Figure 1. CO2 adsorption test results for pinewood activated carbons.
Figure 2. CO2 adsorption test results for coal activated carbons.
Figure 3. CO2 adsorption capacity with the BET surface area of pinewood activated carbon.
Figure 4. CO2 adsorption capacity with the micropore volume of pinewood activated carbon.
Figure 5. CO2 adsorption capacity with the mesopore volume of pinewood activated carbon.
Figure 6. CO2 adsorption capacity with the BET surface area of coal activated carbon.
Figure 7. CO2 adsorption capacity with the micropore volume of coal activated carbon.
Figure 8. CO2 adsorption capacity with the mesopore volume of coal activated carbon.
Figure 9. CO2 adsorption capacity with the BET surface area of pinewood and coal activated carbon.
Figure 10. CO2 adsorption capacity with the micropore volume of pinewood and coal activated carbon.
Figure 11. CO2 adsorption capacity with the mesopore volume of pinewood and coal activated carbon.
Table 1. Physical properties of the prepared activated carbons [19]
References
- EIA., "Emission of Greenhouse Gases in the United States," DOE/EIA-0573, U. S. Energy Information Administration (2009).
- Choi, S., Jeffrey, H., Drese, H. J., and Jones, C. W., "Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources," ChemSusChem, 2(9), 796-854 (2009). https://doi.org/10.1002/cssc.200900036
-
Rochelle, G. T., "Amine Scrubbing for
$CO_2$ Capture," Science, 325(5948), 1652-1654 (2009). https://doi.org/10.1126/science.1176731 -
Veltman, K., Singh, B., and Hertwich., E. G., "Human and Environmental Impact Assessment of Postcombustion
$CO_2$ Capture Focusing on Emissions from Amine-Based Scrubbing Solvents to Air," Environ. Sci. Technol., 44(4), 1496-1502 (2010). https://doi.org/10.1021/es902116r -
Yu, C. H., Huang, C. H., and Tan., C. S., "A Review of
$CO_2$ Capture by Absorption and Adsorption," Aerosol Air Qual. Res., 12(5), 745-769 (2012). https://doi.org/10.4209/aaqr.2012.05.0132 - Creamer, A. E., Gao, B., and Zhang, M., "Carbon Dioxide Capture Using Biochar Produced from Sugarcane Bagasse and Hickory Wood," Chem. Eng. J., 249, 174-179 (2014). https://doi.org/10.1016/j.cej.2014.03.105
-
Huang, Y. F., Chiueh, P. T., Shih, C. H., Lo, S. L., Sun, L., Zhong, Y., and Qiu, C., "Microwave Pyrolysis of Rice Straw to Produce Biochar as an Adsorbent for
$CO_2$ Capture," Energy, 84, 75-82 (2015). https://doi.org/10.1016/j.energy.2015.02.026 - Creamer, A. E., Gao, B., and Wang, S., "Carbon Dioxide Capture Using Various Metal Oxyhydroxide-Biochar Composites," Chem. Eng. J., 283, 826-832 (2016).
-
Zhang, Y., Maroto-Valer, M. M., and Tang, Z., "Microporous Activated Carbons Produced from Unburned Carbon in Fly Ash and their Application For
$CO_2$ Capture," Fuel Chem. Div. Prepr., 49(1), 304-305 (2004). -
Plaza, M. G., Pevida, C., Arias, B., Fermoso, J., Casal, M. D., Martin, C.-F., Rubiera, F., and Pis, J. J., "Development of Low-Cost Biomass-Based Adsorbents for Postcombustion
$CO_2$ Capture," Fuel, 88(12), 2442-2447 (2009). https://doi.org/10.1016/j.fuel.2009.02.025 - Radosz, M., Hu, X., Krutkramelis, K., and Shen, Y., "Flue- Gas Carbon Capture on Carbonaceous Sorbents: Toward a Low-Cost Multifunctional Carbon Filter for "Green" Energy Producers," Ind. Eng. Chem. Res., 47(10), 3783-3794 (2008). https://doi.org/10.1021/ie0707974
-
Xiong, Z., Shihong, Z., Haiping, Y., Tao, S,. Chen Yingquan., and Hanping, C., "Influence of
$NH_3$ /$CO_2$ Modification on the Characteristic of Biochar and the$CO_2$ Capture," Bioenergy Res., 6(4), 1147-1153 (2013). https://doi.org/10.1007/s12155-013-9304-9 -
Fan, X., Zhang, L., Zhang, G., Shu, Z., and Shi, J., "Chitosan Derived Nitrogen-Doped Microporous Carbons for High Performance
$CO_2$ Capture," Carbon, 61, 423-430 (2013). -
Liu, L., Deng, Q. F., Ma, T. Y., Lin, X. Z., Hou, X. X., Liu, Y. P., and Yuan, Z. Y.,"Ordered Mesoporous Carbons: Citric Acid-Catalyzed Synthesis, Nitrogen Doping and
$CO_2$ Capture," J. Mater. Chem., 21(40), 16001-16009 (2011). https://doi.org/10.1039/c1jm12887f -
Zhao, Y., Zhao, L., Yao, K. X., Yang, Y., Zhang, Q., and Han, Y., "Novel Porous Carbon Materials with Ultrahigh Nitrogen Contents for Selective
$CO_2$ Capture," J. Mater. Chem., 22(37), 19726-19731 (2012). https://doi.org/10.1039/c2jm33091a -
Sevilla, M., and Fuertes, A. B., "Sustainable Porous Carbons with a Superior Performance for
$CO_2$ Capture," Energy Environ. Sci., 4(5), 1765-1771 (2011). https://doi.org/10.1039/c0ee00784f -
Hao, W., Bjorkman, E., Lilliestrale, M., and Hedin, N., "Activated Carbons Prepared from Hydrothermally Carbonized Waste Biomass used as Adsorbents for
$CO_2$ ," Appl. Energy, 112, 526-532 (2013). https://doi.org/10.1016/j.apenergy.2013.02.028 - Presser, V., McDonough, J., Yeon, S. H., and Gogotsi, Y., "Effect of Pore Size on Carbon Dioxide Sorption by Carbide Derived Carbon," Energy Environ. Sci., 4(8), 3059-3066 (2011). https://doi.org/10.1039/c1ee01176f
- Min, H., Ahmad, T., and Lee, S. S., "Mercury Adsorption Characteristics as Dependent upon the Physical Properties of Activated Carbon," Energy Fuels, 31(1), 724-729 (2017). https://doi.org/10.1021/acs.energyfuels.6b02246
- Min, H., Ahmad, T., Park, M., and Lee, S. S., "Physical Property with the Manufacturing Conditions of Activated Carbon for Mercury Adsorption," J. Korean Soc. Atmos. Environ., 31(3), 302-314 (2015). https://doi.org/10.5572/KOSAE.2015.31.3.302
Cited by
- 지속가능 에너지 패러다임 변화속에서 석탄의 활용 vol.53, pp.6, 2020, https://doi.org/10.9719/eeg.2020.53.6.793