Fig. 1. Photograph of test fuel cell, (a) front-view, (b) top-view, (c) cathode-view, (d) anode-view
Fig. 2. Vibration experiment equipment
Fig. 3. Fuel cell performance evaluation equipment
Fig. 4. Experimental process for vibration test
Fig. 5. Gas tightness variation after vibration test
Fig. 6. Polarization curve variation after vibration test
Fig. 7. FRA variation after vibration test
Table 1. Standard related to fuel cells safety6-11)
Table 2. Summary of standard assessments list for fuel cells6-11)
Table 3. Operational conditions for polarization curve
Table 4. Operational conditions for FRA
참고문헌
- X. Wang, S. Wang, S. Chen, T. Zhu, X. Xie, and Z. Mao, "Dynamic response of proton exchange membrane fuel cell under mechanical vibration", International Journal Of Hydrogen Energy, Vol. 41, No. 36, 2016, pp. 16287-16295. https://doi.org/10.1016/j.ijhydene.2016.06.082
- R. Banan, A. Bazylak, and J. Zu, "Effect of mechanical vibrations on damage propagation in polymer electrolyte membrane fuel cells", International Journal of Hydrogen Energy, Vol. 38, No. 34, 2013, pp. 14764-14772. https://doi.org/10.1016/j.ijhydene.2013.08.136
- Y. Hou, D. Hao, J. Shen, P. Li, T. Zhang, and H. Wang, "Effect of strengthened road vibration on performance degradation of PEM fuel cell stack", International Journal of Hydrogen Energy, Vol. 41, No. 9, 2016, pp. 5123-5134. https://doi.org/10.1016/j.ijhydene.2016.01.072
- H. E. U. Ahmed, R. Banan, J. W. Zu, and A. Bazylak, "Free vibration analysis of a polymer electrolyte membrane fuel cell", Journal of Power Sources, Vol. 196, No. 13, 2011, pp. 5520-5525. https://doi.org/10.1016/j.jpowsour.2010.10.112
- S. J. Imen and M. Shakeri, "Reliability Evaluation of an Open‐Cathode PEMFC at Operating State and Longtime Vibration by Mechanical Loads", Fuel Cells, Vol. 16, No. 1, 2016, pp. 126-134. https://doi.org/10.1002/fuce.201500144
- "Portable fuel cell p ower systems - safety", IEC 62282-5-1, 2007.
- "American national standard for portable fuel cell power systems", ANSI/CSA America FC3, 2004.
- "Testing methods for small polymer electrolyte fuel cell power systems", JIS C 8823, 2008.
- "Fuel cell technologies- Part 7-1:Single cell test methods for polymer electrolyte fuel cell (PEFC)", KS C IEC 62282-7-1, 2013.
- "Fuel cell technologies - Part 4-101:Fuel cell power systems for propulsion other than road vehicles and auxiliary power units(APU)-Safety of electrically powered industrial trucks", KS C IEC 62282-4-101, 2014.
- "Unmanned aircraft systems - Design for UAV", KS W 9001, 2018.
- A. H. Hosseinloo and M. M. Ehteshami, "Shock and vibration effects on performance reliability and mechanical integrity of proton exchange membrane fuel cells: A critical review and discussion", Journal of Power Sources, Vol. 364, 2017, pp. 367-373. https://doi.org/10.1016/j.jpowsour.2017.08.037
- D. E. Curtin, R. D. Lousenberg, T. J. Henry, P. C. Tangeman, and M. E. Tisack, "Advanced materials for improved PEMFC performance and life", Journal of Power Sources, Vol. 131, No. 1-2, 2004, pp. 41-48. https://doi.org/10.1016/j.jpowsour.2004.01.023
- A. Pozio, R. F. Silva, M. De Francesco, and L. Giorgi, "Nafion degradation in PEFCs from end plate iron contamination", Electrochimica Acta, Vol. 48, No. 11, 2003, pp. 1543-1549. https://doi.org/10.1016/S0013-4686(03)00026-4
- C. A. Reiser, L. Bregoli, T. W. Patterson, S. Y. Jung, J. D. Yang, M. L. Perry, and T. D. Jarvi, "A reverse-current decay mechanism for fuel cells", Electrochemical and Solid-State Letters, Vol. 8, No. 6, 2005, pp. A273-A276. https://doi.org/10.1149/1.1896466
- H. Tang, Z. Qi, M. Ramani, and J. F. Elter, "PEM fuel cell cathode carbon corrosion due to the formation of air/fuel boundary at the anode", Journal of Power Sources, Vol. 158, No. 2, 2006, pp. 1306-1312. https://doi.org/10.1016/j.jpowsour.2005.10.059
- G. Diloyan, M. Sobel, K. Das, and P. Hutapea, "Effect of mechanical vibration on platinum particle agglomeration and growth in Polymer Electrolyte Membrane Fuel Cell catalyst layers", Journal of Power Sources, Vol. 214, 2012, pp. 59-67. https://doi.org/10.1016/j.jpowsour.2012.04.027
- E. H. Park, J. H. Kim, J. H. Kim, Y. H. Kim, S. O. Han, Y. B. Keum, K. S. Jeong, and H. Z. Ko, "Contact Resistance of Current Collector for fuel cell by vibration", Proceedings of the KIEE Conference, The Korean Institute of Electrical Engineers, Vol. 2009, No. 7, 2009, pp. 2049-2050.
- "Vibration testing methods for automobile parts", KS R 1034, 2006.
- "Micro fuel cell power systems-Performance test methods", IEC 62282-6-200, 2014.
- N. Rajalakshmi, S. Pandian, and K. S. Dhathathreyan, "Vibration tests on a PEM fuel cell stack usable in transportation application", International Journal of Hydrogen Energy, Vol. 34, No. 9, 2009, pp. 3833-3837. https://doi.org/10.1016/j.ijhydene.2009.03.002
- W. R. Chang, J. J. Hwang, F. B. Weng, and S. H. Chan, "Effect of clamping pressure on the performance of a PEM fuel cell", Journal of Power Sources, Vol. 166, No. 1, 2007, pp. 149-154. https://doi.org/10.1016/j.jpowsour.2007.01.015