449-463. https://doi.org/10.1016/j.nucengdes.2014.09.013
- Stevenson, J.D., 2014, "Summary of the historical development of seismic design of nuclear power plants in Japan and the U.S.," Nucl. Eng. Des., Vol.269, pp.160-164. https://doi.org/10.1016/j.nucengdes.2013.08.023
- IAEA, 2016, "Consideration of the application of the IAEA safety requirements for the design of nuclear power plants," International Atomic Energy Agency, Vienna, IAEA TECDOC-1791.
- ASME BPVC Sec. III Div.1 Sub. NB, 2007, "Rules for Construction of Nuclear Facility Components," American Society of Mechanical Engineers, NY.
- Donavin, P.R., 2016, "Technical Basis for Proposed ASME Section XI Code Case on Beyond Design Bases Earthquake," Proc. of ASME 2016 PVP Conference, Vancouver, BC, July 17-21, PVP2016-63827.
- Nakamura, I. and Kasahara, N., 2015, "Excitation tests on elbow pipe specimens to investigate failure behavior under excessive seismic loads," Proc. of ASME 2015 PVP Conference, Boston, MA, July 19-23, PVP2015-45711.
- OECD/NEA, 2015, "Interim Report on Metallic Components Margins under High Seismic Loads," Nuclear Energy Agency, Paris, NEA/CSNI/R(2015)8.
- Paul, S. K. Sivaprasad, S., Dhar, S., and Tarafder, S., 2011, "Key issues in cyclic plastic deformation: Experimentation," Mech. of Mater., Vol.43, pp.705-720. https://doi.org/10.1016/j.mechmat.2011.07.011
- Jeon, D. S., Kang, J. Y., Huh, N. S., Kim, J. S., and Kim, Y. J., 2017, "Effects of Hardening Models on Cyclic Deformation Behavior of Tensile Specimen and Nuclear Piping System," Trans. of the KPVP, Vol.13, No.2, pp.67-74.
- Chaboche, J. L., Dnag Van, K., and Gordier, G., 1979, "Modelization of the Strain Memory Effect on the Cyclic Hardening of 316 Stainless Steel," Proc. of 5th Int. Conference on SMiRT, Div.L, Berlin, Germany.
- Otani, A., Shibutani, T., Morishita, M, Nakamura, I., Watanabe, T., and Shiratori, M., 2017, "Seismic Qualification of Piping System by Detailed Inelastic Response Analysis Part 2. A Guideline for Piping Seismic Inelastic Response Anslysis," Proc. of ASME 2017 PVP Conference, Wailkoloa, HW, July 16-20, PVP2017-65190.
- ASME BPVC Sec. II Part D, 2010, "Properties Materials," American Society of Mechanical Engineers, NY.
- Morishita, M, Otani, A., Watanabe, T., Nakamura, I., Shibutani, T., and Shiratori, M., 2017, "Seismic Qualification of Piping System by Detailed Inelastic Response Analysis Part 1. A Code Case for Piping Sesimic Evaluation Based on Detailed Inelastic Response Analysis," Proc. of ASME 2017 PVP Conference, Wailkoloa, HW, July 16-20, PVP2017-65166.
- Nara, K., Nakamura, K., Yasunami, H., Kawabata, F., and Shiwaku, T., 2004, "Statistic investigation for thickness and strength of structural steel plate used for bridge," J. of Jap. Soc. Civ. Eng., No.752/I-66, pp.299-310 (in Japanese).
- JSME, 2015, "Code for nuclear power generation facilities: rules on design and construction for nuclear power plants", Japanese Society of Mechanical Engineers, JSME SNC1-2015(in Japanese).
- Nakamura, I., Otani, A., Morishita, M, Shiratori, M., Watanabe, T., and Shibutani, T., 2017, "Seismic Qualification of Piping System by Detailed Inelastic Response Analysis Part 3 - Variation in Elastic-Plastic Analysis Results on Carbon Steel Pipes from the Benchmark Analyses and the Parametric Analysis," Proc. of ASME 2017 PVP Conference, Wailkoloa, HW, July 16-20, PVP2017-65316.