한국섬유공학회지 (Textile Science and Engineering)

  • 제55권6호
  • /
  • Pages.425-431
  • /
  • 2018
  • /
  • 1225-1089(pISSN)
  • /
  • 2288-6419(eISSN)
한국섬유공학회 (The Korean Fiber Society)
권호 표지
DOI QR코드

DOI QR Code

PP 및 PE/PP 시스-코어 부직포의 열융착 거동의 차이에 기인한 접착 특성 및 통기성에 관한 연구

Adhesion Characteristics and Air Permeability of PP Mono-component and PE/PP Sheath-core Nonwovens Affected by Differences in Thermal Bonding Behavior

  • 최세진 (부산대학교 유기소재시스템공학과) ;
  • 이도준 (부산대학교 유기소재시스템공학과) ;
  • 박충렬 (정산인터내셔널) ;
  • 이현석 (한국섬유개발연구원) ;
  • 김한성 (부산대학교 유기소재시스템공학과)
  • Choi, Sejin (Department of Organic Material Science and Engineering, Pusan National University) ;
  • Lee, Do Jun (Department of Organic Material Science and Engineering, Pusan National University) ;
  • Park, Choong Ryoel (Jeongsan International) ;
  • Lee, Hyun Seok (Korea Textile Development Institute) ;
  • Kim, Han Seong (Department of Organic Material Science and Engineering, Pusan National University)
  • 투고 : 2018.11.01
  • 심사 : 2018.12.19
  • 발행 : 2018.12.31
⟨ 이전 논문 다음 논문 ⟩

초록

Herein, the thermal adhesion behavior of polypropylene (PP) mono-component and polyethylene/PP sheath-core non-wovens was investigated. The materials generally showed good mechanical properties and environmental benefits. The proper bonding temperature was determined because thermal bonding among fiber networks results in adversely affects bonding strength and structural integrity. The morphology of the adhesive interface, thermal shrinkage, wrinkle properties, and compressive properties were also characterized and showed that differences in thermal behaviors due to the material and dimensional variation affected bonding strength and air permeability. It is expected that these results, that also include flexibility and durability measurements, will provide guidance for the manufacturing of products containing these materials.

키워드

참고문헌

  1. S. B. Gwak and S. R. Lee, "The Technology of Lightweight Interior Parts in Automotive with Uni-material & Process", Journal of the Korean Society of Automotive Engineers, 2011, 33, 39-47. https://doi.org/10.4491/KSEE.2011.33.1.039
  2. J. H. Cheon, "Technical Trend of High Functional Adhesive Material", J. Adhes. Interface, 2016, 17, 72-76.
  3. H. S. Ju, H. R. Yun, S. M. Yeon, and K. T. Ko, "Case Study on the Target Products for Applicable Uni-materailization", Clean Technology, 2013, 19, 173-183. https://doi.org/10.7464/ksct.2013.19.2.173
  4. J. S. Kim, J. K. Yang, J. S. Kim, and M. H. Hong, "A Study on the Necessity of Package Used the Uni-Material: Focused on the Personal and Household Care Products Package", J. Korean Society of Design Culture, 2012, 18, 64-73.
  5. J. S. Shin, J. M. Park, Y. H. Lee, and H. D. Kim, "Preparation and Properties of Eco-friendly Waterborne Polyurethane-urea Primer for Thermoplastic Polypropylene Applied to Automobile Interiors", Clean Technology, 2014, 20, 232-240. https://doi.org/10.7464/ksct.2014.20.3.232
  6. D. Mann, "Automotive Plastics & Composites", 2nd ed., Elsevier Advanced Technology, UK, 1999, pp.28-30.
  7. H. P. Lee and Y. T. Kim, "A Study on the Fire Risk of Car Interior Materials", Journal of Korean Institute of Fire Science and Engineering, 2010, 24, 82-88.
  8. J. S. Youm and H. J. Kang, "Adhesioin Mechanism of Polyurethane Adhesive for Laminated Steel Plate", Polymer (Korea), 2012, 36, 119-123. https://doi.org/10.7317/pk.2012.36.2.119
  9. M. C. Lee, M. C. Park, and I. S. Seo, "Environment-friendly Adhesives", Fiber Sci. Technol., 2000, 11, 450-459.
  10. K. J. Ryu and C. Y. Park, "Synthesis and Properties of Ecofriendly Polyurethane Adhesive without Solvent : Effect of DPE-41, TDI, Initiator and Plasticizer Content", J. Environ. Sci. Int., 2014, 23, 1909-1918. https://doi.org/10.5322/JESI.2014.23.11.1909
  11. Y. S. Chun, Y. K. Hong, and K. H. Chung, "Functional Improvement of Hot Melt Adhesive Using Polyamide Type Resin-(I) Physical Properties of Adhesives", J. Korean Ind. Eng. Chem., 1996, 7, 194-202.
  12. L. Wang and F. Iidal, "Physical Connection and Disconnection Control Based on Hot Melt Adhesives", IEEE-ASME Transactions on Mechatronics, 2013, 18, 1397-1409. https://doi.org/10.1109/TMECH.2012.2202558
  13. K. H. Chung, Y. K. Hong, and Y. S. Chun, "Functional Improvement of Hot Melt Adhesive Using Polyamide Type Resin (II) The Effects of Terpene Resin", J. Korean Ind. Eng. Chem., 1998, 9, 226-231.
  14. M. J. Choi, B. Y. Jeong, J. M. Cheon, C. S. Ha, and J. H. Chun, "Adhesioin Property of Low-Viscosity Polyurethane Hot-Melt Adhesive in according to the Deblocking Temperature and Content of Reactive Diluents", J. Adhes. Interface, 2016, 17, 67-71. https://doi.org/10.17702/jai.2016.17.2.67
  15. E. Masaeli, M. Morshed, and H. Tavanai, "Study of the Wettability Properties of Olypropylene Nonwoven Mats by Low-pressure Oxygen Plasma Treatment", Surface and Interface Analysis, 2007, 39, 770-774. https://doi.org/10.1002/sia.2587
  16. O. G. Armagan, B. K. Kayaoglu, H. C. Karakas, and F. S. Guner, "Adhesion Strength Behaviour of Plasma Pre-treated and Laminated Polypropylene Nonwoven Fabrics Using Acrylic and Polyurethane-based Adhesives", J. Ind. Text., 2014, 43, 396-414. https://doi.org/10.1177/1528083712458303
  17. L. Wang and F. Iidal, "Physical Connection and Disconnection Control Based on Hot Melt Adhesives", IEEE-ASME Transactions on Mechatronics, 2013, 18, 1397-1409. https://doi.org/10.1109/TMECH.2012.2202558
  18. S. Choi, J. H. Lim, and H. S. Kim, "Effect of Bonding Temperature on the Adhesion Characteristics and Mechanical Properties of Non-woven LMPET/PET", Text. Sci. Eng., 2018, 55, 112-117.
  19. F. Rombaldoni, K. Mahmood, A. Varesano, M. B. Songia, A. Aluigi, C. Vineis, and G. Mazzuchetti, "Adhesion Enhancement of Electrospun Nanofiber Mats to Polypropylene Nonwoven Fabric by Low-temperature Oxygen Plasma Treatment", Surface & Coatings Technology, 2013, 216, 178-184. https://doi.org/10.1016/j.surfcoat.2012.11.056
  20. C. H. Kim, S. J. Choi, H. S. Lee, and H. S. Kim, "Study on the Olefin Adhesion Layer Produced by Melt-blowing LDPE", Text. Sci. Eng., 2016, 53, 68-74. https://doi.org/10.12772/TSE.2016.53.068
  21. M. Kucuk and Y. Korkmaz, "Sound Absorption Properties of Bilayered Nonwoven Composites", Fiber. Polym., 2015, 16, 941-948. https://doi.org/10.1007/s12221-015-0941-9
  22. J. Lee, S. Lee, J. Shim, P. Jung, W. Lee, and B. Bang, "The Study on Improvement of Acoustic Performance for Automobile Sound-absorbing Materials Using Hollow Fiber", Transactions of the Korean Society for Noise and Vibration Engineering, 2011, 21, 850-857. https://doi.org/10.5050/KSNVE.2011.21.9.850
  23. S. J. Choi, D. J. Lee, H. S. Lee, and H. S. Kim, "Thermal Behavior of Mono-component and Sheath-core Nonwoven Polyolefin", Text. Sci. Eng., 2017, 54, 80-86. https://doi.org/10.12772/TSE.2017.54.080
  24. C. J. Choi, H. J. Kim, Y. C. Jin, and H. S. Kim, "Objective Wrinkle Evaluation System of Fabrics Based on 2D FFT", Fiber. Polym., 2009, 10, 260-265. https://doi.org/10.1007/s12221-009-0260-0