Fig. 1. Experimental equipment used for phantom production.
Fig. 2. 3D Printing production process.
Fig. 3. CT number ROI setup (a) femur head, (b) femur neck, (c) Femur body
Fig. 4. X-ray imaging system and phantom
Fig. 5. X-ray imaging SI and SNR setup
Table 1. Set-up of 3D printer
Table 2. The result of CT number measurement for Pelvis Phantom and 3D Printing Phantom
Table 3. The result of SI measurement for Pelvis Phantom and 3D Printing Phantom.
Table 4. The result of SNR measurement for Pelvis Phantom and 3D Printing Phantom.
References
- J. C. Yang, G. H. Park, T. W. Kim, J. I. Ryoo, M. P. Ji, J. O. Kim, "Clinical Features of Percutaneous Hemivertebroplasty in Patients with Osteoporotic Vertebral Compression Fractures," Korean journal of neurotrauma, Vol. 9, No. 1, pp.17-22, 2013. https://doi.org/10.13004/kjnt.2013.9.1.17
- T. S. Kim, "Cadaver Fitting Test of Mechanical Circulatory Assist Device Including Korean Artificial Heart (AnyHeart) in Korea," Anatomy & Cell Biology, Vol. 36, No. 4, pp.301-307, 2003.
- M. H. Baek, G. K. Kim, S. Y. Han, C. M. Hwang, "Analysis of Trabecular Bone Strength using Finite Element Analysis," Korean journal of Osteoporosis, Vol. 9, No. 2, pp.180-185, 2011.
- S.H. Kim, D. W. Kim, N. G. Kim, "Fall Simulation and Impact Absorption system for Development of Fracture Prevention System," Korean journal of Biomedical Engineering Letters, Vol. 31, No. 6, pp.438-448, 2010.
- H. Y. Jeong, "Osteoporosis Diagnosis and Treatment 2007," Korean journal of Endocrinology, Vol. 23, No. 2, pp. 76-108, 2008. https://doi.org/10.3803/jkes.2008.23.2.76
- H. G. Yoon, Y. B. Kim, G. W. Seo, "Postoperative Mortality and the Associated Factors in Elderly Patients with Hip Fracture," Korean Journal of Orthophaedic, Vol. 47, No. 6, pp. 445-451, 2012.
- http://opendata.hira.or.kr/op/opc/olap4thDsInfo.do
- S.W. Chae, G.D. Kim, "Radiographic Diagnosis of the Osteoporotic Vertebral Fractures," Korean Journal of Osteoporosis, Vol. 11, No. 1, pp. 59-65, 2013.
- B.J. Ahn, J.H. Lee, S.B. Lee, "A Study on Exposure to radiation of the patient who visited an emergency room at a University Hospital," Korean Journal Society of Radiology, Vol. 2, No. 3, pp. 23-34, 2007.
- http://www.law.go.kr/LSW//lsInfoP.do?lsiSeq=7984&chrClsCd=010202&urlMode=lsInfoP&efYd=19891230#0000
- W. G. Oh, "valuation of Usefulness and Availability for Orthopedic Surgery using Clavicle Fracture Model Manufactured by Desktop 3D Printer," Korean Journal of Radiological Science and Technology, Vol. 37, No. 3, pp. 203-209, 2014.
- S. J. Kang, M. H. Woo, "A Study on the Qualification Development of 3D Printing Operation Expert and 3D Printing Development Specialist," Korean Journal Academia-Industrial cooperation Society, Vol. 17, No. 10, pp. 37-38, 2016. https://doi.org/10.5762/KAIS.2016.17.2.37
- W. Choi, J.H. Woo, J.B. Jeon, S.S. Yoon, "Measurement of Structural Properties of PLA Filament as a Supplier of 3D Printer," Korean Society of Agricultural Engineers, Vol. 57, No. 6, pp. 141-152, 2015. https://doi.org/10.5389/KSAE.2015.57.6.141
- W. G. Oh, H. G. Kim, "Comparison of the Quality of Clavicle Fracture Three-dimensional Model Printing by Open Source and Commercial use Digital Imaging and Communications in Medicine Stereolithography File Conversion Program," Korean Journal of Radiological Science and Technology, Vol. 41, No. 1, pp. 1-6, 2018. https://doi.org/10.17946/JRST.2018.41.1.1
- G. Hilgers, T. Nuver, A. Minken, "The CT number accuracy of a novel commercial metal artifact reduction algorithm for large orthopedic implants," Journal of Applied Clinical Medical Physics, Vol. 15, No. 1, pp. 274-278, 2014. https://doi.org/10.1120/jacmp.v15i1.4597
- S. H. Kang, Y. G. Lee, Y. J. Lee, "Feasibility of Application for Fast Non Local-Means (FNLM) Algorithm with Medical Imaging System: a Simulation Study," Korean journal of of The Institute of Electronics and Information Engineers, Vol. 55, No. 3, pp. 141-145, 2018.
- J. Y. Bae, E. J. Choi, S. A. Kim, "A Study on the State-of-the-Art of 3D Printers," The korean society of computer and information, Vol. 21, No. 32, pp. 385-388, 2013.
- Y. Altintas, D. Ertay, A. Yuen, "Synchronized material deposition rate control with path velocity on fused filament fabrication machines," Additive Manufacturing, Vol. 19, No. 1, pp. 205-213, 2018. https://doi.org/10.1016/j.addma.2017.05.011
- M. S. Yoon, "A Study on CT image wuality and dose measurement Phantom using 3D printer," Graduate school of Eulji University, Republic of Korea, Master's thesis, 2018.
- W. G. Oh, "Development of 3D Printer System for Making Customized Bone Models of Orthopedic Surgery Patient," Graduate school of Choongbook University, Republic of Korea, Doctoral dissertation. 2013.
- W. J. Choi, J. B. Jeon, J. H. Woo, "Making Human Phantom for X-ray Practice with 3DPrinting," The Korean Journal Society of Radiology, Vol. 11, No. 5, pp. 371-377, 2017.
Cited by
- FFF방식의 3D프린터 노즐 크기와 층 높이가 방사선 차폐체 제작에 미치는 영향에 관한 연구 vol.14, pp.7, 2018, https://doi.org/10.7742/jksr.2020.14.7.891
- 단일조사 whole spine Lateral 검사에서 3D 프린터로 제작한 구리 필터 유용성 연구 vol.14, pp.7, 2020, https://doi.org/10.7742/jksr.2020.14.7.899