DOI QR코드

DOI QR Code

A laboratory and numerical study on the effect of geogrid-box method on bearing capacity of rock-soil slopes

  • 투고 : 2017.02.09
  • 심사 : 2017.08.09
  • 발행 : 2018.03.20

초록

Currently, layered geogrid method (LGM) is the commonly practiced technique for reinforcement of slopes. In this paper the geogrid-box method (GBM) is introduced as a new approach for reinforcement of rock-soil slopes. To achieve the objectives of this study, a laboratory setup was designed and the slopes without reinforcements and reinforced with LGM and GBM were tested under the loading of a circular footing. The effect of vertical spacing between geogrid layers and box thickness on normalized bearing capacity and failure mechanism of slopes was investigated. A series of 3D finite element analysis were also performed using ABAQUS software to supplement the results of the model tests. The results indicated that the load-settlement behavior and the ultimate bearing capacity of footing can be significantly improved by the inclusion of reinforcing geogrid in the soil. It was found that for the slopes reinforced with GBM, the displacement contours are widely distributed in the rock-soil mass underneath the footing in greater width and depth than that in the reinforced slope with LGM, which in turn results in higher bearing capacity. It was also established that by reducing the thickness of geogrid-boxes, the distribution and depth of displacement contours increases and a longer failure surface is developed, which suggests the enhanced bearing capacity of the slope. Based on the studied designs, the ultimate bearing capacity of the GBM-reinforced slope was found to be 11.16% higher than that of the slope reinforced with LGM. The results also indicated that, reinforcement of rock-soil slopes using GBM causes an improvement in the ultimate bearing capacity as high as 24.8 times more than that of the unreinforced slope.

키워드

참고문헌

  1. Alamshahi, S. and Hataf, N. (2009), "Bearing capacity of strip footings on sand slopes reinforced with geogrid and gridanchor", Geotext. Geomembr., 27(3), 217-226. https://doi.org/10.1016/j.geotexmem.2008.11.011
  2. Alkasawneh, W., Husein Malkawi, A.I., Nusairat, J.H. and Albataineh, N. (2008), "A comparative study of various commercially available programs in slope stability analysis", Comput. Geotech., 35(3), 428-435. https://doi.org/10.1016/j.compgeo.2007.06.009
  3. Azzam, W.R. and Nasr, A.M. (2014), "Bearing capacity of shell strip footing on reinforced sand", J. Adv. Res., 6(5), 727-737. https://doi.org/10.1016/j.jare.2014.04.003
  4. Binquet, J. and Lee, K.L. (1975), "Bearing capacity tests on reinforced earth slabs", J. Geotech. Eng. Div., 101(12), 1241-1255.
  5. Bishop, A.W. (1955), "The use of the slip circle in the stability analysis of slopes", Geotechnique, 5 7-17. https://doi.org/10.1680/geot.1955.5.1.7
  6. Das, B.M., Shin, E.C. and Omar, M.T. (1994), "The bearing capacity of surface strip foundations on geogrid-reinforced sand and clay-a comparative study", Geotech. Geol. Eng., 12(1), 1-14. https://doi.org/10.1007/BF00425933
  7. Demir, A., Yildiz, A., Laman, M. and Ornek, M. (2014), "Experimental and numerical analyses of circular footing on geogrid-reinforced granular fill underlain by soft clay", Acta Geotechnica. 9(4), 711-723. https://doi.org/10.1007/s11440-013-0207-x
  8. Dey, A. (2010), "Bearing capacity of reinforced foundations: statistical approach and sensitivity analysis", Proc. Soc. Behav. Sci., 2(6), 7642-7643. https://doi.org/10.1016/j.sbspro.2010.05.157
  9. Dong-ping, D., Liang, L., Jian-feng, W. and Lian-heng, Z. (2016), "Limit equilibrium method for rock slope stability analysis by using the Generalized Hoek-Brown criterion", J. Rock Mech. Min. Sci., (89), 176-184.
  10. El Sawwaf, M.A. (2007), "Behavior of strip footing on geogridreinforced sand over a soft clay slope", Geotext. Geomembr., 25(1), 50-60. https://doi.org/10.1016/j.geotexmem.2006.06.001
  11. Fahimifar, A., Abdolmaleki, A. and Soltani, P. (2014), "Stabilization of rock slopes using geogrid boxes", Arab. J. Geosci., 7(2), 609-621. https://doi.org/10.1007/s12517-012-0755-7
  12. Fattah, M.Y., Al-Shakarchi, Y.J. and Al-Hadidi, M.T. (2012), "A procedure for analysing reinforced embankments", Arab. J. Sci. Eng., 37(6), 1547-1555. https://doi.org/10.1007/s13369-012-0269-3
  13. Hirofumi, F., Jun'ichi, N. and Koichi, T. (2003), "A study on the scale effect of ultimate bearing capacity on rock fill", Mon. Rep. Civ. Eng. Res. Inst., 600, 21-28.
  14. Hou, J., Zhang, M.X., Dai, Z.H., Li, J.Z. and Zeng, F.F. (2017), "Bearing capacity of strip foundations in horizontal-vertical reinforced soils", Geotext. Geomembr., 45(1), 29-34. https://doi.org/10.1016/j.geotexmem.2016.07.001
  15. Huang, C.C. and Tatsuoka, F. (1990), "Bearing capacity of reinforced horizontal sandy ground", Geotext. Geomembr., 9(1), 51-82. https://doi.org/10.1016/0266-1144(90)90005-W
  16. Jaeger, J.C., Cook, N.G.V. and Zimmerman, R. (2009), Fundamentals of Rock Mechanics, John Wiley & Sons, New York, U.S.A.
  17. Janbu, N. (1954), "Applications of composite slip surfaces for stability analysis", Proceedings of the European Conference on Stability of Earth Slope, Stockholm, Sweden, September.
  18. Keskin, M.S. and Laman, M. (2014), "Experimental and numerical studies of strip footings on geogrid-reinforced sand slope", Arab. J. Sci. Eng., 39(3), 1607-1619. https://doi.org/10.1007/s13369-013-0795-7
  19. Keskin, M.S. and Laman, M. (2014), "Experimental study of bearing capacity of strip footing on sand slope reinforced with tire chips", Geomech. Eng., 6(3), 249-262. https://doi.org/10.12989/gae.2014.6.3.249
  20. Kumar, A. and Saran, S. (2003), "Bearing capacity of rectangular footing on reinforced soil", Geotech. Geol. Eng., 21(3), 201-224. https://doi.org/10.1023/A:1024927810216
  21. Li, D.Q., Xiao, T., Cao, Z.J., Phoon, K.K. and Zhou, C.B. (2016), "Efficient and consistent reliability analysis of soil slope stability using both limit equilibrium analysis and finite element analysis", Appl. Math. Model., 40(9-10), 5216-5229. https://doi.org/10.1016/j.apm.2015.11.044
  22. Liu, S., Huang, H., Qiu, T. and Kwon, J. (2016), "Effect of geogrid on railroad ballast particle movement", Transport. Geotech., 9 110-122. https://doi.org/10.1016/j.trgeo.2016.08.003
  23. Omar, M.T., Das, B.M., Puri, V.K. and Yen, S.C. (1993), "Ultimate bearing capacity of shallow foundations on sand with geogrid reinforcement", Can. Geotech. J., 30(3), 545-549. https://doi.org/10.1139/t93-046
  24. Selvadurai, P.S. and Gnanendran, C.T. (1989), "An experimental study of a footing located on a sloped fill: Influence of a soil reinforcement layer", Can. Geotech. J., 26(3), 467-473. https://doi.org/10.1139/t89-059
  25. Shin, E.C. and Das, B.M. (1998), "Ultimate bearing capacity of strip foundation on geogrid-reinforced clay slope", KSCE J. Civ. Eng., 2(4), 481-488. https://doi.org/10.1007/BF02830129
  26. Touze-Foltz, N., Bannour, H., Barral, C. and Stoltz, G. (2016), "A review of the performance of geosynthetics for environmental protection", Geotext. Geomembr., 44(5), 656-672. https://doi.org/10.1016/j.geotexmem.2016.05.008
  27. Turker, E., Sadoglu, E., Cure, E. and Uzuner, B.A. (2014), "Bearing capacity of eccentrically loaded strip footings close to geotextile-reinforced sand slope", Can. Geotech. J., 51(8), 884-895. https://doi.org/10.1139/cgj-2014-0055
  28. Vesic, A.S. (1974), "Analysis of ultimate loads of shallow foundations", J. Rock Mech. Min. Sci. Geomech. Abstr., 11(11), A230.
  29. Yoo, C. (2001), "Laboratory investigation of bearing capacity behavior of strip footing on geogrid-reinforced sand slope", Geotext. Geomembr., 19(5), 279-298. https://doi.org/10.1016/S0266-1144(01)00009-7
  30. Zhang, Y., Andersen, K.H. and Tedesco, G. (2016), "Ultimate bearing capacity of laterally loaded piles in clay-some practical considerations", Mar. Struct., 50, 260-275. https://doi.org/10.1016/j.marstruc.2016.09.002
  31. Zhao, A. (1996), "Limit analysis of geosynthetic-reinforced soil slopes", Geosynth., 3(6), 721-740. https://doi.org/10.1680/gein.3.0082
  32. Zornberg, J.G., Sitar, N. and Mitchell, J.K. (1998), "Limit equilibrium as basis for design of geosynthetic reinforced slopes", J. Geotech. Geoenviron. Eng., 124(8), 684-698. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:8(684)
  33. Zornberg, J.G., Sitar, N. and Mitchell, J.K. (1998), "Performance of geosynthetic reinforced slopes at failure", J. Geotech. Geoenviron. Eng., 124(8), 670-683. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:8(670)