DOI QR코드

DOI QR Code

Ice forces acting on towed ship in level ice with straight drift. Part I: Analysis of model test data

  • Zhou, Li (School of Naval Architecture and Ocean Engineering, Jiangsu University of Science and Technology) ;
  • Chuang, Zhenju (DNV GL) ;
  • Ji, Chunyan (School of Naval Architecture and Ocean Engineering, Jiangsu University of Science and Technology)
  • Received : 2016.11.03
  • Accepted : 2017.03.13
  • Published : 2018.01.31

Abstract

A series of tests in an ice tank was carried out using a model-scale ship to investigate the ice loading process. The ship model Uikku was mounted on a rigid carriage and towed through a level ice field in the ice tank of the Marine Technology Group at Aalto University. The carriage speed and ice thickness were varied. In this paper, ice loading process was described and the corresponding ice forces on the horizontal plane were analysed. A new method is proposed to decompose different ice force components from the total ice forces measured in the model tests. This analysis method is beneficial to understanding contributions of each force component and modelling of ice loading on hulls. The analysed experimental results could be used for comparison with further numerical simulations.

Keywords

References

  1. Aksnes, V., 2010. A panel method for modeling level ice actions on moored ships. Part 1: local ice force formulation. Cold Regions Sci. Technol. 63, 29-39. https://doi.org/10.1016/j.coldregions.2010.05.002
  2. Aksnes, V., Bonnemaire, B., 2009. Analysis of the behavior of a moored ship in variable ice. In: Proceedings of the 20th International Conference on Port and Ocean Engineering under Arctic Conditions, Lulea, Sweden (POAC09-25).
  3. Comfort, G., 2001. Moored vessel station-keeping in ice-infested waters. An assessment of model test data for various structures and ship shapes. In: The International Conference on Port and Ocean Engineering under Arctic Conditions (POAC'01), Ottawa, Ontario, Canada.
  4. Comfort, G., Singh, S., Spencer, D., 1999. Evaluation of Ice Model Test Data for Moored Structures (PERD/CHC report), pp. 26-195.
  5. Enkvist, E., Varsta, P., Riska, K., 1979. The ship-ice interaction. In: The International Conference on Port and Ocean Engineering under Arctic Conditions (POAC), Trondheim, vol. 2, pp. 977-1002.
  6. Hu, J., Zhou, L., 2015. Experimental and numerical study on ice resistance for icebreaking vessels. Int. J. Naval Archit. Ocean Eng. 7 (3), 626-639. https://doi.org/10.1515/ijnaoe-2015-0044
  7. Hu, J., Zhou, L., 2016. Further study on level ice resistance and channel resistance for an icebreaking vessel. Int. J. Naval Archit. Ocean Eng. 8 (2), 169-176. https://doi.org/10.1016/j.ijnaoe.2016.01.004
  8. Keinonen, A.J., Browne, R., Revill, C., Reynolds, A., 1996. Icebreaker Characteristics Synthesis (Report for the Transportation Development Centre, Transport Canada, Report TP 12812E).
  9. Kotras, T.V., Baird, A.V., Naegle, J.N., 1983. Predicting ship performance in level ice. Soc. Naval Archit. Mar. Eng. Trans. 95, 329-349.
  10. Lewis, J.W., Edwards, Y., 1970. Methods for predicting icebreaking and ice resistance characteristics of icebreakers. SNAME Trans. 78, 213-249.
  11. Lindqvist, G., 1989. A straightforward method for calculation of ice resistance of ships. In: Proceedings of International Conference on Port and Ocean Engineering under Arctic Conditions (POAC), pp. 722-735.
  12. Riska, K., Wilhelmson, M., Englund, K., Leiviska, T., 1997. Performance of Merchant Vessels in the Baltic (Research report no 52). Winter Navigation Research Board.
  13. Wright, B., 1999. Evaluation of Full Scale Data for Moored Vessel Stationkeeping in Pack Ice (PERD/CHC report 26-200). Ottawa, Canada.
  14. Zhou, L., Riska, K., Moan, T., Su, B., 2013b. Numerical modeling of ice load on an icebreaking tanker: comparing simulations with model tests. Cold Regions Sci. Technol. 87, 33-46. https://doi.org/10.1016/j.coldregions.2012.11.006
  15. Zhou, L., Riska, K., von Bock und Polach, R., Moan, T., Su, B., 2013a. Experiments on level ice loading on an icebreaking tanker with different ice drift angles. Cold Regions Sci. Technol. 85, 79-93. https://doi.org/10.1016/j.coldregions.2012.08.006
  16. Zhou, L., Su, B., Riska, K., Moan, T., 2012. Numerical simulation of moored structure station keeping in level ice. Cold Regions Sci. Technol. 71, 54-66. https://doi.org/10.1016/j.coldregions.2011.10.008

Cited by

  1. Ice forces acting on towed ship in level ice with straight drift. Part II: Numerical simulation vol.10, pp.2, 2018, https://doi.org/10.1016/j.ijnaoe.2017.06.001
  2. A numerical study on ice failure process and ice-ship interactions by Smoothed Particle Hydrodynamics vol.11, pp.2, 2018, https://doi.org/10.1016/j.ijnaoe.2019.02.008
  3. A Simulation of Non-Simultaneous Ice Crushing Force for Wind Turbine Towers with Large Slopes vol.12, pp.13, 2018, https://doi.org/10.3390/en12132608
  4. Research on total resistance of ice-going ship for different floe ice distributions based on virtual mass method vol.12, pp.None, 2020, https://doi.org/10.1016/j.ijnaoe.2020.11.006
  5. Calculation Methods of Icebreaking Capability for a Double-Acting Polar Ship vol.8, pp.3, 2020, https://doi.org/10.3390/jmse8030179
  6. Experimental Research of Hull Vibration of a Full-Scale River Icebreaker vol.19, pp.2, 2020, https://doi.org/10.1007/s11804-020-00137-3
  7. Formulation of Ice Resistance in Level Ice Using Double-Plates Superposition vol.8, pp.11, 2020, https://doi.org/10.3390/jmse8110870
  8. Numerical Research on Global Ice Loads of Maneuvering Captive Motion in Level Ice vol.9, pp.12, 2018, https://doi.org/10.3390/jmse9121404