DOI QR코드

DOI QR Code

Class-E Power Amplifier with Minimal Standby Power for Wireless Power Transfer System

  • Kim, Bong-Chul (Dept. of System Engineering and Development, Power Supply Technology Team, National Fusion Research Institute) ;
  • Lee, Byoung-Hee (Dept. of Electronics and Control Engineering, Hanbat National University)
  • 투고 : 2017.01.23
  • 심사 : 2017.09.09
  • 발행 : 2018.01.01

초록

This paper presents a method for minimizing standby power consumption in wireless power transfer (WPT) system via magnetic resonance coupling (MRC) that operates at 6.78 MHz. The proposed circuit controls the required capacitance according to operational condition in order to reduce standby power consumption. Based on an impedance characteristic of the class-E power amplifier, operational principles of the proposed circuit are analyzed. Moreover, to verify the effectiveness of the proposed class-E power amplifier, an 8 W prototype for WPT system is implemented. The measured input power of the proposed class-E power amplifier at standby condition is reduced from 5.81 W to 3.53 W.

키워드

E1EEFQ_2018_v13n1_250_f0001.png 이미지

Fig. 1 The structure of the conventional WPT system : (a)At charging mode (b) At standby mode

E1EEFQ_2018_v13n1_250_f0002.png 이미지

Fig. 2. Ropt and Xopt according to output power

E1EEFQ_2018_v13n1_250_f0003.png 이미지

Fig. 3. Total output impedance of power amplifier

E1EEFQ_2018_v13n1_250_f0004.png 이미지

Fig. 4. The structure of the proposed WPT system

E1EEFQ_2018_v13n1_250_f0005.png 이미지

Fig. 5. The output power according to Cd

E1EEFQ_2018_v13n1_250_f0006.png 이미지

Fig. 6. The output impedance according to CO

E1EEFQ_2018_v13n1_250_f0007.png 이미지

Fig. 7. Experimental waveforms of the WPT system: (a) Atcharging mode; (b) Conventional WPT system atstandby mode; (c) Proposed WPT system at standbymode

Table 1. System specifications

E1EEFQ_2018_v13n1_250_t0001.png 이미지

Table 2. Circuit parameters

E1EEFQ_2018_v13n1_250_t0002.png 이미지

Table 3. Comparison of power loss

E1EEFQ_2018_v13n1_250_t0003.png 이미지

참고문헌

  1. Mike Gikas, "Smartphones With the Best Battery Life," Consumer Reports, March 2016. [Online] Available:http://www.consumerreports.org/smartphones/smartphones-with-the-best-battery-life/
  2. MarketsAndMarkets, "Wireless Power Transmission Market by Technology (Induction & Magnetic Resonance), Implementation, Receiver & Transmitter Application (Smartphones, Wearable Electronics, Electric Vehicles, & Furniture), and Region - Global Trend & Forecast to 2020," Reports, Jan. 2016.
  3. Wireless Power Consortium (WPC) [Online] Available: https://www.wirelesspowerconsortium.com/
  4. AirFuel [Online] Available: http://airfuel.org/
  5. Huy Hoang, Seunggyu Lee, Youngsu Kim, Yunho Choi and Franklin Bien, "An Adaptive Technique to Improve Wireless Power Transfer for Consumer Electronics," IEEE Trans. Consumer Electronics, vol. 58, no. 2, pp. 327-332, May 2012. https://doi.org/10.1109/TCE.2012.6227430
  6. Hyeonseok Hwang, Junil Moon, Bumsoo Lee, Chan- Hui Jeong and Soo-Won Kim, "An Analysis of Magnetic Resonance Coupling Effects on Wireless Power Transfer by Coil Inductance and Placement," IEEE Trans. Consumer Electronics, vol. 60, no. 2, pp. 203-209, May 2014. https://doi.org/10.1109/TCE.2014.6851995
  7. Andre Kirs, Aristeidis Karalis, Robert Moffatt, J. D. Joannopoulos, Peter Fisher and Marin Soljacic, "Wireless Power Transfer via Strongly Coupled Magnetic Resonances," Science, vol. 317, Issue. 5834, pp. 83-86, July 2007. https://doi.org/10.1126/science.1143254
  8. Teck Chuan Beh, Masaki Kato, Takehiro Imura, Sehoon Oh and Yoichi Hori, "Automated Impedance Matching System for Robust Wireless Power Transfer via Magnetic Resonance Coupling," IEEE Trans. Industrial Electronics, vol. 60, no. 9, pp. 3689-3698, Sept. 2013. https://doi.org/10.1109/TIE.2012.2206337
  9. Gary Hanington, Pin-Fan Chen, Peter M. Asbeck and Lawrence E. Larson, "High-Efficiency Power Amplifier Using Dynamic Power-Supply Voltage for CDMA Applications," IEEE Trans. Microwave Theory and Technique, vol. 47, no. 8, pp. 1471-1476, Aug. 1999. https://doi.org/10.1109/22.780397
  10. Petteri Alinikula, Kevin Choi and Stephen I. Long, "Design of Class E Power Amplifier with Nonlinear Parasitic Output Capacitance," IEEE Trans. Circuits and Systems II, vol. 46, no. 2, pp. 114-119, Feb. 1999. https://doi.org/10.1109/82.752911
  11. Andrea Mazzanti, Luca Larcher, Riccardo Brama and Francesco Svelto, "Analysis of Reliability and Power Efficiency in Cascade Class-E PAs," IEEE Journal of Solid-State Circuits, vol. 41, no. 5, pp. 1222-1229, May 2006. https://doi.org/10.1109/JSSC.2006.872734
  12. Joaquin J. Casanova, Zhen Ning Low and Jenshan Lin, "Design and Optimization of a Class-E Amplifier for a Loosely Coupled Planar Wireless Power System," IEEE Trans. Circuits and Systems II, vol. 56, no. 11, pp.830-834, Nov. 2009. https://doi.org/10.1109/TCSII.2009.2032465
  13. Renato Negra and Werner Bachtold, "Lumped- Element Load-Network Design for Class-E Power Amplifiers," IEEE Trans. Microwave Theory and Techniques, vol. 54, no. 6, pp.2684-2690, Jun. 2006. https://doi.org/10.1109/TMTT.2006.874864
  14. Chwei-Sen Wang, Oskar H. Stielau and Grant A, Covic, "Design Considerations for a Contactless Electric Vehicle Battery Charger," IEEE Trans. Industrial Electronics, vol. 52, no. 5, pp. 1308-1314, Oct. 2005. https://doi.org/10.1109/TIE.2005.855672
  15. Byoung-Hee Lee, Yeon-Woo Choi and Bong-Chul Kim, "Standby Power Reduction Method for Wireless Power Transfer System with Parallel Resonance Type Resonator," in Proceedings of IEEE WPTC 2016 Conference, Aveiro, Portugal, May 2016.
  16. Jong-Ryul Yang, Hyoen-Chang Son and Young-Jin Park, "A CLASS E POWER AMPLIFIER WITH COUPLING COILS FOR A WIRELESS POWER TRANSFER SYSTEM," Progress In Electromagnetics Research C, vol. 35, pp. 13-22, 2013. https://doi.org/10.2528/PIERC12100914
  17. Datasheet FDMC86116LZ. (2013). [Online] Available: http://www.onsemi.com/pub/Collateral/FDMC86116 LZ-D.pdf