DOI QR코드

DOI QR Code

Design and Implementation of Parametric Modeler for Retractable Roof Three-Dimensional Truss

개폐식 지붕 입체트러스를 위한 파라메트릭 모델러의 설계와 구현

  • Jeong, Jin-Young (Department of Architectural Engineering, Dankook Univ.) ;
  • Joung, Bo-Ra (Department of Architectural Engineering, Dankook Univ.) ;
  • Kim, Chee-Kyeong (Department of Architectural Engineering, Dankook Univ.) ;
  • Lee, Si Eun (Department of Information & Communication System, BaekSeok Univ.) ;
  • Kim, Si-Uk (Department of Architectural Engineering, Dankook Univ.)
  • 정진영 (단국대학교 건축공학과) ;
  • 정보라 (단국대학교 건축공학과) ;
  • 김치경 (단국대학교 건축공학과) ;
  • 이시은 (백석대학교 정보통신학부) ;
  • 김시욱 (단국대학교 건축공학과)
  • Received : 2017.08.01
  • Accepted : 2017.12.04
  • Published : 2018.02.28

Abstract

The purpose of this study is to implement modeling by applying the parametric technique to the atypical trusses of rigid retractable large space structures. The retractable large space structure requires a lot of time and skill in modeling nonlinear shapes or generating, interpreting, and reviewing many models by alternative. To solve these problems, we introduce firstly parametric modeling tool, secondly, we analyze the connection of atypical three-dimensional trusses of a rigid retractable large-space structure, and finally model it as parametric components of the developed trusses. Therefore, it is a future study to make effective modeling of the openable roof by developing the components that can realize the modeling of the truss classified by the opening and closing method, respectively.

본 연구의 목적은 강성 개폐식 대공간 건축물의 비정형 입체트러스를 파라메트릭 기법을 적용하여 모델링을 구현하는데 있다. 개폐식 대공간 건축물은 비선형성 형상을 모델링하거나 다수의 모델을 대안별로 생성, 해석, 검토하는 과정에 많은 시간과 기술이 소요되는 것이 현 실정이다. 이러한 문제점을 해결하기 위해서 첫째로, 개발에 사용된 파라메트릭 모델링 전산도구를 소개하고, 강성 개폐식 대공간 건축물의 비정형 입체트러스를 분석하며, 개발한 입체트러스의 파라메트릭 컴포넌트로 모델링을 구현하게 된다. 따라서 지붕이 개폐되는 방식으로 구분한 입체 트러스 종류의 모델링을 구현해 낼 수 있는 컴포넌트를 형상이나 기능에 따른 각각 대안별로 개발하여 효율적인 개폐식 지붕의 모델링을 가능하게 하는 것이 추후 연구사항이다.

Keywords

References

  1. Choi, H.C. (2014) The Parametric Structural Optimization with StrAuto, Rev. Archi. & Build. Sci., 58(2), pp.50-54.
  2. Choi, H.C., Lee, S.E., Kim, C.K. (2016) Development of a Parametric Design System for Membrane Structures, J. Korean Assoc. Spat. Struct., 16(3), pp.29-36. https://doi.org/10.9712/KASS.2016.16.4.029
  3. Choi, H.C., Lee, S.E., Kim, C.K. (2017) Parametric Design Process for Structural Quantity Optimization of Spatial Building Structures, J. Comput. Struct. Eng. Inst. Korea, 30(2), pp.103-110. https://doi.org/10.7734/COSEIK.2017.30.2.103
  4. Kang, J.W., Kim, G.C., Kim, H.S., Seok, G.Y. (2014) The Present and Future of Retractable Roof Structures, J. Korean Assoc. Spat. Struct., 14(3), pp.24-31.
  5. Kim, C.K., Lee, S.S., Choi, H.C. (2010) A Study on Parametric Modeler to Generate Structural Analysis Model, Proc. Annual Conf. Computational Struct. Eng. Inst. Korea, 23(1), pp.247-250.
  6. Kim, Y.M., Kim, C.K., Choi, H.C. (2012) Selection of Optimal Structural System for Complex-shaped Super-tall Building Structural Systems Using Parametric Design Technique, J. Archi. Inst. Korea Struct. & Constr., 28(1), pp.77-84. https://doi.org/10.5659/JAIK_SC.2012.28.1.77
  7. Kim, Y.M., Lee, S.G., Kim, C.K., Choi, H.C. (2012) A Case Study on the Field Application of Parametric Design Technique for Optimization of Outrigger System High-rise Building Structures, J. Archi. Inst. Korea, 28(12), pp.45-52.
  8. Na, Y.M., Lee, J.H., Kang, J.W. (2012) Interface Technique for Optimization of Free-form Structural System, J. Korean Assoc. Spat. Struct., 12(1), pp.43-50. https://doi.org/10.9712/KASS.2012.12.1.043
  9. Park, K.G., Lee, D.W. (2016) A Study on the Structural System of Retractable Large Span Cable Structures, Proc. Korean Assoc. Spat. Struct. 2016 Spring Conf., 12(1), pp.61-62.
  10. Richard, B., David, C., Mousa, G., Amir, M., Patrick, T. (2016) Special Structures: Past, Present, and Future, J. Struct. Eng., 29(5), pp.447-454.
  11. Song, C.H., Kim, C.K., Lee, S.E., Choi, H.C. (2016) Establishment of Rebar Quantity Estimation in BIM-based Initial Design Phase, J. Comput. Struct. Eng. Inst. Korea, 29(5), pp.103-110.