DOI QR코드

DOI QR Code

GA를 이용한 복수 애로공정 생산방식제어

Production Control in Multiple Bottleneck Processes using Genetic Algorithm

  • 류일환 (금오공과대학교 경영학과) ;
  • 이정호 (금오공과대학교 산업공학과) ;
  • 이종환 (금오공과대학교 산업공학과)
  • Ryoo, Ilhwan (Department of Business Administration, Kumoh National Institute of Technology) ;
  • Lee, Jung-ho (The School of Industrial Engineering, Kumoh National Institute of Technology) ;
  • Lee, Jonghwan (The School of Industrial Engineering, Kumoh National Institute of Technology)
  • 투고 : 2017.12.15
  • 심사 : 2018.03.20
  • 발행 : 2018.03.31

초록

This paper seeks to present a multi-control method that can contribute to effective control of the production line with multiple bottleneck processes. The multi-control method is the production system that complements shortcomings of CONWIP and DBR, and it is designed to determine the raw material input according to the WIP level of two bottleneck processes and WIP level of total process. The effectiveness of the production system developed by applying the multi-control method was verified by the following three procedures. Raw material input conditions of the multi-control method are as follows. First, raw materials are go into the production line when the number of the total process WIP is lower than established number of WIP in total process and first process is idle. Second, raw materials are introduced when the number of WIP of two bottleneck processes is lower than the established number of WIP of each bottleneck process. Third, raw materials are introduced when the first process and in front of bottleneck process are idle even if the number of WIP in the total process is less than established number of WIP of the total process. The production line with two bottleneck processes was selected as the condition for production environment, and the production process modeling of CONWIP, DBR and multi-control production method was defined according to the production condition. And the optimum limited WIP level suitable for each system was obtained by applying a genetic algorithm to determine the total limited number of WIP of CONWIP, the limited number of WIP of DBR bottleneck process, the number of WIP in the total process of multi-control method and the limited number of WIP of bottleneck process. The limited number of WIP of CONWIP, DBR and multi-control method obtained by the genetic algorithm were applied to ARENA modeling, which is simulation software, and a simulation was conducted to derive result values on the basis of three criteria such as production volume, lead time and number of goods in-progress.

키워드

참고문헌

  1. Grosfeld-Nir, A. and Magazine, M., Gated MaxWIP : a strategy for controlling multistage production system, International Journal of Production Research, 2002, Vol. 40, No. 11, pp. 2557-2568. https://doi.org/10.1080/00207540210128251
  2. Grosfeld-Nir, A., Magazine, M., and Vanberkel, A., Push and pull strategies for controlling multistage production system, International Journal of Production Research, 2000, Vol. 38, No. 11, pp. 2361-2375. https://doi.org/10.1080/00207540050031814
  3. Kim, H.N., A Study on Optimization of Manufacturing Flow Line, Using TOC and Pull-Push System, Chungnam National University, 2008.
  4. Kim, J., Jung, J.Y., and Lee, J., Optimizing Work-In- Process Parameter using Genetic Algorithm, Journal of Society of Korea Industrial Systems Engineering, 2017, Vol. 40, No. 2, pp. 79-86.
  5. Kwon, C.M. and Lim, S.G., Bottleneck Detection Based on Duration of Active Periods, Journal of the Korea Society for Simulation, 2013, Vol. 22, No. 3, pp. 35-41. https://doi.org/10.9709/JKSS.2013.22.3.035
  6. Lee et al., Development of Robotic System based on RFID Scanning for Efficient Inventory Management of Thick Plates, Journal of the Korea Academia-Industrial Cooperation Society, 2016, Vol. 17, No. 10, pp. 1-8. https://doi.org/10.5762/KAIS.2016.17.10.1
  7. Lee, G.H., The performance Evaluation of DBR for An MTO Manufacturing with an Assembly Process, AJU University, 2009.
  8. Lee, H.C. and Seo, D.W., Comparison of DBR with CONWIP in a Production Line with Constant Processing Times, Journal of the Korea Society for Simulation, 2012, Vol. 21, No. 4, pp. 11-24. https://doi.org/10.9709/JKSS.2012.21.4.011
  9. Park, S.G., Performance comparison of process control mechanism due to changes in the production environment, Hongik University Institute of Technology, 2010.
  10. Satya, S.C., An evaluation of the DBR control mechcanism in a job shop environment, Omega, 2001, Vol. 29, No. 4, pp. 335-342. https://doi.org/10.1016/S0305-0483(01)00028-7
  11. Spearman, M.L., Woodruff, D.L., and Hopp, W.J., CONWIP : a pull alternative to kanban, International Journal of Production Research, 1990, Vol. 28, No. 5, pp. 879-894. https://doi.org/10.1080/00207549008942761
  12. Watson, K.J. and Patti, A., A comparison of JIT and TOC buffering philosophies on system performance with unplanned machine downtime, International Journal of Production Research, 2008, Vol. 46, No. 7, pp. 1869-1885. https://doi.org/10.1080/00207540600972943