References
- Heo, J. Y., Jeong, K. Y. and Sung, H. G., "Numerical Study of tne Dynamic Characteristics of Pintle Nozzles for Variable Thrust", Journal of Propulsion and Power, Vol. 31, No. 1, pp.230-237, 2015. https://doi.org/10.2514/1.B35257
- Chwalowski, Pawel., Smith-Kent, Randall. and Loh, Hai-Tien., "Analytical Contouring of Pintle Nozzle Exit Cone using Computational Fluid Dynamics", 31st Joint Propulsion Conference, San Diego, CA, USA, A1AA 95-2877, July 1995.
- Ostander, M. J., Bergmans, J. L. and Thomas, M. E., "Pintle Motor Challenges for Tactical Missiles", 36th Joint Propulsion Conference, Huntsville, Alabama, USA, AIAA 2000-3310, July 2000.
- Prozan, R. J., "CFD Prediction of Nozzle Flow Separation without Boundary Layer Resolution", 35th Joint Propulsion Conference, Los Angeles, California, USA, AIAA 99-2645, June 1999.
- Kim, J. K. and Park, J. H., "Investigation of Pintle Shape Effect on the Nozzle Perfomance", Journal of the Korean Society for Aeronautical and Space Sciences, Vol. 36, No. 8, pp.790-796, 2008. https://doi.org/10.5139/JKSAS.2008.36.8.790
- Kim, J. K. and Park, J. H., "Numerical Study of the Effect of Pintle Shape on the Thrust Level," Journal of the Korean Society for Aeronautical and Space Sciences, Vol. 37, No. 5, pp.476-482, 2009. https://doi.org/10.5139/JKSAS.2009.37.5.476
- Lee, J. H., Park, B. H. and Chang, H. B., "Analysis of the Pintle Nozzle Characteristics - I : Steady State Performance" The Korean Society of Propulsion Engineers Fall Conference, Yeosu, Korea, pp.355-361, November 2012.
- Kim, J. K., Lee, J. H. and Chang, H. B., "Computational Investigation of Pintle Nozzle Flow", Journal of the Korean Society of Propulsion Engineers, Vol. 13, No. 2, pp.35-41, 2009.
- Sung, H. G., Jeong, K. Y. and Heo, J. Y., "Performance characteristics of a pintle nozzle using the conformal sliding mesh technique", Aerospace Science and Technology, Vol. 61, pp.85-94, 2017. https://doi.org/10.1016/j.ast.2016.11.022
- Menter, F. R., Kuntz, M. and Langtry, R., "Ten Years of Industrial Experienced with the SST Turbulence Model", Turbulence, Heat and Mass Transfer 4, pp.625-632, 2003.
- Sarkar, S., Erlebacher, G., Hussaini, M. Y. and Kreiss, H. O., "Analysis and Modelling of Dilatational Terms in Compressible Turbulence", Journal of Fluid Mechanics, Vol. 227, pp.473-493, 1991. https://doi.org/10.1017/S0022112091000204
- Kim, K. H., Lee, K. T., Rho, O. H. and Kim, C. A., "Development and analysis of AUSMPW+", Journal of the Korean Society for Aeronautical and Space Sciences, Vol. 29, No. 8, pp.45-56, 2001.
- Yoon, S. K. and Jameson, A., "Lower-upper Symmetric-Gauss-Seidel method for the Euler and Navier-Stokes equations", AIAA, Vol. 26, No. 9, pp.1025-1026, 1988. https://doi.org/10.2514/3.10007
- S., Venkateswaran, Li, D. and Merkle, C. L., "Influence of stagnation regions on preconditioned solution at low speeds", 41st Aerospace Sciences Meeting and Exhibit, Reno, Nevada, USA, AIAA 2003-435, January 2003.
- Choi, Y. H. and Merkle, C. L., "The Application of Preconditioning in Viscous Flows", Journal of Computational Physics, Vol. 105, No. 2, pp.207-223, 1993. https://doi.org/10.1006/jcph.1993.1069
- Lee, J. H., Park, B. H. and Yoon, W. S., "Parametric Investigation of the Pintle-perturbed Conical Nozzle Flows", Aerospace Science and Technology, Vol. 26, No. 1, pp.268-279, 2013. https://doi.org/10.1016/j.ast.2012.05.005
- Ostlund, J. and Muhammad-Klingmann, B., "Supersonic flow separation with application to rocket engine nozzles", Applied Mechanics Review, Vol. 58, No. 3 pp.143-175, 2005. https://doi.org/10.1115/1.1894402