DOI QR코드

DOI QR Code

A Study on Characteristics of Dimensional Accuracy using Planning Number of Machining in Machining Center

머시닝센터 평면가공 시 가공횟수에 따른 치수정밀도 특성에 관한 연구

  • Yang, Yong-Mo (Department of Computer Applied Machinery, Korea Polytechnic College Dongbusan Campus)
  • 양용모 (한국폴리텍대학 동부산캠퍼스 컴퓨터응용기계과)
  • Received : 2018.09.30
  • Accepted : 2018.09.13
  • Published : 2018.12.31

Abstract

The face milling cutter, which is mainly used for the face milling, is used to cut the Carbon steel(SM20C) in the machining center for 5 times and 10 times respectively. This study clarify the dimensional accuracy characteristics according to the number of fine machining varied the condition of cutting depth, table feed speed and spindle speed. Cutting depth is varied 0.05~0.2mm, table feed speed is varied 0.05~0.2mm/min and spindle speed is varied 1500~2500rpm. As a result, the dimensional accuracy was stable 6 times machining with table feed speed 150mm/min and 10 times machining with table speed 100mm/min and cutting depth 0.05mm regardless times of machining.

Keywords

References

  1. Seo, S. W., Kim, D. H., Kim, S. Jin., "A Study on the Linear Compensation Method of Ideal Surface Roughness to Actual Roughness in Milling", Journal of the Korean society of machine tool engineers, Vol. 15, No. 3, pp. 15-20, 2017.
  2. Jang S. M., Baek, S. Y., "A Study on the Analysis of Tool-wear Patterns and Mechanisms in Face Milling" ournal of the Korean society of machine tool engineers, Vol. 16, No. 4, pp. 24-29, 1998.
  3. Yoon, J. H., Lee, J. W., Jung, K. Y. Jung, M. S., "Cutting Condition for Improving Cutting Efficiency and Accuracy by Ball Endmill on a Machining Center",Journal of the Korean society of machine tool engineers", Vol. 7, No. 3, pp. 99-103, 1998.
  4. Park, J. N., Cho, G. J. and Lee, S. C. "A Study on the Cutting Characteristics of Ti-6Al-4V Alloy in Turning Operation", Journal of the Korean Society of Manufacturing Technology, Vol. 3, No. 4, pp. 81-87, 2004.
  5. Seong, C. H., Kim, H. C. and Kim, K. S., "Characteristics of Surface Roughness in the High Speed Micro Turning of Aluminum Alloy", Journal of the Korean Society of Precision Engineering, Vol. 16, No. 7, pp. 94-100, 1999.
  6. Jun, J. U., Chung, J. S. and Ha, M. K., "Analysis of Cutting Specific in Non-ferrous Metal by Changed rake-angle and feed-rate adjustment at Turning", Journal of the Korean society of machine tool engineers, Vol. 10, No. 4, pp. 1-6, 2001.
  7. Choi, J. G., Kim, H. S. and Kim, S. C. "A Study on the Optimum Finish Allowance for Machining Accuracy Improvement in the End Milling Processes", Journal of the Korean society of machine tool engineers, Vol. 13, No. 3, pp. 8-14, 2004.
  8. Chung, M. S., "A Study on Transition of Dimension Error and Surface Precision in High Speed Machining of AI-alloy", Vol. 9, No. 3, pp. 96-102, 2000.
  9. Yoon, J. H., Seo, S. W. and Lee, H. C., "A Study on the Effect of Dimensional Errors and Roundness in High Speed Cylindrical Machining of Al-alloy" Journal of the Korean society of machine tool engineers Vol. 10, No. 5, pp. 17-27, 2001.
  10. Jung, P. G., Bae, G. H. and Hong, S. W., "A Study on the Performance of Atomic Force Probe for coordinate Measuring Machines", Journal of the Korean society of machine tool engineers, Vol. 17, No. 1, pp. 75-80, 2008.
  11. Lee, D. J. and Kim, H. J., "3D precision coordinate measurement technology and trend", Journal of the Korean society of machine tool engineers, Vol. 11, No. 2, pp. 7-14, 2002.

Cited by

  1. SCM415강의 원형포켓 가공시 치수정밀도에 관한 연구 vol.18, pp.9, 2019, https://doi.org/10.14775/ksmpe.2019.18.9.058