References
- Cheon, S.S., Choi, J.H., and Lee, D.G., "Development of the Composite Bumper Beam for Passenger Cars," Composite Structures, Vol. 32, 1995, pp. 491-499. https://doi.org/10.1016/0263-8223(95)00078-X
- Hosseinzadeh, R., Shokrieh, M.M., and Lessard, L.B., "Parametric Study of Automotive Composite Bumper Beams Subjected to Low-velocity Impacts," Composite Structures, Vol. 68, 2005, pp. 419-427. https://doi.org/10.1016/j.compstruct.2004.04.008
- Davoodi, M.M., Sapuan, S.M., Ahmad, D., Ali, A., Khalina, A., and Jonoobi, M., "Mechanical Properties of Hybrid Kenaf/glass Reinforced Epoxy Composite for Passenger Car Bumper Beam," Materials & Design, Vol. 31, 2010, pp. 4927-4932. https://doi.org/10.1016/j.matdes.2010.05.021
- Davoodi, M.M., Sapuan, S.M., Ahmad, D., Aidy, A., Khalina, A., and Jonoobi, M., "Concept Selection of Car Bumper Beam with Developed Hybrid Bio-composite Material," Materials & Design, Vol. 32, 2011, pp. 4857-4865. https://doi.org/10.1016/j.matdes.2011.06.011
- Belingardi, G., Beyene, A.T., and Koricho, E.G. "Geometrical Optimization of Bumper Beam Profile Made of Pultruded Composite by Numerical Simulation," Composite Structures, Vol. 102, 2013, pp. 217-225. https://doi.org/10.1016/j.compstruct.2013.02.013
- Kim, D.H., Kim, H.G., and Kim, H.S., "Design Optimization and Manufacture of Hybrid Glass/carbon Fiber Reinforced Composite Bumper Beam for Automobile Vehicle," Composite Structures, Vol. 131, 2015, pp. 742-752. https://doi.org/10.1016/j.compstruct.2015.06.028
- Marzbanrad, J., Alijanpour M., and Kiasat, M.S., "Design and Analysis of an Automotive Bumper Beam in Low-speed Frontal Crashes," Thin-Walled Structures, Vol. 47, No. 8, 2009, pp. 902-911. https://doi.org/10.1016/j.tws.2009.02.007
- Bumper Test Protocol (Version VI), Insurance institute for highway safety, April 2007.
- Jeong, C.H., Oh, H.S., and Cheon, S.S., "A Study on the Composite Bumper Beam with Multiple Phase Material Properties," Proceedings of KSCM, 2017 Spring Conference, Sejong, South Korea, 2017.
- Jeong, C.H., Oh, H.S., Ham, S.W., and Cheon, S.S., "A Study of a Piecewisely-angled Fibre Composite Beams Based on 3 Point Bending Analysis," Proceedings of KSCM, 2017 Fall Conference, Daejon, South Korea, 2017.
- Bai, Y., Teng, X., and Wierzbicki, T., "On the Application of Stress Triaxiality Formula for Plane Strain Fracture Testing," J. Engineering Materials & Technology, Trans. ASME, Vol 131, 2009, 021002. https://doi.org/10.1115/1.3078390
- Cheon, S.S., Lee, D.G., and Jeong, K.S., "Composite Side-door Impact Beams for Passenger Cars," Composite Structures, Vol. 38, 1997, pp. 229-239. https://doi.org/10.1016/S0263-8223(97)00058-5
- Allaire, G., and Delgado, G., "Stacking Sequence and Shape Optimization of Laminated Composite Plates via a Level-set Method," J. the Mechanics and Physics of Solids, Vol. 97, 2016, pp. 168-196. https://doi.org/10.1016/j.jmps.2016.06.014
- Standard Test Method for Tensile Properties of Polymer Matric Composite Materials (ASTM D3039/3039M.), ASTM International, West Conshohocken.
- Kim, B.J., Kim, H.S., and Lee, D.G., "Design of Hybrid Steel/Composite Circular Plate Cutting Tool Structures," Composites Structures, Vol. 75, 2006, pp. 250-260. https://doi.org/10.1016/j.compstruct.2006.04.028
- Kasavajhala, A.R.M., and Gu, L., "Fracture Analysis of Kevlar-49/Epoxy and E-Glass/Epoxy Doublers for Reinforcement of Cracked Aluminum Plates," Composites Structures, Vol. 93, 2011, pp. 2090-2095. https://doi.org/10.1016/j.compstruct.2011.02.012
- Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials (ASTM D7264/7264M), ASTM International, West Conshohocken.
- Lee, D.G., and Suh, N.P., Axiomatic Design and Fabrication of Composite Structures, Oxford University Press, New York, 2006.
Cited by
- CFRP 디스플레이 월마운트암의 강성과 구조강도의 평가 vol.22, pp.2, 2019, https://doi.org/10.21289/ksic.2019.22.2.147