Acknowledgement
Supported by : 한국연구재단
References
- ACI 408R-03, (2003). Bond and development of straight reinforcing bars in tension, ACI Committee 408, American Concrete Institute, Farmington Hills, MI, 49.
- Azizinamini, A., Stark, M., Roller, J. J., & Ghosh, S.K., (1993). Bond performance of reinforcing bars embedded in High-Strength Concrete, ACI Structural Journal, 90(5), 554-561.
- Aldejohann, M., & Schnellenbach-Held, M., (2003). Investigations on the shear capacity of biaxial hollow slabs-test results and evaluation, Darmstadt Concrete, 18, 1-11.
- CEB-FIP, (2010). Model code for concrete structures, Comite Euro-International du Beton, c/o Thomas Telford, London.
- Chung, J. H., Kang, S. H., Lee, S. C., Choi, C. S., & Choi, H. K., (2013). An experimental study for bond characteristics of deformed bar embedded in donut type biaxial hollow slab, Journal of the Korea Concrete Institute, 25(2), 155-163. (in Korean) https://doi.org/10.4334/JKCI.2013.25.2.155
- Jung, J. H., Kang, H., Ahn, J. M., & Shin, S. W., (2008). Bond characteristics of the reinforcement embedded in ultra high-strength concrete according to the concrete cover, Journal of the Architectural Institute of Korea Structure & Construction, 24(10), 45-52.
- Kokubu, M. & Okamura, H., (1972). Use of large-sized formed bars in reinforced concrete, Proceedings of the Japan Society of Civil Engineers, 1972(202), 103-113. https://doi.org/10.2208/jscej1969.1972.202_103
- Korean Agency for Technology and Standards, (2003). Method of tensile test for metallic materials, KS B 0802, 1-7.
- Korean Agency for Technology and Standards, (2014). Low carbon steel wires, KS D 3552, 1-17. (in Korean)
- Korean Agency for Technology and Standards, (2010). Standard Test Method for Compressive Strength of Concrete, KS F 2405, 1-16.
- Korean Agency for Technology and Standards, (2010). Standard Test Method for Comparing Concrete on the Basis of the Bond Developed with Reinforcing Steel, KS F 2441, 1-7.
- Rehm, G., (1969). Kriterien zur beurteilung von bewehrungsstaben mit hochwertigem Verbund, Stahlbau, Berichte aus Forschung und Praxis, Berlin, 79-96.
- Soretz, S., & Holzenbein, H., (1979). Influence of Rib Dimensions of Reinforcing Bars on Bond and Bendability, ACI Journal, 76(1), 111-127.
- Yamao H., Chou L. & Niwa J., (1984). Experimental study on bond stress-slip relationship, Proceedings of JSCE, (3430, 219-228. (in Japanese)
- Zuo, J., & Darwin, D., (1998). Bond strength of high relative rib area reinforcing bars, SM Report, 46, University of Kansas Center for Research, 350.