Fig. 1 Typical structure of supersonic free-jet(7)
Fig. 2 Qualitative behavior of critical mass flux
Fig. 3 Contour of Mach number (Free jet, test 5)
Fig. 4 Free jet test comparison
Fig. 5 Contour of Mach number (Impinging jet, test 11)
Fig. 6 Impinging jet test comparison
Fig. 7 Contour of Mach number
Fig. 8 Pressure distribution along jet centerline
Fig. 9 Contour of Mach number (P0=10 bar)
Fig. 10 Radial distribution of impinging pressure (P0=10 bar)
Fig. 11 Impinging pressure at center of target plate(P0=10 bar)
Fig. 12 Impinging force acting on the target plate(P0=10 bar)
Fig. 13 Contour of Mach number (=44 bar)
Fig. 14 Radial distribution of impinging pressure (P0=44 bar)
Fig. 15 Impinging pressure at center of target plate (P0=44 bar)
Fig. 16 Impinging force acting on the target plate (P0=44 bar)
References
- Oh, S., Choi, D. K., Kim, W. T., Chang, Y. and Choi, C., 2017, "Numerical Analysis on Feedback Mechanism of Supersonic Impinging Jet using LES," Trans. of the KPVP, Vol. 13, No. 2, pp. 51-59.
- Choi, C., Oh, S., Choi, D. K., Kim, W. T., Chang, Y. and Kim, S. H., 2016, "CFD Analysis for Steam Jet Impingement Evaluation," Trans. of the KPVP, Vol. 12, No. 2, pp. 58-65.
- ANS, 1998, "Design Basis for Protection of Light Water Nuclear Power Plants against the Effects of Postulated Pipe Rupture," ANSI/ANS-58.2-1988(W1998).
- Wallis, G., 2004, The ANSI/ANS Standard 58.2-1988: Two Phase Jet Model.
- Ransom., V., 2004, Comments on GSI-191 Models for Debris Generation.
- USNRC, 2007, "Determination of Rupture Locations and Dynamics Effects Associated with the Postulated Rupture of Piping(Rev.2)," U.S. Nuclear Regulatory Commission, Washington, D.C., NUREG-0800.
- Kim, H. and Shin, H., 1994, "Numerical Study on Under-Expanded Jets through a Supersonic Nozzle (II)," Trans. of the KSME(B), Vol. 20, No. 6, pp.1994-2004.
- Krothapalli, A., Hsia, Y. Baganoff, D. and Karamcheti, K., 1986, "The Role of Screech Tones in Mixing of an Underexpanded Rectangular Jet," J. Sound Vib., Vol. 106, No. 1, pp.119-143. https://doi.org/10.1016/S0022-460X(86)80177-8
- ANSYS, Inc., 2010, ANSYS Fluent User Guide.
- KAERI, 1993, "A State-of-the-Art Report on Two-Phase Critical Flow Modeling," Korea Atomic Energy Research Institute, KAERI/AR-377/93.
- Johnson, R. W., 1998, The Handbook of Fluid Dynamics, Springer, pp.17-32 - 17-33.
- Healzer, J. M. and Elias, E., 1986, "Two-Phase Jet Modeling and Data Comparison," Electric Power Research Institute, Palo Alto, CA, EPRI NP-4362.