참고문헌
- Lee, D., Kim, Y., Kim, B., "Stability analysis of floating ring bearing supported turbocharger", J. Korean Soc. Tribol. Lubr. Eng., Vol. 31, No. 6, pp. 302-307, 2015. https://doi.org/10.9725/kstle.2015.31.6.302
- Brouwer, M. D., Sadeghi, F., Lancaster, C., Archer, J., Donaldson, J., "Whirl and friction characteristics of high speed floating ring and ball bearing turbochargers", Journal of Tribology, Vol. 135, No. 4, p. 041120, 2013.
- Ertas, B. H., Camatti, M., Mariotti, G., "Synchronous response to rotor imbalance using a damped gas bearing", Journal of Engineering for Gas Turbines and Power, Vol. 132, No. 3, p. 032501, 2010. https://doi.org/10.1115/1.3157097
- Vance, J., Zeidan, F., Murphy, B., Machinery Vibration and Rotordynamics, Chap. 4, p.123, John Wiley & Sons, Inc., Hoboken, New Jersey, 2010.
- San Andres, L., Barbarie, V., Bhattacharya, A., Gjika, K., "On the effect of thermal energy transport to the Performance of (Semi) floating ring bearing systems for automotive turbochargers," Journal of Engineering for Gas Turbines and Power, Vol. 134, No. 10, p. 102507, 2012. https://doi.org/10.1115/1.4007059
- Gjika, K., San Andres, L., Larue, G. D., "Nonlinear dynamic behavior of turbocharger rotor-bearing systems with hydrodynamic oil film and squeeze film damper in series: Prediction and experiment", Journal of Computational and Nonlinear Dynamics, Vol. 5, No. 4, p. 041006, 2010. https://doi.org/10.1115/1.4001817
- Brouwer, M. D., Sadeghi, F., "Investigation of turbocharger dynamics using a combined explicit finite and discrete element method rotor-cartridge model," Journal of Tribology, Vol. 139, No. 1, p. 012201, 2016. https://doi.org/10.1115/1.4033101
- Ashtekar, A., Sadeghi, F.Z, "Experimental and analytical investigation of high speed turbocharger ball bearings", Journal of Engineering for Gas Turbines and Power, Vol. 133, No. 12, p. 122501, 2011. https://doi.org/10.1115/1.4004004
- Hibner, D. H., "Dynamic Response of viscous-damped multi-shaft jet engines," Journal of Aircraft, Vol. 12, No. 4, pp. 305-312, 1975. https://doi.org/10.2514/3.44448
- Barrett, L. E., Gunter, E. J., "Steady-state and transient analysis of a squeeze film damper bearing for rotor stability," NASA-CR-2548, 1975.
- Chen, W. J., Gunter, E. J., Introduction to Dynamics of Rotor-Bearing Systems, Chap. 7, pp. 328, Trafford Publishing, BC, Canada, 2007.
- Vance, J., Zeidan, F., Murphy, B., Machinery Vibration and Rotordynamics, Chap. 3, p.84, John Wiley & Sons, Inc., Hoboken, New Jersey, 2010.
피인용 문헌
- Wire Mesh Dampers for Semi-Floating Ring Bearings in Automotive Turbochargers: Measurements of Structural Stiffness and Damping Parameters vol.11, pp.4, 2018, https://doi.org/10.3390/en11040812
- Stability and bifurcation analysis of a bevel gear system supported by finite-length squeeze film dampers vol.100, pp.4, 2018, https://doi.org/10.1007/s11071-020-05723-2