DOI QR코드

DOI QR Code

Blast behavior of steel infill panels with various thickness and stiffener arrangement

  • 투고 : 2017.06.17
  • 심사 : 2018.01.05
  • 발행 : 2018.03.10

초록

Infill panel is the first element of a building subjected to blast loading activating its out-of-plane behavior. If the infill panel does not have enough ductility against the loading, it breaks and gets damaged before load transfer and energy dissipation. As steel infill panel has appropriate ductility before fracture, it can be used as an alternative to typical infill panels under blast loading. Also, it plays a pivotal role in maintaining sensitive main parts against blast loading. Concerning enough ductility of the infill panel out-of-plane behavior, the impact force enters the horizontal diaphragm and is distributed among the lateral elements. This article investigates the behavior of steel infill panels with different thicknesses and stiffeners. In order to precisely study steel infill panels, different ranges of blast loading are used and maximum displacement of steel infill under such various blast loading is studied. In this research, finite element analyses including geometric and material nonlinearities are used for optimization of the steel plate thickness and stiffener arrangement to obtain more efficient design for its better out-of-plane behavior. The results indicate that this type of infill with out-of-plane behavior shows a proper ductility especially in severe blast loadings. In the blasts with high intensity, maximum displacement of infill is more sensitive to change in the thickness of plate rather the change in number of stiffeners such that increasing the number of stiffeners and the plate thickness of infill panel would decrease energy dissipation by 20 and 77% respectively. The ductile behavior of steel infill panels shows that using infill panels with less thickness has more effect on energy dissipation. According to this study, the infill panel with 5 mm thickness works better if the criterion of steel infill panel design is the reduction of transmitted impulse to main structure. For example in steel infill panels with 5 stiffeners and blast loading with the reflected pressure of 375 kPa and duration of 50 milliseconds, the transmitted impulse has decreased from 41206 N.Sec in 20 mm infill to 37898 N.Sec in 5 mm infill panel.

키워드

참고문헌

  1. ABAQUS, C. (2012), Analysis User's Manual, Version 6.12-3.
  2. Al-Thairy, H. (2016), "A modified single degree of freedom method for the analysis of building steel columns subjected to explosion induced blast load", J. Imp. Eng., 94, 120-133. https://doi.org/10.1016/j.ijimpeng.2016.04.007
  3. Alisjahbana, S.W. and Wangsadinata, W. (2011), "Response of damped orthotropic stiffened plates subjected to a stepped triangular blast loading", Proc. Eng., 14, 989-996. https://doi.org/10.1016/j.proeng.2011.07.124
  4. ASCE (2011), Design of Blast Resistant Buildings in Petrochemical Facilities, American Society of Civil Engineers, Petrochemical Committee, Task Committee on Blast Resistant Design, New York, U.S.A.
  5. Azevedo, R.L. and Alves, M. (2008), "A numerical investigation on the visco-plastic response of structures to different pulse loading shapes", Eng. Struct., 30(1), 258-267. https://doi.org/10.1016/j.engstruct.2007.04.002
  6. Baker, W.E., Cox, P.A., Kulesz, J.J., Strehlow, R.A. and Westine, P. S. (2012), Explosion Hazards and Evaluation (Vol. 5), Elsevier Scientific Publishing Company, New York, U.S.A.
  7. Biggs, J.M. (1964), Introduction to Structural Dynamics, McGraw-Hill College.
  8. Clough, R.W. and Penzien, J. (1993), Dynamics of Structures, McGraw-Hill, New York, U.S.A.
  9. Dharaneepathy, M.V. and Sudhesh, K.G. (1990), "Optimal stiffening of square plates subjected to air-blast loading", Comput. Struct., 36(5), 891-899. https://doi.org/10.1016/0045-7949(90)90160-4
  10. DiPaolo, B.P. and Woodson, S.C. (2006), "An overview of research at ERDC on steel stud exterior wall systems subjected to severe blast loading", Proceedings of the Structures Congress 2006: Structural Engineering and Public Safety.
  11. Elsanadedy, H.M., Almusallam, T.H., Alharbi, Y.R., Al-Salloum, Y.A. and Abbas, H. (2014), "Progressive collapse potential of a typical steel building due to blast attacks", J. Constr. Steel Res., 101, 143-157. https://doi.org/10.1016/j.jcsr.2014.05.005
  12. Geretto, C., Yuen, S.C.K. and Nurick, G.N. (2015), "An experimental study of the effects of degrees of confinement on the response of square mild steel plates subjected to blast loading", J. Imp. Eng., 79, 32-44. https://doi.org/10.1016/j.ijimpeng.2014.08.002
  13. Hrynyk, T.D. and Myers, J.J. (2008), "Out-of-plane behavior of URM arching walls with modern blast retrofits: Experimental results and analytical model", J. Struct. Eng., 134(10), 1589-1597. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:10(1589)
  14. Iqbal, M.A., Senthil, K., Bhargava, P. and Gupta, N.K. (2015), "The characterization and ballistic evaluation of mild steel", J. Imp. Eng., 78, 98-113. https://doi.org/10.1016/j.ijimpeng.2014.12.006
  15. Jacob, N., Nurick, G.N. and Langdon, G.S. (2007), "The effect of stand-off distance on the failure of fully clamped circular mild steel plates subjected to blast loads", Eng. Struct., 29(10), 2723-2736. https://doi.org/10.1016/j.engstruct.2007.01.021
  16. Jacob, N., Yuen, S.C.K., Nurick, G.N., Bonorchis, D., Desai, S.A. and Tait, D. (2004), "Scaling aspects of quadrangular plates subjected to localised blast loads-experiments and predictions", J. Imp. Eng., 30(8), 1179-1208. https://doi.org/10.1016/j.ijimpeng.2004.03.012
  17. Johnson, G.R. and Cook, W.H. (1983), "A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures", Proceedings of the 7th International Symposium on Ballistics.
  18. Jones, N. (2011), Structural Impact, Cambridge University Press.
  19. Kadid, A. (2008), "Stiffened plates subjected to uniform blast loading", J. Civil Eng. Manage., 14(3), 155-161. https://doi.org/10.3846/1392-3730.2008.14.11
  20. Markose, A. and Rao, C.L. (2017), "Mechanical response of V shaped plates under blast loading", Thin-Wall. Struct., 115, 12-20. https://doi.org/10.1016/j.tws.2017.02.002
  21. Mazek, S.A. (2014), "Performance of sandwich structure strengthened by pyramid cover under blast effect", Struct. Eng. Mech., 50(4), 471-486. https://doi.org/10.12989/sem.2014.50.4.471
  22. Mazek, S.A. and Wahab, M. (2015), "Impact of composite materials on buried structures performance against blast wave", Struct. Eng. Mech., 53(3), 589-605. https://doi.org/10.12989/sem.2015.53.3.589
  23. Mendis, P. and Ngo, T. (2003), "Vulnerability assessment of concrete tall buildings subjected to extreme loading conditions", Proceedings of the CIB-CTBUH International Conference on Tall Buildings.
  24. Moghimi, H. and Driver, R.G. (2010), "Computational analysis of steel plate shear walls under accidental blast loading", Proceedings of the 2nd Specialty Conference on Disaster Mitigation, Winnipeg, Manitoba, Canada.
  25. Moghimi, H. and Driver, R.G. (2014), "Performance assessment of steel plate shear walls under accidental blast loads", J. Constr. Steel Res., 106, 44-56.
  26. Nguyen, T.P. and Tran, M.T. (2011), "Response of vertical wall structures under blast loading by dynamic analysis", Proc. Eng., 14, 3308-3316. https://doi.org/10.1016/j.proeng.2011.07.418
  27. Olmati, P., Petrini, F. and Bontempi, F. (2013), "Numerical analyses for the structural assessment of steel buildings under explosions", Struct. Eng. Mech., 45(6), 803-819. https://doi.org/10.12989/sem.2013.45.6.803
  28. Pandey, A.K. (2010), "Damage prediction of RC containment shell under impact and blast loading", Struct. Eng. Mech., 36(6), 729-744. https://doi.org/10.12989/sem.2010.36.6.729
  29. Sabuwala, T., Linzell, D. and Krauthammer, T. (2005), "Finite element analysis of steel beam to column connections subjected to blast loads", J. Imp. Eng., 31(7), 861-876. https://doi.org/10.1016/j.ijimpeng.2004.04.013
  30. Salim, H., Dinan, R. and Townsend, P.T. (2005), "Analysis and experimental evaluation of in-fill steel-stud wall systems under blast loading", J. Struct. Eng., 131(8), 1216-1225. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:8(1216)
  31. Smilowitz, R. (2002), "Analytical tools for progressive collapse analysis", Proceedings of the National Workshop on Prevention of Progressive Collapse.
  32. Smith, N.L., Tait, M.J., El-Dakhakhni, W.W. and Mekky, W.F. (2016), "Response analysis of reinforced concrete block infill panels under blast", J. Perform. Constr. Facilit., 30(6), 04016059. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000825
  33. Smith, P.D. and Hetherington, J.G. (1994), Blast and Ballistic Loading of Structures, Butterworth and Heinemann, Oxford.
  34. Snyman, I.M. (2010), "Impulsive loading events and similarity scaling", Eng. Struct., 32(3), 886-89. https://doi.org/10.1016/j.engstruct.2009.12.014
  35. Tavakoli, H.R. and Kiakojouri, F.O.A.D. (2014), "Numerical dynamic analysis of stiffened plates under blast loading", Lat. Am. J. Sol. Struct., 11(2), 185-199. https://doi.org/10.1590/S1679-78252014000200003
  36. Turkmen, H.S. and Mecitoglu, Z. (1999), "Dynamic response of a stiffened laminated composite plate subjected to blast load", J. Sound Vibr., 221(3), 371-389. https://doi.org/10.1006/jsvi.1998.1976
  37. UFC 3-340-02 (2008), Structures to Resist the Effects of Accidental Explosions, Unified Facilities Criteria, US Department of Defense, Washington, U.S.A.
  38. Wierzbicki, T. and Florence, A.L. (1970), "A theoretical and experimental investigation of impulsively loaded clamped circular viscoplastic plates", J. Sol. Struct., 6(5), 553-568. https://doi.org/10.1016/0020-7683(70)90030-2
  39. Yuen, S.C.K., Langdon, G.S., Nurick, G.N., Pickering, E.G. and Balden, V.H. (2012), "Response of V-shape plates to localised blast load: Experiments and numerical simulation", J. Imp. Eng., 46, 97-109. https://doi.org/10.1016/j.ijimpeng.2012.02.007
  40. Zhang, P., Cheng, Y., Liu, J., Li, Y., Zhang, C., Hou, H. and Wang, C. (2016), "Experimental study on the dynamic response of foam-filled corrugated core sandwich panels subjected to air blast loading", Compos. Part B: Eng., 105, 67-81. https://doi.org/10.1016/j.compositesb.2016.08.038
  41. Zheng, C., Kong, X.S., Wu, W.G. and Liu, F. (2016), "The elasticplastic dynamic response of stiffened plates under confined blast load", J. Imp. Eng., 95, 141-153. https://doi.org/10.1016/j.ijimpeng.2016.05.008
  42. Zoghi, M.A. and Mirtaheria, M. (2016), "Progressive collapse analysis of steel building considering effects of infill panels", Struct. Eng. Mech., 59(1), 59-82. https://doi.org/10.12989/sem.2016.59.1.059

피인용 문헌

  1. Computational predictions for predicting the performance of steel 1 panel shear wall under explosive loads vol.38, pp.9, 2018, https://doi.org/10.1108/ec-09-2020-0492